Instruction/ maintenance manual of the product WIRRX15-2 Williams Sound
Go to page of 16
MAN 119H WIR SYS 90ADV WIR SYS 91V SoundPlus ™ Infrared Listening System Inst alla tion Guide & User Manu al Model WIR TX90, T wo Channel System Model WIR SYS 90 ADV , T wo Channel System Model .
SoundPlus™ Infrared Listening System, Model WIR TX90, T wo-Channel Listening System Model WIR SYS 91V , T wo-Channel Listening System Model WIR SYS ADV , T wo-Channel Listening System Installation Guide & User Manual Contents System Overview ...
System Over view The WIR TX90 two channel infrared transmitter combines infrar ed modulator and emitter technology into a single mountable enclosure - r educing operating cost and eliminating precious rack space. The WIR TX90 features an easy to use conguration pr eset for Music, V oice, or Hearing Assistance Applications.
Determine Coverage Area Determine the coverage area needed for the seating ar ea. When using the WIR TX90 transmitter with the RX22-4 receiver , in single channel mode, the WIR TX90 can achieve a coverage area of 28,000 ft2 (2,600 m2).
CORRECT INCORRECT A230 Figure 4: NOTE: When pointing the emitter , be sure to keep the long dimension horizontal. A237 Figure 3: 3 Dimension Foot P attern WIR TX90 WIR TX9 WIR TX9 WIR TX9 A238 Figure .
Connect P o wer WARNING: POWERLINE VOL T AGE MUST NOT F ALL BELOW 90V , 0R SYSTEM PERFORMANCE WILL BE GREA TL Y REDUCED! Power Connection for U.S. Application Connect the TFP 010 power supply to the 3-pin Molex™ connector located on the rear of the TX90 (see Figur e 7).
Connect Audio Source Determine the length of the audio cable needed to connect to the sound system to the WIR TX90 transmitter . Install the supplied Phoenix connector on the end of the audio cable to be connected to the transmitter . See the back of the WIR TX90 for wiring instructions.
Select the Audio Processing A pplication Preset The WIR TX90 offers thr ee preset audio processing options for the most common applications: Music, V oice, and Hearing Assist. Use the “Music” setting when maximum dynamic range and audio quality are pr eferred.
Using the Optional WIR TX9 Slave Emitter for Additional Coverage For larger facilities, additional emitter panels can be used to increase the overall coverage ar ea. In these cases, we recommend using the WIR TX9 slave emitter in tandem with the WIR TX90.
Receiver Safety Information HEARING SAFETY CAUTION! Williams Sound receivers are designed to amplify sounds to a high volume level which could potentially cause hearing damage if used improperly . T o protect your hearing and the hearing of others: 1.
BA TTER Y (BA T AP07D) A235 VOLUME CONTROL Figure 14: WIR RX18 Under-the-chin Receiver Optional Infrared Receivers OFF ON/OFF VOLUME SWITCH A162 EARPHONE JACK "ON" INDICA TOR CHANNEL SELECTOR Channel Frequency 1 2.3 MHz 2 2.8 MHz 3 3.3 MHz 4 3.
Optional Chargers TFP 043 AC POWER CONNECTION CHG 518 REAR VIEW A223 WIR RX18 RECEIVER CHARGING INDICATORS CHG 518 FRONT-T OP VIEW Figure 15: Multiple Battery Charger , Model CHG 518 CHG 518 Back RECE.
T rouble Shooting The WIR TX90 “Power On” indicator is not lit. • Make sure the transformer is plugged into the transmitter and any r emote power switch is on. • Make sure the electrical outlet is on. • Make sure the 24 V AC power supply is working.
Limited W arranty Williams Sound products are engineer ed, designed, and manufactured under carefully contr olled conditions to provide you with many years of reliable service. Williams Sound warrants the Sound Plus™ Infrared Listening System against defects in materials and workmanship for FIVE (5) years.
Dimensions, Weight: 11.25” W x 6.25” H x 2.125” D (28.6 cm x 15.9 cm x 5.4 cm), 1.8 lbs (0.8 kg) Color: Black with white legends, black acrylic lens (available in white) Power Supply: Wall T ran.
©2012 Williams Sound • All Rights Reserved 10300 V alley View Rd • Eden Prairie, MN 55344 800-328-6190 / 952-943-2252 • F AX: 952-943-2174 www .
An important point after buying a device Williams Sound WIRRX15-2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Williams Sound WIRRX15-2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Williams Sound WIRRX15-2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Williams Sound WIRRX15-2 you will learn all the available features of the product, as well as information on its operation. The information that you get Williams Sound WIRRX15-2 will certainly help you make a decision on the purchase.
If you already are a holder of Williams Sound WIRRX15-2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Williams Sound WIRRX15-2.
However, one of the most important roles played by the user manual is to help in solving problems with Williams Sound WIRRX15-2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Williams Sound WIRRX15-2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
