Instruction/ maintenance manual of the product SK-7002 Winegard
Go to page of 12
1 888 554 -S TA R C o m p a n y A SH AW ST A R C HOIC E TRAV’LER ® Automatic Multi-Satellite TV Antenna Model SK-7002 INSTALLATION MANUAL Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000 319/754-0600 • FAX 319/754-0787 • www.
Congratulations! Y ou have selected the Winegard ® TRA V’LER Automatic Multi-Satellite TV Antenna. The TRA V’LER antenna will deliver the ability to view both SHA W DIRECT satellites at the same .
Once you have checked for this: 1. Choose a location on the roof of the RV that will allow the dish to raise and rotate without interfer- ence from other roof mounted equipment. The TRA V’LER antenna may only be mounted parallel to the centerline of the coach.
NOTE: Anything in the striped area will interfere with the operation of the TRA V’LER antenna and may cause damage to the object or the TRA V’LER antenna.
Run a solid bead of sealant around the transition plate, making sure to cover each screw head. Be careful not to get any sealant above the lip of the transition plate. See diagram of transition plate. Cable Entry Plate Installation: Decide the best location for the cables to enter the vehicle.
Cable installation: Connect the control cable and power cable to the back of the TRA V’LER Interface box as shown below . Note: For cable runs longer than 25’ an extension may be purchased. Do not exceed 50’ of cable. Attach the TRA V’LER control cable to the TRA V’LER Interface Box, as shown in Figure 5A.
A. Press [ENTER] the TRA V’LER will return to the “Installation Menu” OR B. Press [POWER] the TRA V’LER will stow and turn “OFF” (Restart at Step 1). Refer to the SKA-722 Manual for instructions on how to install the Reector and Bracket.
W ARNING: Pay attention to these Pinch Points as the antenna raises! Usingthe(4)boltsandnutsprovided,attachthereectortothemountingbracket. Press [ POWER ] to lower the antenna to the travel position. Note: The nuts securing the dish should be tightened to 6-8 lb.
Appendix: Making the Right Connection with Hex Connectors Making a coaxial cable connection is critical. If you have the basic technique right you can modify it to your own personal taste. Whether you use a knife, stripping tool or diagonal cutter , the important thing is to make a good clean cut.
10 INSTALLATION ! DO NOT paint this antenna! Painting the TRAV’LER antenna will void your warranty. WINEGARD MOBILE PRODUCTS LIMITED W ARRANTY (2 YEARS P ARTS; 1 YEAR LABOR) Winegard Company warrants this product against defects in materials or workmanship for a period of two (2) years from the date of original purchase.
11 INSTALLATION.
Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000 319/754-0600 • FAX 319/754-0787 • www.winegard.com Printed in U.S.A. © Winegard Company 2008 2452159 Rev .
An important point after buying a device Winegard SK-7002 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Winegard SK-7002 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Winegard SK-7002 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Winegard SK-7002 you will learn all the available features of the product, as well as information on its operation. The information that you get Winegard SK-7002 will certainly help you make a decision on the purchase.
If you already are a holder of Winegard SK-7002, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Winegard SK-7002.
However, one of the most important roles played by the user manual is to help in solving problems with Winegard SK-7002. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Winegard SK-7002 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
