Instruction/ maintenance manual of the product 14SH654 Wright Manufacturing
Go to page of 28
Commercial M ower Owner’s Manual For Sport X Serial Numbers 55864 a nd Higher Until Superseded WARNING: READ THIS MA NU AL BEFORE USING Revised 7/2011 For your safety and for proper operation and maintenance read carefully and keep readily available for f uture reference.
Foreword W elc ome to the progressive group of mowing professionals who u se W right m owers. W e are focused on giving you advanced engineering and quality construction in each mower we build. This manual explains the f eatures and promotes safer use of the mower.
TABLE OF CON TENTS P RE -D ELIV ERY S ERVICE OF M OWER BY D EALER ......................................................................................................................... 3 S AFETY I NSTRUCTIONS .......................................
3 PRE-DELIVERY SERVICE OF MOWER BY DEALER Before proceeding with the Pre-Delivery Service of your mower, please read the safety instruction s manual in its entirety. Only your authorized Wright dealer should perform the Pre-Delivery Service of the mower.
4 Before testing t he blade clutch/ brake operat ion, make sure the ar ea is clear an d there is nothin g vulnerable to possible thrown objects fro m under the mower. No one shou ld be near the mow er deck or in its line of discharge at t his or at any t ime.
5 SAFETY I NSTRUCTIONS WRIGHT MOWER USERS & OWNERS: READ THIS MANUAL BEFORE USING PLEASE BE CAREFUL! Introduction This mower is bui lt to the highest standards in t he industry. However, carelessness or operator error may result in ser ious bodily injury or death.
6 WA RNING User Clothing DO NOT operate the mow er while wearing san dals, tennis shoes, snea kers, or shorts. Alway s wear long non-baggy pants. W ear high-top leather steel-to ed work boots with t hick, textured t read, soft-rubber soled at all ti mes.
7 Initial Operating S afety Guidelines • Read and understand t he warnings on the instrument panel o f the mow er. • Keep a firm hold on t he stationary handle at all times. • Keep both feet on the f oot platfor m at all times. • Know the controls and how to stop quickly.
8 Zero-Radius Turn Operation During zero-rad ius turns (when one mower whee l rotates backwards while the ot her rotates forw ard) drive extra slow ly to reduce the poss ibility of losing traction, or contro l, or becomin g dizzy . This will help prevent y ou from being thr own off the mower.
9 where fumes may reach an open flame or spar k. Allow the engine t o cool befor e storing in any enclosure. (Drain fuel to a ½ tank when perform ing maintenance or repa irs that require the unit to be tilted) Hydraulic Safety Keep body and h ands away from pin holes or fitting s that eject hydrau lic fluid under high pressure.
10 OPERATI NG INSTRUCT IONS If you are not completely familiar with the Safety Instruction Manual read it now before proceeding with the operation of the mower. REMEMBER THERE ARE CERTAIN PRECAUTIONS LISTED IN THIS MANUAL THAT YOU MUST NOW TAKE BEFORE STARTING THE MOWER.
11 Use caution if it is y our first time. Now try moving the hand control lever s, one at a time, very slightly, forward and backw ard. Gradua lly increase your speed until y ou are well acqua inted with t he operation of the ha nd controls and the mower’s behavior.
12 this time. If the m ower is movi ng forward or rearward, the neutra l setting must be adjusted. The hydraulic pump has a R eturn-to-Ne utral (RTN) device built into t he linkage of the pu mp. Be fore adjusting neutral, it is necessary to lift the rear dr i ve wheels off the gro und using a jack a nd stands.
13 of discharge. Th e discharge chute d eflector shou ld be in the down pos ition. The par king brake shou ld now be applied. M ove the engine t hrottle to ¾ speed setting.
14 Belt Tension Ad justment The pump drive be lt is self- adjusting, and requ ires no adjustment, just rep lacement. The blade drive belt is self-adjusting als o and requires no ad justment, just replacement. Replacing the Cutter Deck Belt • Stop engine and remove the key and wait for all moving parts to stop.
