Instruction/ maintenance manual of the product RM-EX02 Winegard
Go to page of 11
® R V DIGIT AL SA TELLITE SYSTEM with Digital Elevation Sensor Model RM-EX02 Made in U.S.A. Winegard Company • 3000 Kirkwood St. • Burlington, IA 52601-2000 319/754-0600 • F AX 319/754-0787 • www .
T uning Antenna STEP 1 . Y our receiver should indicate it is receiving a signal. T o tune your antenna for the best signal strength. SLOWL Y move the antenna left, then right, until you have found the position that gives the highest signal strength. It is important to turn the antenna slowly .
4 5 Things you need — Screwdrivers (Phillips and slot) 1-3/4” hole saw 7/16” wrench ABS glue Drill with 1/8” bit T ape measure Non-hardening sealant (Check manufacturer ’s specications for compatibility with your roof material.) Winegard’ s Digital Elevation Sensor has been INST ALLED and CALIBRA TED at the factory STEP 1.
THREADED ROD, W ASHER AND NUT FIGURE 8 INSIDE RV Special instructions: For roof thickness greater than 6-1/2”. Parts Needed: (not included) RP-4400 14” worm gear for roof 3200369 Directional handle extension 2162031 Long threaded rod Instructions: STEP 8.
See template on reverse side. STEP 15. The directional handle and threaded rod will t roofs up to 5-1/4” thick. If you are using wedges to compensate for roof/cceiling slope, be sure to allow fo r this extra thickness. Y ou may add an extension to the directional handle for thicker roofs.
ALIGN WITH BASEPLA TE AREA MARKED “FRONT” POINT T O FRONT OF VEHICLE Roof T emplate 1/8” DRILL BIT 8 HOLES. DO NOT DRILL THROUGH CEILING. 1-3/4” DIA.
9 300 310 320 330 340 350 50 20 30 40 POINT NORTH 290 10 60 70 240 250 CAUTION! After INITIAL INST ALLA TION , the antenna SHOULD ROT A TE APPROXIMA TEL Y360°FROM TRA VEL POSITION. The pointer on the DIRECTIONAL HANDLE should point towards the RED SCREW ON THE ROT A TION CLAMP when in the TRA VEL POSITION.
10 11 FIGURE 17 Based on 5 minutes a day of usage, standard new alkaline batteries should last 88 days. STEP 19. See Figure 17. If using the SM-1000 surface mount box, feed cable through hole in box. STEP 20. Connect wires coming from sensor on roof to wall plate display in vehicle.
Parts List Feed Arm P .N. 2744946 46cmReector (4) Flat Head Bolts Back-up Frame Pivot Bracket Pin, 1/4 x 3.25” long (Not Shown: E-clip for 1/4” Pin T ravel Support LNBF LB-6000 Carriage Bolt (not shown) Flange Nut 1/4-20 Roller Hex Head Bolt 1/4-20 x 2.
14 15 Notes Notes.
ANTENNA & MOUNT Height when raised 30” vertical max. Height in the travel position 8” max. Operating radius 17” (34” diameter circle) Roof space required 26” LNB Compatible with DIRECTV ® , DISH ® , and Bell TV™ (northern U.S. and Canada) Weight 12 lbs Color Cool gray Antenna height 20.
An important point after buying a device Winegard RM-EX02 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Winegard RM-EX02 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Winegard RM-EX02 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Winegard RM-EX02 you will learn all the available features of the product, as well as information on its operation. The information that you get Winegard RM-EX02 will certainly help you make a decision on the purchase.
If you already are a holder of Winegard RM-EX02, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Winegard RM-EX02.
However, one of the most important roles played by the user manual is to help in solving problems with Winegard RM-EX02. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Winegard RM-EX02 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
