Instruction/ maintenance manual of the product HDMI4X4 Xantech
Go to page of 14
HDMI4X4 USER MANUAL www .xantech.com.
CONTENTS 1 Introduction / Product Features / Package Contents 2 Panel Layouts 3 Operational Instructions 4 IR Remote Control Installation 5 EDID Con fi guration Guide 6 EDID Modes 7 Resolving IR con .
The 4X4 HDMI™ Matrix routes high de fi nition video in multiple resolutions up to 1080p plus multichannel digital audio from any of the four HDMI™ sources to the displays. Four outputs gives you the choice of sending high de fi nition audio and video signals up to four displays.
FRONT P ANEL LA YOUT -2-.
OPERA TION NOTES The 4X4 HDMI Matrix is housed in a metal box for better RF shielding. • The 4X4 HDMI Matrix works with all DVI and HDMI displays. • The 4X4 HDMI Matrix supports both AUDIO and VIDEO signals. • The 4X4 HDMI Matrix is fully HDCP compliant.
-4- RMT16-IR INST ALLA TION Remove battery cover from the back of the RMT16-IR remote. 1. V erify that DIP switches 1 & 2 are in the down (OFF) position. 2. Insert the battery; hold the battery so that you can see the positive 3. side facing up. The side that is not marked must be facing down.
-5- CUST OM EDID CONFIGURA TION VIA DIP SWITCHES Extended display identi fi cation data (EDID) is a data structure provided by a display to describe its capabilities to any source that asks for it.
-6- SETTING EDID MODES USING THE DIP SWITCH BANK : EDID Mode 0 (Switch 1=OFF Switch2=OFF Switch5=ON) -EDID is copied from the device connected to the fi rst active HDMI output port. - All features newer than HDMI 1.2 are cleared. EDID Mode 1 (Switch 1=ON Switch2=OFF Switch5=ON) -Same as Mode 0 and adds basic audio support.
In the event of IR con fl icts, please do the following: Remove the battery cover from the back of the RMT16-IR remote. 1. Locate the DIP Switches above the batteries. 2. Switch the DIP Switches on the RMT16-IR to any of the combina- 3. tions pictured below .
ASCII Binary 1 1 001 1 0001 2 2 001 1 0010 3 3 001 1 001 1 4 4 001 1 0100 5 5 001 1 0101 6 6 001 1 01 10 7 7 001 1 01 1 1 8 8 001 1 1000 9 9 001 1 1001 a 10 01 10 0001 b 1 1 01 10 0010 c 12 01 10 001 .
4X4 HDMI RACK MOUNT DIAGRAM -9-.
Video Ampli fi er Bandwidth 1.65 Gbps Input Video Signal 1.2 volts p-p Input DDC Signal 5 volts p-p (TTL) Single Link Range 1080p / 1920 x 1200 HDMI Input/Output Connector T ype A 19-pin Female Remote Control Port RS-232 Female, Mini-Stereo Power Consumption 60 watts (max) Power Supply 24V DC Dimensions 17” W x 1.
.
www .xantech.com.
An important point after buying a device Xantech HDMI4X4 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech HDMI4X4 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech HDMI4X4 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech HDMI4X4 you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech HDMI4X4 will certainly help you make a decision on the purchase.
If you already are a holder of Xantech HDMI4X4, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech HDMI4X4.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech HDMI4X4. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech HDMI4X4 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
