Instruction/ maintenance manual of the product WKED ML-126756 Wolf
Go to page of 16
FORM 31162 (Apr. 2000) ® OWNER’S MANUAL INST ALLA TION & OPERA TION WKE SERIES ELECTRIC CONVECTION OVENS MODELS WKE ML-126755 WKED ML-126756 WKEC ML-126757 WKEX ML-126758 WKEDX ML-126759 WKECX ML-126760 T HE W OLF R ANGE C OMP ANY LL C 19600 S.
– 2 – TABLE OF CONTENTS GENERAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
– 3 – Installation, Operation, and Care of WKE SERIES ELECTRIC CONVECTION OVENS SA VE THESE INSTRUCTIONS GENERAL The WKE Series Electric Convection Ovens feature a 500 ° F thermostat, timer, porcelain interior, and a two-speed, 1 ⁄ 2 HP blower motor as standard equipment.
– 4 – BA CK FR ONT PL-53274 LOCATION The installation location must allow adequate clearances for servicing and proper operation. INSTALLATION CODES AND STANDARDS In the United States, install the.
– 5 – ELECTRICAL CONNECTIONS WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT.
– 6 – ELECTRICAL CONNECTIONS (Stacked Ovens) WARNING: ELECTRICAL AND GROUNDING CONNECTIONS MUST COMPLY WITH THE APPLICABLE PORTIONS OF THE NATIONAL ELECTRICAL CODE AND/OR OTHER LOCAL ELECTRICAL CODES. WARNING: DISCONNECT ELECTRICAL POWER SUPPLY AND PLACE A TAG AT THE DISCONNECT SWITCH TO INDICATE THAT YOU ARE WORKING ON THE CIRCUIT.
– 7 – OPERA TION WARNING : THE OVEN AND ITS PARTS ARE HOT. USE CARE WHEN OPERATING, CLEANING, OR PERFORMING ANY MAINTENANCE. CONTROLS — MODELS WKE / WKEX / WKED / WKEDX Models WKE / WKEX Models WKED / WKEDX MOISTURE VENT DAMPER – Open the damper to exhaust excess moisture.
– 8 – USING MODELS WKE / WKEX / WKED / WKEDX Preheating 1. Turn Master Switch ON. Amber ON light will come on, indicating that power to oven is on. 2. Set Thermostat as desired. Refer to COOKING GUIDELINES for suggested temperatures and times for various products.
– 9 – CONTROLS — MODELS WKEC / WKECX Always displays [HR:Min] when setting the Time. Displays [HR:Min] if the countdown Time is more than 1 Hour. Displays [Min:Sec] if the countdown Time is less than 1 Hour. Displays Temperature in ° F. R & H MODE Indicates the oven is in the Roast and Hold Mode.
– 10 – MANUALLY SETTING THE TEMPERATURE AND COOK TIME To Set the Temperature • Press the SET button. Press the TEMPERATURE button; StPt displays to indicate Setpoint. • Use the Up and Down Arrow keys to increase or decrease the displayed Temperature value.
– 11 – Always Set the Temperature Before Setting the Time • Press the SET button. Press the TEMPERATURE button; StPt displays. Use the Up and Down Arrow keys to increase or decrease the Temperature. To save, press the SET button again. At startup, the display will initially show a GROWING BAR .
– 12 – ROAST AND HOLD OPERATION — Models WKEC and WKECX Roast and Hold cooks the product in two stages. During First Stage Cooking, the oven temperature is regulated by the Temperature setpoint and the Time setting. After the time counts down to 00:00, Second Stage Cooking begins.
– 13 – COOKING GUIDELINES The information in the Cooking Guidelines chart is suggested only. Cooking times for various products may be different depending on the brand, consistency and the chef’s preferences for taste and presentation. The times below may require adjustments.
– 14 – POWER OUTAGE In case of a power outage, the oven will automatically shut down. When power is restored to the lines, the oven will resume its normal operation. However, if the oven is to be left unattended during a power outage, push the master switch to the OFF position.
– 15 – IMPOR T ANT INFORMA TION When requesting information, Owner ’ s Guides, replacement parts or service, always refer to the model and serial number of your unit. The serial number of your appliance is located on the rating plate. For your convenience, space is provided below to record this information for future reference.
– 16 – THE WOLF RANGE COMP ANY LLC LIMITED COMMERCIAL EQUIPMENT W ARRANTY EFFECTIVE APRIL 1, 1995 The W olf Range Company LLC (Company) warrants to the original owner that the product is free from defect in material and workmanship.
An important point after buying a device Wolf WKED ML-126756 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wolf WKED ML-126756 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wolf WKED ML-126756 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wolf WKED ML-126756 you will learn all the available features of the product, as well as information on its operation. The information that you get Wolf WKED ML-126756 will certainly help you make a decision on the purchase.
If you already are a holder of Wolf WKED ML-126756, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wolf WKED ML-126756.
However, one of the most important roles played by the user manual is to help in solving problems with Wolf WKED ML-126756. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wolf WKED ML-126756 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
