Instruction/ maintenance manual of the product 1023000 Woods Equipment
Go to page of 24
I NST AL LA TION MAN U AL SA VE THIS MANU AL! Include it with the backhoe manual. It contains safety , operation, and repair part information not found in other manuals.
2 Introduction SFMK (Rev . 6/6/2005) T O THE DEALER : Assemb ly and prop er installation of this produc t is the resp onsibil ity of the Woods ® dea ler .
Safety 3 4-Point SFMK (Rev . 5/8/2006) S AFETY RULE S ATTENTION! BECOME ALER T! Y OUR SAFETY I S IN VOLVED! This Sub-Frame Mounting Kit is only fo r the backhoes and tractors specified in the Su b-Frame Mount Installation secti on of this manual .
4 Safety 4-Po int S FMK ( Rev . 5/8 /20 06) SAFETY RULES ATTENTION! BECOME ALER T! YOUR SAFETY IS IN V OLV ED! (Safety R ules co ntinued from previous page) Make su re all h ydraulic hoses, f ittings, and valves are in good condition and not leaking before st arting power unit or using equipment.
Inst allation 5 MAN057 9 (1/19/ 2007) BACKHOE SUB-FRAME INST ALLA TION T ractor Prep aration ■ Only us e 1023000 4-Po int Sub-F rame M ount- ing Kit for mounting Woods BH90-X backhoe on Kubot a ® M8 540 and M9540 2W D and F W A cab tractor s with either Woods LU 132, 1020 , 1027 loaders or Kubota LA1 153 loader .
6 Installation MAN05 79 (1/19/20 07) Inst all Cylinder Bracket s 1. Att ach cyl inder br acket ( 22) to th e right side of t h e axle hous ing and cy linder usi ng tractor hardwa re previo usly re moved. 2. Repe at step to inst all se cond cylind er bracket on left side of t ractor .
Inst allation 7 MAN057 9 (1/19/ 2007) Inst all Right and Lef t T ractor Bracket s 1. Hook right t ractor bracket (1 ) over re ar axle. Secu re to the bottom of the axle housing us ing four cap scr ews (15) and harde ned flat washer s (17). 2. Place space rs (9) betwee n cylinde r bracket (2 2) and trac tor bracke t (Figure 6).
8 Installation MAN05 79 (1/19/20 07) Inst all Crossmember 1. Place c rossmemb er (7) in front o f drawbar bracke t and secur e using tw o cap scr ews (15) and hard ened flat wa shers ( 17).
Inst allation 9 MAN057 9 (1/19/ 2007) Att ach Backhoe B racket s to Ba ckhoe NOTE: Leave all hardware l oose until backhoe has been mount ed to the tractor .
10 Installation MAN05 79 (1/19/20 07) HYDRAULIC INST ALLATION Keep hands and body away from pres surized lines. Use p aper or cardboard, not hands or other body p arts to check for leaks. W ear safety gog- gles. Hydrauli c fluid under pressure can easily penetrate skin and will cause ser ious injury or death.
Inst allation 11 MAN057 9 (1/19/ 2007) Inst all Hydraulic Fittings and Hoses (Continued) 4. Locate t he hydr aulic t ee on the right side of the tractor an d remove the hydr aulic c ap (Fi gure 12). 5. Route hose ( 2) over rear a xle and connec t oppo- site end of hose to hydraul ic tee ( Figure 13) .
12 Installation MAN05 79 (1/19/20 07) Inst all Backhoe V alve Hoses 1. Install adap ters (8) to the bac khoe va lve I N and OUT ports. 2. Att ach mal e quick co upler (6) to the end of ho se (3). 3. Attach oppo site end of hos e (3) to back hoe valve IN port.
Inst allation 13 MAN057 9 (1/19/ 2007) Mount Backhoe to T ractor This mounting kit is designed to provide secure moun ting and adequ ate operator c lear- ance for most operators when properly installed. Check clearance dimensions shown below to be sure you have installed seat bracket correct ly .
14 Installation MAN05 79 (1/19/20 07) Mount Backhoe to T r actor ( Continued) Refer to Figure 17. 4. Using th e backh oe hydr aulics, p osition the b ack- hoe brackets at a s light angle , appro ximately 5- to 10-degrees .
Inst allation 15 MAN057 9 (1/19/ 2007) Remove Backhoe from T ractor The only time the bac khoe may be operated from a position other than the operator seat is during backhoe a tt achme nt and removal. Opera- tor must: • Read Mounting Kit Manual instructions on att aching and removing backhoe and use extreme c are.
16 Installation MAN05 79 (1/19/20 07) STORAG E Connect Hydraulic Hoses TRACTOR: Discon nect hydr aulic ho ses from between bac khoe and tractor . BACKHOE: Co nnect hoses toge ther to prevent dirt from acc umulati ng in quic k coupl ers. -OR- Remo ve hydr aulic pum p from t he PT O shaf t if equipped.
Inst allation 17 MAN057 9 (1/19/ 2007) NOTES.
18 Part s MAN05 79 (1/19/2007 ) 1023000 4-POINT SUB-FRAME MOU NTING KIT W ARNING PINCH POINT Keep hands clear . 1006885 28 - P N 1006885 Serial Number Plate MODEL NO.
Part s 19 MAN057 9 (1/19/ 2007) 1023000 4-POIN T SUB-FRAME MOU NTING KIT P ART S LIST R E F P ART QTY DESCRIPTION 1 1 023004 1 Right tractor brac ket 2 1 023005 1 Lef t tractor bracke t 3 1 02300 6 1 .
20 Part s MAN05 79 (1/19/2007 ) 1024317 HOSE KIT R E F P ART QTY DESCRIPTION 1 1021003 † 1 Bulkhead adap ter mounting brac ket (ROPS tractor only ) 2 1021004 1 Hose, 45" x 3/4 JICF x 7/8 JICF 9.
Appendix 21 Bolt T orque & Size Chart s (Rev . 10 /10/2005) BOLT T OR QUE CHA R T Always tighten har dware to these v alues unless a different torque v alue or tighteni ng proce dure is li sted for a sp ecific applica tion. F ast eners must al wa ys be repla ced with t he same grade as spec ified in the manual par ts list.
22 Appendix Bolt T orque & Size Char ts (Rev . 10/10/2005) BOLT SIZE CHART NO TE: Char t shows bo lt thread sizes and correspo nding head (wrenc h) sizes for standard SAE and metri c bolts. ABBREVIATIONS A G ................... ............. .....
F-3079 (Rev . 1/16/2007) W oods Equipment Company 260 6 South Illinois Route 2 Post Office Box 1000 Oregon, Il linois 61061 800-319-663 7 tel 800-3 99-663 7 fax www .
F-8494 (Rev . 6/23/2005) W oods Equipm ent Company 260 6 South Illinois Route 2 Post Office Box 1000 Oregon, Illinoi s 610 61 800-319-663 7 tel 800 -399-66 3 7 f ax www .W oodsEquipme nt.com ©2007 Woods Equipment Company . All rights reserved. WOODS, the Woods logo, and "T est ed.
An important point after buying a device Woods Equipment 1023000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Woods Equipment 1023000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Woods Equipment 1023000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Woods Equipment 1023000 you will learn all the available features of the product, as well as information on its operation. The information that you get Woods Equipment 1023000 will certainly help you make a decision on the purchase.
If you already are a holder of Woods Equipment 1023000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Woods Equipment 1023000.
However, one of the most important roles played by the user manual is to help in solving problems with Woods Equipment 1023000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Woods Equipment 1023000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
