Instruction/ maintenance manual of the product DocuPrint t 180 Xerox
Go to page of 94
Xer ox Doc u P rin t 18 0 La se r Pr in ti ng Sys te m Syste m Genera tion Guide April 1998 721P8551 0.
Xerox Corpora ti o n 701 S. Aviation Boulevard El Segu ndo, CA 90245 ©1998 by Xerox Corporat ion. All righ ts reserved. Copyright protection claimed includes all forms and matters of copyrightable ma.
XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE iii Rela te d pu bl i ca ti o n s The Xerox DocuPrint 180 Laser Printing System – System Gene r ation G uide is part of the ten manua l reference set for your laser printing system. The entire reference set is listed in t h e table below.
iv XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE.
XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE v Table of Contents Related publications iii Notice iii Intr od ucti on vii About the reference set vii DocuPrint 180 Laser Printing Syst em document se t viii Document conventions xi 1. Sysg en o ve rview 1- 1 Resource and information checklist 1-3 2.
TAB LE OF C ONTE NTS vi XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE Performing a mini sysgen 4-27 Mini sysgen procedu re sum mary 4-27 Formatt ing a system di sk 4-30 Disk formatting summary 4.
XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE vii Introduc tion The Xerox DocuPrint 180 Laser Printing System—S ystem Gene r ation G uide is one of ten d ocume nts that make up the DocuPrint 180 Referenc e Set. The guide is divided into four chap ters and one appendix as listed.
INTRO DUC TIO N vi ii XEROX DOCUPRI NT 180 LPS S YSTEM GENERATION GUI DE Xer ox Do cu Print 18 0 L aser Pr int ing Sy st em D ocu m ent S et The Xerox DocuPrint 180 Laser Printing System document Set .
INTRODUCTION XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE ix Xero x DocuPrint 180 LPS Form s Creation Gui de This referenc e contains the following informat ion: • Basic conc ept s for creat in.
INTRO DUC TIO N x XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE Hel pf u l Fac ts Ab ou t Pa pe r This referenc e contains the following informat ion: • Selection and gui deline s • St or ag.
INTRODUCTION XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE xi.
xi i XEROX DOCUPRI NT 180 LPS S YSTE M GENERATION GUI DE.
XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 1-1 1. 1 Sysge n overvie w This chapter p rovides information on different types of sysgens, operating system soft ware (O SS), and t he resource informat ion needed whe n p erforming a system sysgen.
SYSGE N OVERVI EW 1-2 XE ROX DOCUPRINT 180 L PS SYSTE M GENERAT ION GUIDE OSS co ntents New versions of the operating syst e m soft ware (OSS) are distributed by Xerox on quarter inch cartridge (QIC ) tapes. These media cont ain the items listed in table 1-2.
SYSG EN OVE RVIEW XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 1-3 Re so urce and in fo rmati on ch eckl is t The f ollowing checklist will help you de termine if you hav e all the resources and informat ion neces sary to b egin a sysgen .
SYSGE N OVERVI EW 1-4 XE ROX DOCUPRINT 180 L PS SYSTE M GENERAT ION GUIDE.
XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 2-1 2. 2 Sysge n comman ds This chapter e xplains the com mands u sed for performing sysgens. Sysg en C om m and me nu The Sysgen Comm and menu, illustrated in table 2 -1, appears on the printing system di splay screen when you b oot the sysgen processor.
SYSGE N COMMA NDS 2-2 XE ROX DOCUPRINT 180 L PS SYSTE M GENERAT ION GUIDE Table 2 -2. Sysgen comm ands Comm an d Funct i on C OMM ANDS Displays the Sysgen Comm and me nu on the printing system display screen. (The menu does not have to display for you to ent er a comma nd.
SYSGEN COMMAN DS XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 2-3 Ent ering and ab breviating comm ands Refer to the following d irections whe n e ntering comm ands. En terin g com m and s Enter commands after the sysgen prompt character (>), then press <ENTE R> .
SYSGE N COMMA NDS 2-4 XE ROX DOCUPRINT 180 L PS SYSTE M GENERAT ION GUIDE.
XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 3-1 3. 3 Sample system con figurations Use the information provided in th i s chapter to select your configuration spec ifications. Stages of the sysgen pr oces s An overv iew description of t he sysgen process is shown in Table 3-1.
