Instruction/ maintenance manual of the product AD90 5 MFE XE Bertazzoni
Go to page of 24
1 INSTALLATION, MAINTENANCE AND USE INSTRUCTIONS FOR FREE-STANDING COOKERS 90x60 cm (type M92/M92V)Dual oven READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE. The manufacturer w ill not be responsible for any damage to property or to persons caused by incorrect installation or improper use of the appliance.
2 CONTENTS: INSTALLER TECHNICAL MA NUAL .................................................................................................... ........... pg. 2 Installing the cooker - Installation informa tion ..........................................
3 IMPORTANT INFORMATION FOR INSTALLING THE APPLIANCE The cooker can be installed separately, as a freestanding unit, or betw een kitchen units or betw een a kitchen unit and the w all. The dev ice must be installed in accord ance w ith the regulations stated in UNI 7129 and UNI 7131 standards.
4 ADAPTATION TO DIFFERENT TYPES OF GAS FOR COOKER Before performing any mainte nance operation, disconnect the appliance from the gas supply a nd electricity network.
5 Oven burne r adjustment : follow the instructions below to adjust the minimum: 1) Light the burner setting the knob to the MAXIMUM position. 2) Close the oven door and operate t he oven for at least 10 minutes. 3) Set the knob to the MINIMUM position (corresponding to 120°) and then remove it.
6 APPLIANCE MAINTENANCE ATTENTION: IMPORTANT WARNINGS For cookers resting o n a base ATTENT ION: If the cooker rests on a base, take the measures necessary to prev ent the cooker from sliding along the support base.
7 CONTROL PANEL DESCRIPTION On the control panel, small symbols show the function of each knob or key . Here as follow s are the sev eral controls that a cooker can h av e: the symbol o r shows the disposition of burners on t he w orktop, the full dot identifies the burner in object (in this case the front burner on the right).
8 unobstructed (Fig.3) and activ ating the mechanical aer ation dev ice/exhaus t hood or electric fan (Fig. 4 a nd Fig. 5). Intensive and continuous use of the appliance may require additiona l aeration, for example by opening a w indow, or more efficient aeration by increasing the pow er of the mechanical exh auster, if installed.
9 TABLE N°7 GAS OVEN COOKING TABLE TEMP °C HEIGHT MINUTES MEA T PORK ROAST 220 (210) 4 60-70 BEEF ROAST (YOUNG ST EER) 250 (240) 4 50-60 BEEF ROAST 240 (230) 4 60-70 VEAL ROAST 220 (210) 4 60-70 LAM.
10 elements to be used have been set, the oven el ements are turned on and off by the thermo stat; therefore, it is normal for the orange light to turn on and off while the oven is w orking. To turn off the electric oven set the switch knob to positi on 0 to prevent the thermostat from controlling the elements.
11 TABLE N°8 NATURAL CONVENTIONAL ELECTRIC OVEN COOKING TABLE TEMP °C HEIGHT MINUTES MEA T PORK ROAST 225 4/5 60-80 BEEF ROAST (YOUNG STEER) 225 4/5 60-80 BEEF ROAST 250 4/5 50-60 VEAL ROAST 225 4/5.
12 FISH 160-180 3 / 4 PA STRY FRUIT PI E 180-200 3 40-50 TEA CAKE 200-220 3 40-45 BRIOCHE S 170-180 3 40-60 SPONGE CAKE 200-230 3 25-35 RING CAKE 160-180 3 35-45 SWEET PUFF PASTRIES 180-200 3 20-30 RA.
13 Heat is optimally distribut ed inside the oven w hen the the rmometer dial has stopped. If the oven temperature drops or goes up, the thermometer dial will follow t hese variations in the same way. When the oven is turned off, the temperat ure on the thermometer will slow ly dr op until it reaches departure position.
14 F i g . 1 Fig. 3 Fig. 4 Fig. 5 Fig.6.
15 Fig.7.
16 Fig.8.
17 Fig.9A.
18 Fig.9B.
19 Fig.9C.
20 Fig.10 Fig.11 fig.12 fig.13.
21 fig.14 fig.15 fig.16 Fig. 17 Fig. 18 Fig. 19 T fig.20 fig.21 fig.21A fig.21B Fig.22 Fig.23 Fig.23 Fig.24.
22 Fig.24 Fig.25 Fig.26 fig.27 fig.27 fig.28 fig.29 Fig.30 Fig.30 Fig. 31 Fig. 31 Fig. 32 Fig. 32 Fig. 33.
23 Fig. 33 Fig. 34 Fig.35 Fig.36.
24 Cod. 310768.
An important point after buying a device Bertazzoni AD90 5 MFE XE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bertazzoni AD90 5 MFE XE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bertazzoni AD90 5 MFE XE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bertazzoni AD90 5 MFE XE you will learn all the available features of the product, as well as information on its operation. The information that you get Bertazzoni AD90 5 MFE XE will certainly help you make a decision on the purchase.
If you already are a holder of Bertazzoni AD90 5 MFE XE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bertazzoni AD90 5 MFE XE.
However, one of the most important roles played by the user manual is to help in solving problems with Bertazzoni AD90 5 MFE XE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bertazzoni AD90 5 MFE XE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
