Instruction/ maintenance manual of the product RM-DM61 Winegard
Go to page of 11
1 R V Digital Satellite System with RS-1000 Antenna Model RM-4610, no Digital Magic TM Elevation Sensor Model RM-DM61 with Digital Magic TM Elevation Sensor Model RM-DM55 with Digital Magic TM (No Power Supply) OWNER’S MANUAL - OPERA TION/INST ALLA TION INSTRUCTIONS WINEG ARD ® Made in U.
2 3 TV Set #2 View RS-1000 TV Video Switch T o TV VCR Ant. Aux. Satellite Receiver Satellite antenna downlead T o Receiver RS-1000 downlead W all plate power supply TV/Ant. Sat TV TV TV VCR T o ‘TV In’ Satellite Receiver Satellite antenna downlead T o Receiver RS-1000 W all plate power supply TV/Ant.
4 5 TROUBLE SHOOTING NO PICTURE ON TV 1. Do you have a clear line of sight to the satellite? Are there trees, buildings, etc. in the way? Figure 3 illustrates the look angle of your reector . 2. Do you have the menu from the receiver? If not, check the channel the TV set is tuned for — it should be 3 or 4.
6 7 STEP 3. Remove backing from gasket. Attach adhesive side to base plate. IF YOU ARE USING THE ROOF WEDGE (R W-5000), use 3/16” gasket included with the mount UNDER the roof wedge. Install the 1/16” gasket included with RW -5000 BETWEEN the mount and roof wedge.
8 FOR RM-DM61/RM-DM55 ONL Y DIGIT AL ELEV A TION SENSOR ROOF CONNECTIONS The illustrations below show the different methods of connecting wires at roof level. Method will depend on model. Wire colors MUST MA TCH (i.e. red to red, green to green, black to black, white to white).
ALIGN WITH BASEPLA TE AREA MARKED “FRONT” POINT T O FRONT OF VEHICLE Roof T emplate 1/8” DRILL BIT 8 HOLES. DO NOT DRILL THROUGH CEILING. 1-3/4” DIA.
9 WITHOUT ROOF WEDGE Measure from top of roof to ceiling. TOP OF ROOF ➤ ➤ ➤ ➤ WITH ROOF WEDGE Measure from top of roof wedge to ceiling. TOP OF ROOF WEDGE CEILING CEILING See template on reverse side. STEP 19. The directional handle and threaded rod will t roofs up to 5-1/4” thick.
10 11 Rotation Clamp ASSEMBLED VIEW POINT TO BACK OF RV POINTER MUST POINT TO RED SCREW ON ROT A TION CLAMP WHEN IN TRA VEL POSITION CAUTION: After INITIAL INST ALLA TION, the antenna should ROT A TE FROM TRA VEL POSITION.
12 13 SPECIFICA TIONS Height when raised ......... 30” with satellite antenna in vertical position Height in travel position ......... 8” Operating radius ......... 35” (70” diameter circle) Roof space required ......... 19.5” x 46.75” LNBF .
14 15 REPLACEMENT P ARTS KITS HEAD ASSEMBL Y RP-RS00 Head w/bracket and nut ................. 1 Pins ................................................ 2 E-Clip ............................................. 2 REFLECTOR RP-REFL Dish......................
Printed in U.S.A. Winegard Company • 3000 Kirkwood Street • Burlington, Iowa 52601 © Winegard Company , 2003, 2005 2451070 Rev5 12/12 WINEGARD MOBILE PRODUCTS LIMITED W ARRANTY (2 YEARS P ARTS; 1.
An important point after buying a device Winegard RM-DM61 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Winegard RM-DM61 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Winegard RM-DM61 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Winegard RM-DM61 you will learn all the available features of the product, as well as information on its operation. The information that you get Winegard RM-DM61 will certainly help you make a decision on the purchase.
If you already are a holder of Winegard RM-DM61, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Winegard RM-DM61.
However, one of the most important roles played by the user manual is to help in solving problems with Winegard RM-DM61. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Winegard RM-DM61 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