15 Seat A d justments The Sport X seat is equipped with the ability t o adjust the seat up a nd down as well as lock the seat in the down pos ition to av oid seat bounce while standing. (F igure 1) Height Adjustment: • Loosen lower seat mounting hardware, • Removing upper bolts.
16 Bleeding A ir from the H ydraulic S y stem W hen ever serv i cing the hy draulic system, it is of the utmost importance to keep a ny dirt or de bris from getting into the system .
17 Crit ical A ppli c at i o n M od el s Th read Lo cker To rque Ra ng e ( f t- l b s) Wh ee l m otor bol ts (Secu r i n g m ot or to su pport ) Bi g/Smal l Stan der, St an der X, S port X, R H , WSES.
18 71440001 - B LADE 18 " 71440002 - B LADE 16. 5” 71440003 - BLADE 21” 71440008 - B LADE, F USION, ½” OFFSET 16.5” 71440009 - B LADE, F USION, ½”OFFSET 18" 71440010 - B LADE, F USION, ½” OFFSET 21" 71440011 - B LADE, CE ROLLED AIRFOI L LOW LIFT 16.
19 P/N Descri p ti on 1 3 99 00 1 7 M A CH B U SH , 7/8 I D X 1 3/ 8 OD X 1 4 G A 1 3 99 00 2 4 W A SH ER , N EO PREN E 1 4 99 00 0 2 H BU SH SM A L L 1 7 46 00 0 5 BU SH I N G , RU B BER, .
20 M A INT ENA NCE I TEM E N G I N E I T E M S S E E N O T E B E L O W F I R S T 8 H O U R S D A I L Y E V E R Y 2 5 H O U R S E V E R Y 1 0 0 H O U R S E V E R Y 2 0 0 H O U R S E V E R Y 3 0 0 H O U.
21 Date Maintenance/Se rvice Performed Unit Hours Shop/Technician Mainte nance Record.
22 76490099 DECA L, SPORT X 76490047 DECAL, SMALL, LEFT DASH 76490048 DECAL, SMALL, RT DASH 76490055, DECA L, QUAD LEVER, CE 76460001 DECA L, DANGER BLADE HA ZARD 76490001 DECA L, SHIELD MISSING 76490.
23 Wright Manufactu ring, Inc. (hereinafter: WMI) warrants to t he o riginal owne r that the n ew WMI mower accompan ying this document will be free from manufacturing defects in materials or workmanship s ubject to the following limitations and exclusions.
24 P ro b l em D es c rip ti on Po s s ib l e C au s e S o lu ti o n Str e akin g is w he n stri p s of u n cut gr a ss a re le f t be h in d. Bla de s a re no t sh a r p Sh ar pe n b la de s Bla de s.
FEDERAL AND C ALIFORNIA EMISSION CONTRO L WARRANTY ST ATEMENT YOUR WARR ANTY RIGHTS AND OBLIG ATIONS The United States Envi ronmental Protection Agency (EPA), Cali fornia Air Resources Board (CARB) and W ri ght Manufacturing, Inc. ( W MI) are pleased to ex plain the evaporative emission control system (EECS) warranty on your 2011 comme rcial mower.
(3) Any warranted part that is scheduled for replacement as required maintenance in the written instructions supplied is warranted for the period of time before the first scheduled replacement date for that part.
4600X W edgew ood Blvd Frederick, MD 21703 www.wrightmfg.com.
An important point after buying a device Wright Manufacturing 14SH654 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wright Manufacturing 14SH654 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wright Manufacturing 14SH654 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wright Manufacturing 14SH654 you will learn all the available features of the product, as well as information on its operation. The information that you get Wright Manufacturing 14SH654 will certainly help you make a decision on the purchase.
If you already are a holder of Wright Manufacturing 14SH654, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wright Manufacturing 14SH654.
However, one of the most important roles played by the user manual is to help in solving problems with Wright Manufacturing 14SH654. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wright Manufacturing 14SH654 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