SAMPL E SYSTEM CONF IGURAT IONS 3-2 XE ROX DOCUPRINT 180 L PS SYSTE M GENERAT ION GUIDE Tab le 3- 2 shows a samp le syst e m confi gura tion f o r the DocuP rint 180 LPS.
SAM PLE SYST EM CO NFIG URATION S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 3-3 Co nfig ura tio n menu Table 3 -3 illust r ates a s ample configuration op tions menu fo r the DocuPr i nt 180 LPS. Note: The MICR, Ethernet, and Raster I m age Proce ssor option configurations are not supported on the Xerox DocuPrin t 180 LPS.
SAMPL E SYSTEM CONF IGURAT IONS 3-4 XE ROX DOCUPRINT 180 L PS SYSTE M GENERAT ION GUIDE Table 3 -4. Sample conf iguratio n s Option Descripti on 0) None Returns you t o the base system configuration di splay screen. 1) Full mem ory test Determines the amount of system memory test at power on.
SAM PLE SYST EM CO NFIG URATION S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 3-5 10) Lang uage Displays the following subopt ions: 0) NONE 1) U.
SAMPL E SYSTEM CONF IGURAT IONS 3-6 XE ROX DOCUPRINT 180 L PS SYSTE M GENERAT ION GUIDE 11) Paper size Displays the paper size me nu. Select paper size Size Inches Millimeters 1) US Letter 8.5 x 11.0 216 x 279 2) US Legal 8.5 x 14 216 x 356 3) A3 16.54 x 11.
SAM PLE SYST EM CO NFIG URATION S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 3-7 Addi tio na l sysg en par amet er s In add ition to the conf iguration op tions li sted previously, you may also need to supply the following information during the system generation proc ess.
SAMPL E SYSTEM CONF IGURAT IONS 3-8 XE ROX DOCUPRINT 180 L PS SYSTE M GENERAT ION GUIDE.
XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4-1 4. 4 Sysgen a nd sysgen-rela ted p r o cedur es This chapter con tains information to perform the system generation for t h e DocuPrint 180 LPS. It a lso explains how to install the PC UI syste m soft wa r e.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-2 XE ROX DOCUPRINT 180 L PS SYSTE M GENERAT ION GUIDE Ins tall ing and u pgrad in g Sy stem UI softw are Use the inform ation given below when installing o r upgrading System UI soft ware. Materi als req uired Syste m UI disk e tte .
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4-3 Ins tal ling o r upg ra ding Sys t e m U I dia log Use the inform ation given below when installing o r upgrading System UI dialog. Ti m e r equi r ed System UI dialog installation t akes a bout 5 m inutes to comp lete.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-4 XE ROX DOCUPRINT 180 L PS SYSTE M GENERAT ION GUIDE Per formi ng a full s ysg en Use the information g iven below when performing a f ull sysgen.
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4-5 Full sysgen p roced ure su mmary Use the following p rocedure w hen performing a full s ysgen. St ep 1. Back up any user files residing on the disks t o be formatted St ep 2.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-6 XE ROX DOCUPRINT 180 L PS SYSTE M GENERAT ION GUIDE 4. Format t he s ystem dis ks by en tering FORMAT or ERASE and pressing <ENTE R> .
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4-7 7. Enter the o ption numb er an d press <ENTE R> . Option 1 selects all disk drives installed on the controll er. Option 2 allows individual drives t o be sele cted.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-8 XE ROX DOCUPRINT 180 L PS SYSTE M GENERAT ION GUIDE 9. Enter 1 and pres s <ENT ER >. Entering 1 causes the formatting of the selected disks to occur.
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4-9 12. Key in SYSGEN an d pr es s <E N T ER>. * Sysgen program running * System ID is: xxxxx Do you want to enter a new system id? ’y’ or ’n’ 13. Enter N and <ENTER> to allow the sysgen to cont inue.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-1 0 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE 18. Enter ’ h’ ( for host/onl ine sysgen) or ’ t’ (for offline sysgen ) and press <ENTER >. NOTE: T h e syst e m response is for offline sysgen.
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4- 11 20. PC UI : Enter the month (MM), day (DD), and year (YY) in the ap propriate b oxes of the date window (use the <TAB> key to advance from box to box) and select the Apply/Close header but ton.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-1 2 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE 24. Apply any i ncremental patche s. Refer to the “Steps for load ing incremental p atches” section at the end o f th is c ha p ter . This completes a full sysgen.
