Instruction/ maintenance manual of the product C2424 Xerox
Go to page of 16
WorkCentre® C2424 Copier-Printer Copyright © 2005 Xerox Corporation . All Rights Reserved. 2-1 This chapter includes: ■ "Supported Media" on page 2-2 ■ "Loading Media in Tray 1&qu.
Supported Med ia WorkCentre® C2424 Copier-Printer 2-2 Supported Media This section includes: ■ "T ray and Media Usage Guidelines" on pa ge 2-2 ■ "Duplex Automati c Document Fe eder.
Supported Med ia WorkCentre® C2424 Copier-Printer 2-3 ■ Use only paper en velopes. Do not use en velope s with windows, metal clasps, or adhesi ves with release strips. ■ Do not print CD labe ls in this system. ■ When using pre-punc hed paper , load the paper so that the holes are on the right side of the tray .
Supported Med ia WorkCentre® C2424 Copier-Printer 2-4 For best results, use Xerox printing media recommende d for your W orkCentre C2 424 Copier- Printer. For the most cur rent informa tion about Xerox printing media, go to www .xerox. com/ off ice /c2424support .
Supported Med ia WorkCentre® C2424 Copier-Printer 2-5 Supported Envelopes Note All en velopes should be prin ted single-sided only . Use only paper en velopes. Do n ot use en velopes with windo ws, metal clasps, or ad hesiv es with release strips. Some wrinkling and embossing may occur when printing en velopes.
Supported Med ia WorkCentre® C2424 Copier-Printer 2-6 Media Storage Guidelines Providing a good en vironment, and safe handling and storage conditions for your paper and other media contrib utes to optimum print quality . ■ Store paper in dark, cool, relati vely dry lo cations.
Loading Media in Tray 1 WorkCentre® C2424 Copier-Printer 2-7 Loading Media in T ray 1 Use T ray 1 for a wide range of media including: ■ Plain paper ■ T ransparenc ies ■ Card stock ■ Labels .
Loading Media in Tray 1 WorkCentre® C2424 Copier-Printer 2-8 T o load paper or other media in T ray 1: 1. Open Tray 1 by pulling up and out on the handle.
Loading Media in Tray 1 WorkCentre® C2424 Copier-Printer 2-9 3. Insert the paper or other media into the tray . ■ Single-sided printing : Insert the side to be printed facedown with the top of page against the roller . ■ 2-sided printin g : Insert side one faceup with the bottom of the page against the roller .
Loading Media in Tray 1 WorkCentre® C2424 Copier-Printer 2-10 ■ En velopes : Insert en velopes with the flap side up and the flap to ward the left of the system. Slide the side guides until the arro ws on the guides match the appropriate en velope size.
Loading Media in Tray 1 WorkCentre® C2424 Copier-Printer 2-11 4. V erify that the paper is push ed against the roller until it stop s and verify that the side guides are pressed against the paper . 5. When prompted at the control panel: ■ If the paper size and type are correct, press the Enter button.
Loading Media in Tray 1 WorkCentre® C2424 Copier-Printer 2-12 6. Adjust the output tray for short or long media. F or media shor ter than 190 mm (7.5 in.
Loading Media in Trays 2, 3, and 4 WorkCentre® C2424 Copier-Printer 2-13 Loading Media in T rays 2, 3, and 4 Use T r ays 2, 3, and 4 for a wi de range of media including: ■ Plain paper ■ T ranspa.
Loading Media in Trays 2, 3, and 4 WorkCentre® C2424 Copier-Printer 2-14 2. If necessary , adjust the length and side pa per guides to match the size of the paper . ■ Press the sides of the length guide, then slide the guide until the arro w on the guide matches the appropriate paper si ze and clicks into place.
Loading Media in Trays 2, 3, and 4 WorkCentre® C2424 Copier-Printer 2-15 ■ Pre-pun ched Paper : Load pre-punched paper with th e holes ne xt to the right paper guide. Caution When using pre-punched paper , adjust print or copy mar g ins to accommodate the holes.
Loading Media in Trays 2, 3, and 4 WorkCentre® C2424 Copier-Printer 2-16 4. Insert the tray into the tray slot and push it completely to the back of the system. 5. If you changed the pap er type, select the tray paper type: a. On the control panel, press the Copy or Print b utton.
An important point after buying a device Xerox C2424 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xerox C2424 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xerox C2424 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xerox C2424 you will learn all the available features of the product, as well as information on its operation. The information that you get Xerox C2424 will certainly help you make a decision on the purchase.
If you already are a holder of Xerox C2424, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xerox C2424.
However, one of the most important roles played by the user manual is to help in solving problems with Xerox C2424. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xerox C2424 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
