Instruction/ maintenance manual of the product 680-10 Xantech
Go to page of 4
1 Remote Control Switchers INST ALLA TION INSTRUCTIONS . The Model 680-10 is an IR Remote Controlled AC Switcher with six AC outlet receptacles. It accepts RC68+ (or RC68) IR Programmer commands coming from any Xantech IR receiver, keypad, or controller direct- wired to its IR Input port.
2 680-10 CAUTION: While the RC68+ can be used as a handheld remote control, it is highly recommended it not be given to the final user for the following reasons: • Since it includes adjustable code groups, the user may inadvertently alter the installer configurations.
3 Remote Control Switchers 680-10 NOTE: The 680-10 should normally be plugged into an unswitched AC outlet. However, if the power to the 680-10 is turned off by a power failure, or other means, the internal memory will retain the last selected switched condition for each of the outlets.
4 +12 VDC IR OUT GND 780-10 J-BOX RECEIVER OUT V IR RCVR PWR GS 795-20 Four Zone Amplified Connecting Block Satellite Receiver VCR MAIN ROOM, EQUIPMENT CABINET , ETC.
An important point after buying a device Xantech 680-10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech 680-10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech 680-10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech 680-10 you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech 680-10 will certainly help you make a decision on the purchase.
If you already are a holder of Xantech 680-10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech 680-10.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech 680-10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech 680-10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
