Instruction/ maintenance manual of the product 29195D Xantech
Go to page of 4
MODEL 29195D Hidden Link™ Shelf Top Plasma Proof IR Receiver INSTALLATION INSTRUCTIONS DESCRIPTION The Hidden Link IR Receiver is a sma ll shelf-top infrared repeater assembly. It includes an IR receiver and a CB12 Conne cting Block. The Hidden Link IR Receiver is equipped with a 7-foot cable and a 3.
CABLE CONNECTIONS 291’s may also be used where the 7-foot cable i s not long enough. Simply cut off the mini plug, strip the leads and spli ce them to a 3-cond uctor extension cable with a terminal block or other m ean s. Then connect the extension cable to the 3-terminal bl ock on the CB12 as shown in the figure below.
TROUBLE SHOOTING: 1. Perhaps the most common problem yo u may encounter is stray IR (infrared) or RF (radio frequen cy) inte rference preventing prope r operation of the controlled equipment. • Fluorescent, Compact Fluorescent, Ne on or Halog en lights, Neon Art, and light dimmers.
[BLANK PAGE] [BLANK PAGE].
An important point after buying a device Xantech 29195D (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Xantech 29195D yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Xantech 29195D - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Xantech 29195D you will learn all the available features of the product, as well as information on its operation. The information that you get Xantech 29195D will certainly help you make a decision on the purchase.
If you already are a holder of Xantech 29195D, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Xantech 29195D.
However, one of the most important roles played by the user manual is to help in solving problems with Xantech 29195D. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Xantech 29195D along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
