Instruction/ maintenance manual of the product 212 DP/C Xerox
Go to page of 2
www.xerox.com Reference “About Xerox” Product Safety Data Sheet XEROX PRODUCT: XEROX 212 DP/C PSDS No. : 0819 XEROX 214 DP/C ISSUE DATE: 11/18/98 REV.
All measurements were made on products performing within established operating specifications and received recommended maintenance procedures. Xerox certifies that this product meets or exceeds the applicable standards for safety and emissions. www.xerox.
An important point after buying a device Xerox 212 DP/C (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xerox 212 DP/C yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xerox 212 DP/C - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xerox 212 DP/C you will learn all the available features of the product, as well as information on its operation. The information that you get Xerox 212 DP/C will certainly help you make a decision on the purchase.
If you already are a holder of Xerox 212 DP/C, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xerox 212 DP/C.
However, one of the most important roles played by the user manual is to help in solving problems with Xerox 212 DP/C. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xerox 212 DP/C along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
