Instruction/ maintenance manual of the product 31897 Wright Manufacturing
Go to page of 23
Commercial Mower Owner’s Manual For the Wright Z serial #31897 and higher until superseded WARNING: READ THIS MANUAL BEFORE USING For your safety and for proper operation and maintenance read carefully and keep readily ava ilable for future reference.
Foreword Welcome to the progressive group of mowing professionals who use Wright mowers. We are focused on giving you advanced engineering and quality construction in each mower we build. This manual explains the features and promotes safer use of the mower.
TABLE OF CONTENTS PRE-DELIVERY SERVICE OF MOWER BY DEALER ............................................................. 1 SAFETY INSTRUCTIONS ......................................................................................................... 3 I NTRODUCTION .
* * This Page Intentionally Left Blank * *.
1 Pre-Delivery Service of Mower by Dealer If you are not completely famili ar with the Safety Instruction Manual read it now before pr oceeding with the Pre-Delivery Service of the mower. Only your authorized Wright dealer should perform the Pre-Delivery Service of the mower.
2 • Before starting the engine be ready to stop it if the wheels begin to turn with the brake on. (If this happens, check that the manual bypass valves on side of each pump are open at least a half-a-turn counterclockwise.) • Start the engine according to the engine manufacturer’s recommendation.
3 SAFETY INSTRUCTIONS WRIGHT MOWER USERS & OWNERS: RE AD THIS MANUAL BEFORE USING PLEASE BE CAREFUL! CAUTION This symbol with the word “CAUTION” indicates a potentially hazardous situation which, if not avoided, could result in minor or moderate injury.
4 WARNING User Clothing DO NOT operate the mower while wearing sandals, tennis shoes, sneakers, or shorts. Always wear long non-baggy pants. Wear high- top leather steel-toed work boots with thick, textured tread, soft-rubber soled at all times. Hard or smooth soled shoes are too slippery for a good footing on mower platform.
5 direct the grass discharge toward bystanders, traffic, cars or buildings nor allow anyone within 50 feet of the machine while in operation. Thrown objects can pass through glass wind ows and some walls of buildings. There is extreme risk of danger from thrown objects or being cut by the blades of the mower.
6 Operation In Reverse Keep both feet on the foot platform at all times. Look behind you before backing to prevent injuring yourself or anyone behind you. Operate the mower very slowly, inching it backward until you become familiar with how the mower operates.
7 WARNING depending on mowing environment, operator driving style and preference. • To reduce the chances of “popping-a-wheelie”, do not accelerate quickly. Note: Excessively worn tire tread is dangerous. Replace tire(s) with less than 3/32” of any tread groove left.
8.
9 OPERATING INSTRUCTIONS WARNING If you are not completely famili ar with the Safety Instruction Manual read it now before pro ceeding with the operation of the mower. REMEMBER THERE ARE CERTAIN PRECAUTIONS LISTED IN THIS MANUAL THAT YOU MUST NOW TAKE BEFORE STARTING THE MOWER.
10 slightly, forward and backward. Check to see if t he wheels move forward and backward according to the position of the levers. If not, check to see that the pump release valves are closed. The pump release valves are accessible by lifting the seat.
11 How to Adjust Neutral Neutral refers to the mower movement when the engine is set to full throttle, parking brake is off, and the control levers are in the neutral position. The mower should not move forward or backward during this time. If the mower is moving forward or rearward, the neutral setting must be adjusted.
12 WARNING Service and Adjustments Tire Maintenance and Pressure Excessively worn tire tread is dangerous on all hills. Replace drive tires with less than 3/32” of any tread groove left. Use tires with the tread pattern recommended by Wright Mfg., Inc.
13 battery charger for proper and safe charging of the battery. Always make sure the Positive terminal is connected to the Positive battery post and the Negative terminal is connected to the Negative battery post. Reversal could cause damage to the electrical system.
14.
15 Maintenance Interval Chart MA I NTENANC E I TEM E N G I N E I T E M S S E E N O T E B E L O W FI R S T 8 H O U R S D A I L Y E V E R Y 2 5 H O U R S E V E R Y 1 0 0 H O U R S E V E R Y 2 0 0 H O U .
16.
17 Maintenance Record Dat e M ai nt enance/ Servi ce Perf ormed Un it Ho u r s Shop/ T echni ci an.
18 Wright Manufactur ing, Inc. ( herein after: WMI) warra nts to t he origin al owner th at the new WMI mower accompanying this document will be free from manufacturing d efects in mat erials or workmanship subject to the following limitations and exclusions.
4600X Wedgewood Blvd Frederick, MD 21703 www.wrightmfg.com.
An important point after buying a device Wright Manufacturing 31897 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wright Manufacturing 31897 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wright Manufacturing 31897 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wright Manufacturing 31897 you will learn all the available features of the product, as well as information on its operation. The information that you get Wright Manufacturing 31897 will certainly help you make a decision on the purchase.
If you already are a holder of Wright Manufacturing 31897, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wright Manufacturing 31897.
However, one of the most important roles played by the user manual is to help in solving problems with Wright Manufacturing 31897. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wright Manufacturing 31897 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
