Instruction/ maintenance manual of the product 701P98048 Xerox
Go to page of 16
S tacker 1000 Operator M anual 701P98048.
We l c o m e ! Congratulations on acquiring the Stacker 1000 . Team looks forward to supporting you and helping you increase your organizational productivity.
Stacker 1000 Operator Manual i Table of contents T able of content s Safety notes ....................................................... 1 Stacker overview ............................................... 3 Introduction ...............................
ii Stacker 1000 Operator Manual Table of contents.
Stacker 1000 Operator Manual 1 Safety notes Safety notes The Stacker 1000 is designed and tested to meet strict safety requirements. These requirements include safety agency examination and approval and compliance to any established environmental standards.
2 Stacker 1000 Operator Manual Safety notes Do not install the stacker where the floor or base is unstable. The stacker may fall, causing personal injury and/or serious damage to the stacker. Never spill liquid of any kind on the stacker. Do not allow anything to rest on the power cord.
Stacker 1000 Operator Manual 3 Stacker overview S t acker overview Introduction The Stacker 1000 is an optional finishing device which may be used with the 8830 printer, the 8830 Digital Document System (DDS), or the Productivity Centre 8233.
4 Stacker 1000 Operator Manual Stacker overview S t acker operation 6ZLWF KLQJRQWKHVWDF N HU The stacker is “switched on” by connecting the power cord to the power outlet. There is no power switch. The power cord is the on/off switch. Once the power cord is connected to the power outlet, the stacker motor drive and fan initialize.
Stacker 1000 Operator Manual 5 Stacker overview 0HGLDVWRU DJ HFRPSDU WPHQWV As stated before, the Stacker 1000 is equipped with two storage compartments. They are located on each side of the stacker. These storage compartments may be used to store media, prints, or other printer supplies, such as toner cartridges.
6 Stacker 1000 Operator Manual Problem solving Problem solving Jam clearance The stacker does not detect error conditions such as media jams. If a media jam occurs, the motor drive and blower switches off, and the stacker no longer accepts media. This is the only indication that the stacker is no longer functioning.
Stacker 1000 Operator Manual 7 Problem solving Moving the st acker Whenever you are required to move the stacker away from the printer, perform the following steps: 1. Move the stacker by pulling the entire stacker outward and away from the printer. 2.
8 Stacker 1000 Operator Manual Technical data T echnical dat a S t acker relocation The stacker must be moved by authorized personnel only . In order to ensure that the stacker operates reliably after moving it to a new location, consider the following guidelines: • The new location must provide minimum clearances around the stacker.
Stacker 1000 Operator Manual 9 Technical data 'LPHQVLRQV :HLJKW 100 lbs. (45.5 kg) +HLJKW 37.9 inches (963 mm) :LGWK 52.8 inches (1341 mm) 'HSWK 44.6 inches (1133 mm) 3ULQWHUPHGLDLQIRUPD WLRQ 0HGLDWSH • Bond (20 lb.
10 Stacker 1000 Operator Manual Technical data 3 RZHUFRQVXPSWLRQ 6WDQGE Less than 50 watts 5XQQLQJ 50 watts (0.80A rms at 115 VAC; 0.50A rms at 230 VAC) 7 HPSHU D WXU H 0LQLPXP 60 F (1.
It’ s illegal ,QWKH86$ It is against U.S. law to copy any material which is copyrighted without the permission of the copyright owner. However, if the copying falls within the “Fair Use” library reproduction rights of the copyright law, making copies is allowed.
Prepared by: Multinational Customer and Service Education 780 Salt Road Webster, New York 14580 Copyright© 1998 by Xerox Corporation. Allrights reserved. XEROX and all product names and number names are trademarks of XEROX CORPORATION. Other company trademarks are also acknowledged.
An important point after buying a device Xerox 701P98048 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xerox 701P98048 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xerox 701P98048 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xerox 701P98048 you will learn all the available features of the product, as well as information on its operation. The information that you get Xerox 701P98048 will certainly help you make a decision on the purchase.
If you already are a holder of Xerox 701P98048, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xerox 701P98048.
However, one of the most important roles played by the user manual is to help in solving problems with Xerox 701P98048. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xerox 701P98048 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
