Instruction/ maintenance manual of the product W1775 Woodstock
Go to page of 20
Phone: (360) 734-3482 • Online Technical Support: tech-support@shopfox.biz COPYRIGHT © JUNE, 2007 BY WOODSTOCK INTERNATIONAL, INC., REVISED DECEMBER, 2007 (JM) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC.
.
Model W1775 Nailer/Stapler Kit -1- Saf ety In st ruct ion s f or Pne uma ti c T ools 1. KEEP ALL SAFETY DEVICES IN PLACE and in working order. 2. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking to see that keys and adjusting wrenches are removed from tool before operation.
Model W1775 Nailer/Stapler Kit -2- 10. USE PROPER AIR HOSE for the tool. Make sure your air hose is in good condition and is long enough to reach your work without stretching. 11. WEAR PROPER APPAREL. Do not wear loose clothing, gloves, neckties, rings, bracelets, or other jewelry which may get caught in moving parts.
Model W1775 Nailer/Stapler Kit -3- 1. HAND INJURIES: Do not place your hands near the nail/staple point of entry. A nail/staple can deflect and tear through the surface of the workpiece, puncturing your hand or fingers. 2. COMBUSTIBLE GASES: Never connect the nailer/stapler to pressurized oxygen or other combustible gases as a power source.
Model W1775 Nailer/Stapler Kit -4- No list of safety guidelines can be complete. Every shop environment is different. Always consider safety first, as it applies to your individual working conditions. Use this and other tools with caution and respect.
Model W1775 Nailer/Stapler Kit -5- The Mo del W1 775 is designe d to be oper ated at 6 0- 100 PSI using clean , dr y , regulated, compres sed a ir . D o no t exceed t he 1 20 P SI max imum o perating pressure for you r mo del.
Model W1775 Nailer/Stapler Kit -6- SETUP In ve n tory Figure 2. Model W1775 inventory. This tool has b een caref ully packag ed for saf e transpo rtation. If you notice the tool has been damaged dur ing s h ipping, please contact your author ized S hop F ox d eal er immediately .
Model W1775 Nailer/Stapler Kit -7- A s af ety mechanism on the no se of the nail er / stapler protects against accid ental firing. When the trigger is pressed, the nail er / stapler will n ot fire u nti l the s af et y nose me chanism is depress ed.
Model W1775 Nailer/Stapler Kit -8- OP ER A T ION S Loa ding Whe n replacin g brad nails in your Mo del W1 7 75 , foll ow these guidelines: Gauge: 18 Brad Length: 5 ⁄ 8 "-2" Staple Length: 5 ⁄ 8 "-1 5 ⁄ 8 " (crown 1 ⁄ 4 ") Capacity: 100 T o load your nailer/sta pler , do t hese step s: 1.
Model W1775 Nailer/Stapler Kit -9- 5. Pull the trigger. — If the nail/staple drove into the wood far enough, continue with your intended operations. 2. To test for proper nail penetration, hold the nailer/stapler perpendicular to the surface of a piece of clean scrap wood that is thick enough for the length of nails/staples you have loaded.
Model W1775 Nailer/Stapler Kit -10- A jamm ed nail or sta ple must be clear ed before u sing th e nailer /stapler again. To clear a jammed nail or staple from the magazine, do these steps: 1. DISCONNECT NAILER/STAPLER FROM THE AIR SUPPLY! 2. Unlock the catch lever and pull the magazine pusher back completely.
Model W1775 Nailer/Stapler Kit -11- Re pl ac ing Pist on an d O-Rings Under heav y us e , a piston or piston shaft may wear out. Repl acement is quick and easy . Contact your auth orize d Sh op Fox dealer to obtain th e Pisto n Repair Kit (par t nu mber X 1 7 750 01 ).
Model W1775 Nailer/Stapler Kit -12- C L E AN ING & L UBRICA T ION C le an ing Discon nect the na iler /stapler from the air sup ply before cleaning. Us e a good solvent to clean the nose ass embly of the nail er / stapler . Al ways be s ure that the nail er / stapler is dr y before usin g it aga in.
Model W1775 Nailer/Stapler Kit -13- P ARTS BREAK DO WN .
Model W1775 Nailer/Stapler Kit -14- P ARTS L IST REF PART � # DESCRIPTION REF PART � # DESCRIPTION 1 X1775001 PISTON � REPAIR � KIT 44 X1775044 RETAINER � SNAP 2 X1775002 CARRYING � CASE 4.
Model W1775 Nailer/Stapler Kit -15- T r o ub l es hoo ti ng Symptom Possible Cause Cause Possible Solution Air leaking at trig ger valve area. 1. O-rings in trigger valve housing are damaged. 1. O-rings must be replaced & operation of safety nose must be checked.
.
CUT ALONG DOTTED LINE Name ___________________________________________________________________________________ Street __________________________________________________________________________________.
TAPE ALONG EDGES--PLEASE DO NOT STAPLE FOLD ALONG DOTTED LINE WOODSTOCK INTERNATIONAL INC. P.O. BOX 2309 BELLINGHAM, WA 98227-2309 Place Stamp Here FOLD ALONG DOTTED LINE.
An important point after buying a device Woodstock W1775 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Woodstock W1775 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Woodstock W1775 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Woodstock W1775 you will learn all the available features of the product, as well as information on its operation. The information that you get Woodstock W1775 will certainly help you make a decision on the purchase.
If you already are a holder of Woodstock W1775, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Woodstock W1775.
However, one of the most important roles played by the user manual is to help in solving problems with Woodstock W1775. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Woodstock W1775 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
