Instruction/ maintenance manual of the product W1217 Woodstock
Go to page of 2
Planer Preparation 1. Disconnect the planer from its power source. 2. Remove the planer’s dust cover. 3. Remove the chip deflector and loosen the springs holding the chipbreaker down, if necessary. Loosening the springs will allow the chipbreaker to be raised to expose a larger portion of the cutterhead, where space is a limiting factor.
Setting The Knives Now that the Planer Pal ® Jigs are properly adjusted for your planer, the knives can be replaced. You’ll achieve the best results by removing and replacing knives one at a time, leaving the rest tightened in place. TO SET YOUR KNIVES 1.
An important point after buying a device Woodstock W1217 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Woodstock W1217 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Woodstock W1217 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Woodstock W1217 you will learn all the available features of the product, as well as information on its operation. The information that you get Woodstock W1217 will certainly help you make a decision on the purchase.
If you already are a holder of Woodstock W1217, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Woodstock W1217.
However, one of the most important roles played by the user manual is to help in solving problems with Woodstock W1217. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Woodstock W1217 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
