Instruction/ maintenance manual of the product WI-DM04 Winegard
Go to page of 11
R V DIGIT AL SA TELLITE SYSTEM with Digital Elevation Sensor FOR WINNEBAGO INDUSTRIES WI-DM04 - Single Coax Installation WI-DM54 - Dual Coax Installation U.S. P A TENT NO. 5,532,710 Made in U.S.A. Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000 319/754-0600 • F AX 319/754-0787 • www .
OPERA TION STEP 1. Step outside your vehicle and, using a compass, determine which direction is North. (Standing in or near vehicle can give you an incorrect reading.) The more accurately you determine North, the easier it will be to nd the satellite(s).
INST ALLA TION & ASSEMBL Y STEP 1. Choose a location on the roof for dish that will allow dish to raise and rotate without interfering with other roof-mounted equipment. Make sure inside ceiling plate is easily accessible, and with no obstructions that would interfere with operation.
DIGIT AL ELEV A TION SENSOR ROOF CONNECTIONS The illustrations below show the different methods of connecting wires at roof level. Method will depend on model. Wire colors MUST MA TCH, ie. red to red, green to green, black to black INSIDE RV FIGURE 8 This wire harness connects to the digital elevation sensor on the antenna.
FIGURE 10 to compensate for roof/ceiling slope, be sure to allow for this extra thickness. Y ou may add an extension to the directional handle for thicker roofs. Each extension will increase the length of the directional handle by 2-1/4". STEP 15.
ALIGN WITH BASEPLA TE AREA MARKED “FRONT” POINT T O FRONT OF VEHICLE Roof T emplate 1/8” DRILL BIT 8 HOLES. DO NOT DRILL THROUGH CEILING. 1-3/4” DIA.
300 310 320 330 340 350 50 20 30 40 POINT NORTH 290 10 60 70 240 250 1 Ceiling Plate 3 Directional Handle Extension 4 Directional Handle 2 (4) #10 Phillips Flat Head Screws FIGURE 13 5 ELEV A TING CRANK HANDLE (When installed, extends 2-1/4" from ceiling).
Pivot Shaft Part of Special Notes: When you have found the satellite signal, adjust the antenna up/down and right/left for the strongest signal your receiver displays. Due to variation in receivers and installation methods, you may nd the elevation numbers after peaking on strongest signal no longer match what the receiver display recommended.
NOT TO SCALE Ceiling Base Directional Dial (4) #10 Phillip Flat Head Screws Directional Handle Azimuth Lock Azimuth Lock Knob W asher #10 x 3/8" Red Phillips Screw #8-32 Square Nut Crank Handle B.
NOTES SPECIFICA TIONS ANTENNA & MOUNT Height when raised 30" verticle max. Height in the travel position 8" max. Operating radius 17" (34" diameter circle) Roof space required 26" LNB Compatible with DIRECTV ® , DISH ® , and Bell TV™ (northern U.
Printed in U.S.A. Winegard Company • 3000 Kirkwood Street • Burlington, Iowa 52601-2000 © Winegard Company , 2003, 2006 2451071 Rev5 12/12 WINEGARD MOBILE PRODUCTS LIMITED W ARRANTY (2 YEARS P AR.
An important point after buying a device Winegard WI-DM04 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Winegard WI-DM04 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Winegard WI-DM04 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Winegard WI-DM04 you will learn all the available features of the product, as well as information on its operation. The information that you get Winegard WI-DM04 will certainly help you make a decision on the purchase.
If you already are a holder of Winegard WI-DM04, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Winegard WI-DM04.
However, one of the most important roles played by the user manual is to help in solving problems with Winegard WI-DM04. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Winegard WI-DM04 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
