Instruction/ maintenance manual of the product 829E Berkel
Go to page of 16
16 • 829E O WNER /O PERATOR M ANUA L 2 :1(5 2 3(5$ 725 0 $18 $/ IMPORTANT NOTICE This manual contains Important Safety Instructions which must be strictly fol- lowed when using this equipment.
829E O WNER /O PERATOR M ANUAL • 15 B EFORE U SING T HIS E QUIPMENT Berkel’ s slicers are designed to slice meat and other food products safely and ef ficiently . However , unless the operator is properly trained and super- vised, there is the possibility of a serious injury .
829E O WNER /O PERATOR M ANUAL • 1 T ABLE OF C ONTENTS Page General Safety Instructions ....................................................................................................... 2- 3 Equipment Description ..........
PELIGRO CUCHILLA FILOSA para evitar serios accidentes a su persona siga las instrucciones de este manual y 1. NUNCA utlice esta mçquina sin previa instrucciùn y autorizaciùn de su supervisor . 2. LA MçQUINA DEBE apoyarse sobre un nivel solido y plano.
W ARNING SHARP KNIFE BLADE to avoid serious personal injury follow all the instructions in this manual and 1. NEVER touch this machine without training and authorization by your supervisor. 2. MACHINE MUST BE on solid level support. 3. GUARDS MUST BE in place before plugging in and turning on machine.
4 • 829E O WNER /O PER A TOR M ANU AL 0 2'(/ $ Sharpener Pusher Product Table Center Plate Center Plate Locking Knob Thickness Control Knob Table Start/ Stop Switch Product Table H.
829E O WNER /O PER ATOR M ANU AL • 5 W ARNING To avoid serious personal injury, properly install slicer in adequate work area • ALWAYS use a qualified technician for installation. • ALWAYS install slicer in work area with adequate light and space.
6 • 829E O WNER /O PER A TOR M ANU AL 2. Plug the power cord into a grounded 120V AC electrical outlet. 3. Slide the product table back and forth holding on to the Product Table Handle. If there is any rough operation or obstruction, shut off, unplug power cord and call your Berkel serviceman.
829E O WNER /O PER ATOR M ANU AL • 7 4. Check the stones. If they do not turn freely, are greasy or are full of metallic build-up, they must be cleaned. (See “Cleaning the Sharpening Stones,” page 7). If the stones are cracked or chipped they must be replaced.
8 • 829E O WNER /O PER A TOR M ANU AL Berkel recommends that a spare set of stones (Berkel Part #825-00112 be kept available for thorough cleaning procedures, and in case of breakage, so you will not lose your sharpening capabili- ties. C LEANING & S ANITIZING 1.
829E O WNER /O PER ATOR M ANU AL • 9 2. Place a drop of Berkel Food Machine Oil on the threads of the center plate knob. 3. Insert center plate locking knob and tighten. Make snug but DO NOT overtighten. 4. Replace slice deflector. 5. Replace product table.
1 0 • 829E O WNER /O PER A TOR M ANU AL 5. Loosen the sharpener locking knob, raise and rotate the sharpener until the stones sit with one on each side of the knife. Retighten the knob to hold the sharpener in its sharpening position. 6. Plug in the slicer and switch on the power.
829E O WNER /O PER ATOR M ANU AL • 11 Knife not sharpening 1. Are sharpening procedures being followed exactly as explained in this manual (page 10). 2. Are sharpening stones clean? If not, clean according to instructions given in “Sharpener Maintenance” section (page 7).
12 • 829E O WNER /O PER A TOR M ANU AL 5 (3 $,5 3 $576 5 (3 $,5 6 (5 9,&( Please contact your Designated Berkel Service Location for any repair parts and/or repair service required on your Berkel slicer.
.
BK46709 (December 2006) W arranty Effective: February 14, 2002 Berkel Company (“Berkel”) warrants to the Buyer of new equipment that said equipment, when installed in accordance with our instructions and subjected to normal use, is free from defects in material or workmanship for a period of one (1) year from the date of sale.
An important point after buying a device Berkel 829E (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Berkel 829E yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Berkel 829E - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Berkel 829E you will learn all the available features of the product, as well as information on its operation. The information that you get Berkel 829E will certainly help you make a decision on the purchase.
If you already are a holder of Berkel 829E, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Berkel 829E.
However, one of the most important roles played by the user manual is to help in solving problems with Berkel 829E. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Berkel 829E along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
