Instruction/ maintenance manual of the product MRC88M Xantech
Go to page of 7
- 1 - QUICK START INSTRUCTIONS MRC88m & XT1 Multi-Room Controller and Tuner Integration DESCRIPTION This document describes how to integrate the XT1 with the MRC88m, usi ng Dragon-Drop software.
- 2 - ENABLING THE XT1 DRIVER 1) Open the Project Options dial og box (“File->Project Options”). 2) Select the “Sour ce Components” tab. 3) Select the “XT1” tab. 4) Click the “Enabled” check box to enable XT1-1. (N ote that the MRC88m s upports up to 6 XT1’s, denoted XT1-1 thru XT1-6.
- 3 - At this point you have successfully told the M RC88m that an XT1 is connected, and how it is connected..
- 4 - CONFIGURING THE MRC88m KE YPAD TO CONTROL THE XT1 The XT1 is controlled by using the new “Metadat a” Internal Commands. These new commands can be used to control the XT1, XIS1 00, the XMusic, and the iPort. S ee Figure 1 at the end of this document that describes how each Metadata in ternal command maps to the XT 1 function.
- 5 - 7) In the “Source” box, select “1 ”, since the XT1 we want to control is connected to Source 1. 8) Click the “Accept” Button. You have now successfully programmed the“ Ç PAUSE” button in Zone 1 perform the “Frequency Up” function of the XT 1.
- 6 - CONFIGURING SOURCE 1 CORRE CTLY FOR THE “AUTO CONFIGURATION” FEATURE OF THE SPLCD WHEN CONNECTED TO A MRC88m 1) On the Virtual Ke ypad, select SRC1. 2) On the right-hand portion of the Dragon window, select t he “Properties” tab near the bottom of the window.
- 7 - Figure 1: Below, Mapping the Internal Metadata commands to XT1 functions Figure 2: Below, Mapping the “Tuner” page bu ttons of the SPLCD-MRC-KP to the MRC88m Virtual Keypad buttons SPLCD But.
An important point after buying a device Xantech MRC88M (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech MRC88M yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech MRC88M - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech MRC88M you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech MRC88M will certainly help you make a decision on the purchase.
If you already are a holder of Xantech MRC88M, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech MRC88M.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech MRC88M. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech MRC88M along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