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4- 13 Perf orming a n offl ine updat e sy s gen Use the information given b elow when performing a offline update sysg en.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-1 4 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE Ste p s to p er for m an off line upd ate sysgen using the AUTO comm and The f ollowing table list s the s teps u sed to perform an o ffline upd ate sysgen us ing the A UTO com mand.
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4- 15 5. Ke y i n Y and press < ENTE R>. This will be an auto sysgen Reading files from tape/host is displayed. Each file is r e ad from tape and placed on the disk.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-1 6 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE 8. The sys tem displ ays: **Applying sysgen patches** The following patches may be selected by PATCH-ID: PATCH-ID INVOKES -------- ------- MER001 Patch to allow Mergenthaler fonts only.
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4- 17 Ste p s to p er for m an off line upd ate sysgen using the S YSGEN c omma nd The f ollowing table list s the s teps u sed to perform an o ffline upd ate sysgen using the SYSG EN com man d.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-1 8 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE 6. E nter Y and <ENTER> to a llow the previous ly entered ID t o be changed. Key in the new ID and press <EN TER>. NOTE : W hen you enter no, s ysgen will continu e.
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4- 19 11. K ey in B (boot) and press <ENTER>. The OSS loads onto the system disk.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-2 0 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE 14. Enter t he patch ID ’ s that are needed f or the system and press <ENTER>, OR ju st press <E NTE R> .
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4- 21 Perf ormi ng an on line up date sysg en Use the following p rocedure w hen performing an online update sysg en.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-2 2 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE Ste ps to perf orm an onlin e update sysgen The f ollowing table list s the s teps u sed to perform online up date sysg en. Table 4 -5. Steps to perform an online update sysgen Step Acti o n System Resp on se 1.
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4- 23 5. Enter N t o re tai n t he e x isti n g ID or Y to enter a new system ID and press <ENTE R>. Do you want to save the accounting file? enter 'y' or ’n' 6.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-2 4 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE 9. For an o nline sys gen, Ent er H (host) and press <ENTER>. Request the host operator to vary the printing system online. Notes: You must use a host utility prog ram to advance the SST to the n ext-to-last file.
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4- 25 11. Key in B (boot) and press < ENT ER>. The OSS loads onto the syst em disk.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-2 6 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE 14. Enter the p atch ID’s that are needed f or the system and press <ENTE R>, OR just press <ENTE R>.
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4- 27 Perf orming a min i sy sgen Use the following p rocedure w hen performing a mini sysgen.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-2 8 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE Table 4 -6. Steps to perform a mini sysge n Step Action System r esponse 1. Pre ss the Bo ot button. : The Boot menu window displays: Operating System System Disk Reel to Reel QIC 18/36 Track Tape 2.
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4- 29 6. Key in B (boot) and press <ENTER> . The OSS loads onto the system disk. The syst em begins and com pletes the loading and testing process. When complete the following displays: OS1000 Ready For Commands hh:mm:ss 8.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-3 0 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE For matt in g a sy st em d isk Formatting a system disk is used whenever the fol lowing system changes occur: When to us e Y ou can us e th e FORM AT c ommand t o format one or more of the LPS sys tem disks and to flag any new bad block areas.
SYSGEN AN D SYS GEN-RELATED PROCEDURE S XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE 4- 31 Er asing a syst e m d i sk You can use the ERASE com ma nd to remove all files from the L PS system disks. Disks may be erased when: • A n ew system is generated from a SST.
SYSGE N AND SYSG EN-RELAT ED PROC EDURES 4-3 2 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE Step s fo r loadi ng in cr eme ntal pa tch es Table 4-7 lists the st e ps used for l o ading increm ental pat ches . Table 4 -7. Steps for loading incremen tal patches Step Action System response 1.
XEROX DOCUPRINT 180 LPS SYS TEM GENE RATION GUIDE A-1 A. A Sample JCL for transm ission of syste m softwa re tapes You m ust u se a h ost utilit y p ro gr a m to ad va n ce t he syst em software tape (SST) to the b eginning of the next-to-last and last files.
SAMPL E JCL FOR T RANSMISS ION O F SYST EM SO FTWARE TA PES A-2 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE.
XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLOSSARY-1 Gloss ary A3 Paper size measuring 297 by 420 mm. A4 Paper size measuring 210 by 297 mm. abort To term inate the printing of a job or execut ion of a program bef ore it comple tes. algorithm Com putational procedure that can be repeated any number of t imes.
GLOSSARY GLOSSARY-2 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE auxili ary menu Me nu that contains options not displayed in a window . The symbol for an auxiliary menu is a box containing three horizontal lines . B4 Paper size measuring 250 by 353 mm.
GLOSSARY XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLOSSARY-3 bit m ap V isual represent ation of graphic images in which a bit defines a picture element (pixel); for example, i f a bit is 1, the corresponding pixel is printed. bit map ped Display image generated bit by bit f or each point or dot.
GLOSSARY GLOSSARY-4 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE charac ter S ingle printable l etter (A-Z), n umeral (0 - 9), symbol (& % #), or punctuation m ark (, . ! ?) used to represent dat a. Characters can also be nonprinting, such as space, tab, or carriage ret u rn.
GLOSSARY XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLOSSARY-5 communi cation line Telecommuni ca tion line connecting devices at one location with devices a t ot her locations in orde r to t ransmit and rec eive info rma tio n.
GLOSSARY GLOSSARY-6 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE copy -sensitive Term used to indicate jobs in which multiple copies of a report will cont a in diff erent data , a s wit h payche cks a nd bankin g st atements . cpi characters per i nch.
GLOSSARY XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLOSSARY-7 descen der P ortion o f alphabetic character that extends below the baseline. See also ascender, x height. desktop Basic di splay screen of the PC UI. devic e Any piece of hardware oth er than the central processing unit (CPU).
GLOSSARY GLOSSARY-8 XEROX DOCUPRI NT 180 L PS SYSTE M GENERATION GUI DE emb edded blank s Blank spaces within a command line. ex te nde d m et ric s Measureme nts used in Interpress to alter the size of fonts, al lowing more precisi on with character esc apement.
GLOSSARY XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLOSSARY-9 commands, is stored on the system di sk as a perm anent file. It may be merge d with variable d ata by a form start c ommand. See a lso FDL; FS L . format 1. Layout of a docum ent, including margins , page length , line spacing, typefac e, and so on.
GLOSSARY GLOSSARY-10 XEROX DOCUPRI NT 180 LPS S YSTE M GENERATION GUI DE HCF high-capacity f eeder. Feeder tray ca pable of holding 250 0 sheets of 20 pound/75 gsm paper. The high-capac ity feeder trays are the primary pap er suppl y for the DP180 LPS.
GLOSSARY XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLO SSARY-11 inte rfa ce Dev ice by which t wo systems connect an d com municat e w ith each other. in te rpo la ti o n Series of logical rules impleme nted in the printer to convert a 300 spi input video stream to a 600 spi o utput video stream.
GLOSSARY GLOSSARY-12 XEROX DOCUPRI NT 180 LPS S YSTE M GENERATION GUI DE las er pri nt i ng Technology that uses a la ser to transfer character forms to a page by direct or i ndi rect means. lat en t i ma g e Static charge present o n the p hotoconduc tor before con tact with dry ink particles.
GLOSSARY XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLO SSARY-13 thus allowing more than on e logical page t o be placed on a phy sical page. lo go Smal l illustration o r desig n, usuall y simple, typically us ed t o ident ify a compan y. log off P rocedure b y which a us er ends a s ession.
GLOSSARY GLOSSARY-14 XEROX DOCUPRI NT 180 LPS S YSTE M GENERATION GUI DE messag e format consists of a head er (containing i dentifying a nd control informat ion), followed by the actua l message content, followed by a trailer (i ndi cating that the messa ge is completed).
GLOSSARY XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLO SSARY-15 offse t pri nt i ng Widely-used m ethod of c ommercial a nd corporate pri nting, where ink is picked up by a metal or paper plate, passed to an offset drum, and then p assed to the paper.
GLOSSARY GLOSSARY-16 XEROX DOCUPRI NT 180 LPS S YSTE M GENERATION GUI DE pag e ori e nta ti on Direction in which data is printed on a report. See also land scap e page orientation; portrait page orientation. par amet e r Part of a com mand , other than t h e keyword.
