Instruction/ maintenance manual of the product W302210I Wolf
Go to page of 24
I NST ALLA TION I NSTR UCTIONS P RO W ALL V ENTILA TION H OODS.
As you follow these instructions, you will notice W ARNING and CAUTION symbols. This blocked information is important for the safe and efficient installation of Wolf equip- ment. There are two types of potential hazards that may occur during installation.
3 INST ALLA TION REQUIREMENTS IMPORT ANT NOTE: This installation must be completed by a qualified installer or W olf authorized service center technician. Installer: Please read the entire Installation Instructions prior to installation. Save these instructions for the local inspector’ s refer- ence, then leave them with the homeowner .
4 W OLF PRO W ALL VENTILA TION HOODS IMPORT ANT NOTE: W olf recommends that the Pro wall ventilation hood be installed 30" (762) to 36" (914) above the countertop. Rail option (R) wall hoods come with a classic stainless steel decorative rail and stand-offs.
5 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS 10" (254) O VERALL HEIGHT O VERALL WIDTH 4" (102) 22" (559) O VERALL DEPTH 12".
6 W OLF PRO W ALL VENTILA TION HOODS 30" TO 36" (762 –914) TO COUNTER T OP 30" TO 36" (762 –914) TO COUNTER T OP 10" (254) 18" (457) HEIGHT OF HOOD 22" (559) 24&.
7 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS INST ALLA TION SPECIFICA TIONS The following chart provides dimensions specific to each wall hood model. These dimensions are critical for proper installation.
8 LO W -PROFILE AND 24" (610) HOODS STEP 1: INST ALL DUCTW ORK IMPORT ANT NOTE: W olf recommends that the Pro wall ventilation hood be installed 30" (762) to 36" (914) above the countertop. IMPORT ANT NOTE: Consult a qualified HV AC Engineer for specific ducting applications.
LO W -PROFILE AND 24" (610) HOODS Always install a roof or wall cap if you are not installing a remote blower . Connect 8" (203) round metal ductwork for low-profile hoods or 10" (254) round metal ductwork for 24" (610) deep hoods to the cap and work back towards the hood.
10 W OLF PRO W ALL VENTILA TION HOODS A CCESSORIES Optional acces- sories are available through your Wolf dealer . T o obtain local dealer information, visit the Locator section of our website, wolfappliance.
11 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS 17 " (432) 8" (203) W all Cut-Out Area Hood Centerline 4 1 /2 " (114) 4 11 /16 &q.
12 W OLF PRO W ALL VENTILA TION HOODS Rough-In Plate Mounting Holes Soffit Hood installation LO W -PROFILE AND 24" (610) HOODS STEP 5: INST ALL THE HOOD IMPORT ANT NOTE: If a backsplash is to be used, it should be installed before the wall hood is mounted.
13 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS 30" TO 36" (762 –914) COUNTERT OP TO BO TT OM OF VENTILA TION HOOD 18" (457) HE.
The hood assembly is shipped with the rough-in plate / transition attached. The transition is shipped upside down in the top of the hood. It must be removed and rein- stalled in the proper position. Remove the filters by pushing each filter up at the angle it is placed in, and rotate down.
15 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS Rough-In Plate Soffit Mounting Holes Hood installation 27" (686) DEEP W ALL HOODS If you ar.
Remove the electrical box cover from the rough-in plate. Connect black wire to power supply black wire, white wire to power supply white wire and green wire to green wire or bare wire. Place all wiring connections inside the elec- trical box and reinstall on the rough-in plate in the upper right-hand corner .
17 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS INTERNAL BLO WERS IMPORT ANT NOTE: Refer to the specific installation instructions provided with each internal blower for additional mounting and wiring instructions.
18 W OLF PRO W ALL VENTILA TION HOODS A CCESSORIES Optional acces- sories are available through your Wolf dealer . T o obtain local dealer information, visit the Locator section of our website, wolfappliance.
19 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS IN-LINE AND REMO TE BLO WERS BLO WER WIRING IMPORT ANT NOTE: Refer to the specific installation instructions provided with each blower for additional wiring instructions.
20 W OLF PRO W ALL VENTILA TION HOODS REMO TE BLOWERS BLOWER-60REM (801640) – 600 CFM remote blower for low-profile wall hoods (except Models W302210I and W362210I), and Models W302418 and W302718.
21 Dimensions in parentheses are in millimeters unless otherwise specified. INST ALLA TION INSTRUCTIONS A CCESSORIES Optional acces- sories are available through your Wolf dealer . T o obtain local dealer information, visit the Locator section of our website, wolfappliance.
22 CONT ACT INFORMA TION Wolf Customer Service: 800-332-9513 Website: wolfappliance.com TROUBLE SHOO TING IMPORT ANT NOTE: If the Pro wall ventilation hood does not operate properly , follow these troubleshooting steps: V erify that power is being supplied to the ventilation hood.
23 CUT -OUT FOR LOGO PLACEMENT BO TT OM EDGE OF HOOD FOLD LINE FOR LOGO PLACEMENT LEFT OUTER EDGE OF HOOD.
809340 7 / 2006 WOLF APPLIANCE COMP ANY , INC. P . O. BO X 44848 MADISON, WI 53744 800-332-9513 W OLF APPLIANCE.COM.
An important point after buying a device Wolf W302210I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wolf W302210I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wolf W302210I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wolf W302210I you will learn all the available features of the product, as well as information on its operation. The information that you get Wolf W302210I will certainly help you make a decision on the purchase.
If you already are a holder of Wolf W302210I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wolf W302210I.
However, one of the most important roles played by the user manual is to help in solving problems with Wolf W302210I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wolf W302210I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
