Instruction/ maintenance manual of the product 501 Yamaha
Go to page of 24
Natural Sound Compact Disc Player Thank you f or selecting this Y AMAHA Compact Disc Pla ye r . O WNER’S MANU AL CD C-90 1 / 50 1 CONTENTS Saf ety Instructions ......................................... 2 F eatures ...................................
2 SAFETY INSTR UCTIONS 1 Read Instructions – All the safety and operating instructions should be read before the unit is operated. 2 Retain Instructions – The safety and operating instructions should be retained for future reference. 3 Heed Warnings – All warnings on the unit and in the operating instructions should be adhered to.
3 1 To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future reference. 2 Install your unit in a cool, dry, clean place – away from windows, heat sources, and too much vibration, dust, moisture or cold.
FEA TURES ● 5-Disc Carousel A uto-changer ● Full Opening Disc T ra y f or Changing 5 Discs at a Time ● PLA YXCHANGE; Disc Changing Capability while Playing Another ● Random Access Programmab l.
5 When the LINE OUT (analog) terminals of this unit are used ( ➊ ) ● Be sure that the left (“L”) and right (“R”) LINE OUT terminals are connected to the corresponding (left and right) terminals of the amplifier or other component. ● Connect the “LINE OUT” terminals to the “CD” (or “AUX”) terminals of the amplifier.
6 POWER I2 3 4 5 SKIP/SEARCH +I0 I 2 3 4 5 6 7 8 9 0 PROG PLAYXCHANGE OPEN/CLOSE PLAY/ PAUSE STOP OUTPUT LEVEL DOWN UP PHONES DISC NATURAL SOUND COMPACT DISC PLAYER PEAK IDENTIFICA TION OF COMPONENTS FR ONT P ANEL * ( ) indicates the page number on which the control part is best described.
7 * ( ) indicates the page number on which the control is best described. REMO TE CONTROL TRANSMITTER CLEAR button (p. 15) OPEN/CLOSE button (p. 8) PROG button (p. 14) Numeric buttons (p. 10) DISC SKIP buttons (p. 8) SYNCHRO button (p. 17) SKIP buttons (p.
8 1 2 3 Close the disc tray 4 Select the disc play mode (1DISC or 5DISC) while watching the display. “1DISC” mode: The unit will play a designated disc only. “5DISC” mode: The unit will play all discs in the tray in sequence. 5 Start play from the first track of the disc 1.
9 Notes ● After closing the disc tray by pressing the OPEN/CLOSE button in the stop mode or after selecting any disc by using the DISC SKIP buttons, the display shows the total number of tracks and the total recorded time of the selected disc for a few seconds.
10 DIRECT PLA Y Select a desired track by using the numeric buttons. Example: To select track 25 Press ➀ twice, then immediately press ➁ once. * If a track number higher than the highest track number on the disc is selected, the last track on the disc will be played.
11 When the DISC SCAN button is pressed while this unit is stopped, this unit will play an early part of each disc in turn. Each disc is played for 8 seconds. If, during this play, you hear a disc that you want to listen to in entirely, press the DISC SCAN button once again or press the PLAY button to cancel this function.
12 OUTPUT LEVEL DOWN UP Normal illumination Slightly dim Dim DIMMER Changing brightness of the display You can change the brightness of the display by pressing the DIMMER button. PHONES OUTPUT LEVEL + – or (On the front panel) CDC-901 only Adjusting the level of signals output into an amplifier , etc.
13 1 2 Close the disc tray. 3 Select whether to play one disc or all discs in the tray. * If the “1DISC” disc play mode is selected, next select a desired disc by using the DISC SKIP buttons or a DISC - select button.
14 PR OGRAM PLA Y You can enjoy listening to your favorite tracks selected from one or more discs in any desired order using programmed play. ➀ Shows the program number for the track to be programmed next. ➁ Shows the selected disc and track number.
15 T o stop program play Press the STOP button. The first programmed track number will be displayed. To resume play, press the PLAY button. Play will begin from the beginning of the program. T o cancel a programmed sequence There are several methods, as described below.
16 1 Select a track which has index numbers. 2 3 Select the desired index number. T o cancel the index searc h function Press the INDEX button. Notes ● Not all discs have index numbers.
17 1 Select the disc. 2 Load a tape on the tape deck. CDC-901 only * The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) 3 This unit enters into the pause mode, and the tape deck enters into the REC/PAUSE mode.
18 1 Stop the unit. 2 Select the disc. 3 The peak level searching function of this unit is useful for adjusting recording level on the tape deck. (Refer to page 21.) 4 Enter the tape’s total possible recording time. You can select any of four tape lengths by pressing the TAPE button.
19 1 Stop the unit 2 If you will program tracks from more than one disc on the disc tray, make this unit display the total recorded time of each disc to be used in turn by pressing the DISC SKIP button. * This unit will read the contents of a disc by this operation.
20 ■ Random sequential tape pr ogramming The unit will automatically program tracks on a disc in random sequential order for recording to tape. 1 Follow step 1 – 5 on page 18. 2 * The unit will automatically program tracks for side A and side B separately considering the tape’s total time.
21 1 Stop the unit. 2 Select the “1DISC” disc play mode. 3 Select the disc. 4 The peak level searching is performed through the disc. Next, the part where the source level peaks is repeatedly played. Adjust the recording level on the tape deck listening to this repeat play.
22 NO TES ABOUT THE REMO TE CONTROL TRANSMITTER NO TES ABOUT HANDLING COMP A CT DISCS ● This compact-disc player is designed only for playing of compact discs bearing the mark. Never attempt to load any other type of disc into the unit. The unit will also play 3-inch (8-cm) compact discs.
23 AUDIO SECTION Frequency response .......................... 2 Hz – 20 kHz, ±0.5 dB Harmonic distortion+noise (1 kHz) < CDC-901 > .................................................. 0.003% or less < CDC-501 > ..........................
24 YAMAHA ELECTRONICS CORPORATION, USA 6660 ORANGETHORPE AVE., BUENA PARK, CALIF. 90620, U.S.A. YAMAHA CANADA MUSIC LTD. 135 MILNER AVE., SCARBOROUGH, ONTARIO M1S 3R1, CANADA YAMAHA ELECTRONIK EUROPA G.m.b.H. SIEMENSSTR. 22-34, D-25462 RELLINGEN BEI HAMBURG, F.
An important point after buying a device Yamaha 501 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Yamaha 501 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Yamaha 501 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Yamaha 501 you will learn all the available features of the product, as well as information on its operation. The information that you get Yamaha 501 will certainly help you make a decision on the purchase.
If you already are a holder of Yamaha 501, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Yamaha 501.
However, one of the most important roles played by the user manual is to help in solving problems with Yamaha 501. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Yamaha 501 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