GLOSSARY XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLO SSARY-17 prin ter Out put de vice that produc es hard copy printouts . Also re ferred to as the I O T . print file Pos i tion o f t he syst em disk m emory (up to 4 MB) recei ved for temporary storage of formatted pages for pri n ting.
GLOSSARY GLOSSARY-18 XEROX DOCUPRI NT 180 LPS S YSTE M GENERATION GUI DE read/ write head Inp ut/output device t ha t rea ds and writ e s data i n the f o rm of magnetic dots on the surface of an external storage m edium , such as a magnetic di sk. rec ord Collection of data or words treated as a unit.
GLOSSARY XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLO SSARY-19 SEF short -edg e feed. The mov eme nt of paper through the printer i n the direction of the paper width (the shorter side of a s heet of paper). F or the DocuPrint 180 LP S, short-edg e feed allows larger sizes of paper (up to 11 by 17 inches/279 by 432 mm) to be printed.
GLOSSARY GLOSSARY-20 XEROX DOCUPRI NT 180 LPS S YSTE M GENERATION GUI DE statement Det ailed written instructions in a program step. A sta tement is written according to specif ic rules c alled syntax. static data Information usually found on preprinted forms or overlays.
GLOSSARY XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLO SSARY-21 system page Maximu m area in which text and graphics can be imaged on a printing system.
GLOSSARY GLOSSARY-22 XEROX DOCUPRI NT 180 LPS S YSTE M GENERATION GUI DE text string Consecutive series o f characters to be printed e xactly as specified in a comm and. thro ughpu t In data processing syst ems, the amount of data that can be processed, trans mitted, printed, and so on, per a specified unit of ti me.
GLOSSARY XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLO SSARY-23 utili ty pr ogram Gene ral-purpose p rogram that perf orms ac tivities, such as in itializing a disk or sort ing, which are not specific to any application .
GLOSSARY GLOSSARY-24 XEROX DOCUPRI NT 180 LPS S YSTE M GENERATION GUI DE x height Height of lowercase letters wi thout their ascenders or descen ders (height of lett e r “x”).
GLOSSARY XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLO SSARY-25 DEC Digital Equipment Corporation DFA Docum ent F eeding and F inishing Arc hitecture DJDE dynamic j ob d escriptor entry DO S di.
GLOSSARY GLOSSARY-26 XEROX DOCUPRI NT 180 LPS S YSTE M GENERATION GUI DE FS L forms source library FS T font specification table GCR group code recording gsm grams per square me ter HCF high-capacity .
GLOSSARY XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLO SSARY-27 JID job identifier JS L job sourc e library LAN local area network lase r light amplification by stimulated emi ssion of radiatio.
GLOSSARY GLOSSARY-28 XEROX DOCUPRI NT 180 LPS S YSTE M GENERATION GUI DE ppm pages per minute PQA print qu ality ad justment PROM programmable read-only memory PSC prin te r su bsyste m control ler pt.
GLOSSARY XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE GLO SSARY-29 tpi t ra cks per inch TPJ tes t p att er n jo b TXC total xerograph ic convergen ce UCS Universal Character Set UCSB Universal Ch.
GLOSSARY GLOSSARY-30 XEROX DOCUPRI NT 180 LPS S YSTE M GENERATION GUI DE.
XEROX DOCUPRINT 180 LPS SYSTEM GENE RATION GUIDE IND EX-1 Ind ex A abbreviating comma nds, 2-3 account f ile, 1-3 accounting file, 3-7 auto boot, 3-4 AUTO comman d, 2-2 auto sys gen, 1 -1 B backing up.
INDEX INDEX-2 XEROX DOCUPRI NT 180 LPS S YSTE M GENERATION GUI DE O online u pdate sysgen procedure summary, 4-17 purpose, 4-1 7 steps, 4-18 to 4-22 offline updat e sysgen, p erforming procedure summa.
An important point after buying a device Xerox DocuPrint t 180 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xerox DocuPrint t 180 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xerox DocuPrint t 180 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xerox DocuPrint t 180 you will learn all the available features of the product, as well as information on its operation. The information that you get Xerox DocuPrint t 180 will certainly help you make a decision on the purchase.
If you already are a holder of Xerox DocuPrint t 180, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xerox DocuPrint t 180.
However, one of the most important roles played by the user manual is to help in solving problems with Xerox DocuPrint t 180. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xerox DocuPrint t 180 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
