Instruction/ maintenance manual of the product N/A WTB
Go to page of 3
Maintenance, Service and Repair of LaserDisc Lite Hubs V 5 1. Before you start GENERAL WARNING: All WTB products should be installed and serviced by a qualified bicycle mechanic using appropriate professional tools. WTB assumes no liability for products which are improperly installed, removed, assembled, disassembled or configured.
3. Serviceable Parts.
4. Adjusting the bearings The LaserDisc Lite front hubs do not need adjustment. There is a small amount of play in the axle when the hub is not clamped in the fork, and this is normal. When the quick release is closed, the axle system will compress slightly and eliminate the play.
An important point after buying a device WTB N/A (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought WTB N/A yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data WTB N/A - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, WTB N/A you will learn all the available features of the product, as well as information on its operation. The information that you get WTB N/A will certainly help you make a decision on the purchase.
If you already are a holder of WTB N/A, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime WTB N/A.
However, one of the most important roles played by the user manual is to help in solving problems with WTB N/A. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device WTB N/A along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
