Instruction/ maintenance manual of the product DPC100 Xantech
Go to page of 6
08905106B - 1 - INSTALLATION INSTRUCTIONS DPC100 Doorbell / Paging Controller DESCRIPTION The DPC100 is a Doorbell / Paging Controller t hat can be combined with a MRC88CTL to provide whole-house paging and doorbell capabi lity.
08905106B - 2 - 1. Power supply connection. Be sure to use the included power supply only. 2. Doorbell Switch Input (lighted or non-lighted). Provides door chime over speakers (not polarity sensitive). This input can also be co nnected to a DCH4 for a unique front / back door chimes.
08905106B - 3 - APPLICATION.
08905106B - 4 - OPERATION A. Paging To page throughout the house/sma ll business, simply press # , then 7 (the letter “ P ” key on your keypad). Speak into the phone receiver and your vo ice will be heard throughou t the house or small business over the speakers.
08905106B - 5 - I. Door Chime (Doorbell Switch Input) With DIP switch 2 in the OFF position (see DIP Switch Programming , page 2), the doorbell input terminals on the DPC100 can be connected to a normally open sw itch (lighted or non-lighted doorbell buttons, etc.
08905106B - 6 - FCC REQUIREMENTS This equipment complies with Part 68 of the FCC rule s and the requirements adopted by the ACTA. On the side of this equipment is a label that contains, amo ng other information, a product identi fier in the format US:AAAEQ##TXXXX.
An important point after buying a device Xantech DPC100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech DPC100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech DPC100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech DPC100 you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech DPC100 will certainly help you make a decision on the purchase.
If you already are a holder of Xantech DPC100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech DPC100.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech DPC100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech DPC100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
