Instruction/ maintenance manual of the product model wir 240/250 Williams Sound
Go to page of 20
Manual and User Guide Model WIR 240 Model WIR 250 T ransmitter Model WIR 240 Receiver Model WIR RX240 or Receiver Model WIR RX250 TV T alker Infrar ed System MAN 147E ©2011 Williams Sound.
2 Contents System Overview .................................................................................. 3 System Components ............................................................................ 3 Safety Information .......................
3 System Over view Thank you for purchasing the TV T alker Infrared System from Williams Sound. Anyone needing auditory assistance to overcome background noise, r everberation, or distance from the sound sour ce can benet from the TV T alker Infrared System.
4 Safety Information HEARING SAFETY : CAUTION! This product is designed to amplify sounds to a high volume level which could potentially cause hearing damage if used improperly .
5 P ACEMAKER SAFETY : CAUTION! 1. Before using this pr oduct with a pacemaker or other medical device, consult your physician or the manufacturer of your pacemaker or other medical device.
6 Setting up the TX240 T ransmitter NOTICE: THE RECHARGEABLE BA TTERIES ARE SHIPPED IN A DIS- CHARGED ST A TE. THE BA TTERIES MUST BE CHARGED OVERNIGHT BEFORE USING THE TV T ALKER INFRARED SYSTEM. The WIR TX240 T ransmitter may be placed on top of a TV or shelf.
7 Step 1: Connect the T ransmitter Power Supply Plug the Power Supply cord into the “DC 12V” jack on the back of the TX240. Then plug the Power Supply into an AC outlet. When the receiver is placed into the charging cradle built into the top of the transmitter , the center charging indicator on the front of the TX240 will turn on.
8 Step 2: (continued) NOTE: Some televisions have FIXED output and others have V ARIABLE output. If available, FIXED output should be selected. Consult your television manual for more information. “Fixed” output means the volume on the television will not change when the volume is increased, decr eased, or muted.
9 2.3 MHz (MONO) OPERA TION: Connect the LEFT RCA plug from the TV or VCR audio output into the LEFT RCA jack on the TX240 T ransmitter ❸ (the right jack should be left unplugged). Next, slide the stereo/ mono switch to the “O” mono position ➋ .
10 Setting up the RX240 Receiver Step 1: Install the Receiver Batteries Insert the rechargeable battery into the bottom of the RX240 Receiver (see page 11). Place the receiver into the charger cradle built into the top of the TX240 T ransmitter and let charge overnight.
11 RX240 RECEIVER BA TTERY (BA T AP07D) VOLUME CONTROL RX240 RECEIVER (BACK VIEW) BALANCE CONTROL.
12 Setting up the RX250 (Neckloop) Receiver Step 1: Install the Receiver Batteries Insert the Rechargeable battery into the bottom of the RX250 Receiver (see drawing on page 13). Place the receiver into the charger cradle built into the top of the TX240 T ransmitter and let charge overnight.
13 RX250 RECEIVER NECKLOOP BA TTERY (BA T AP07D) VOLUME CONTROL STEREO HEADPHONE JACK ON/OFF SWITCH RX250 RECEIVER (BACK VIEW) BALANCE CONTROL.
14 In Case of Difculty If the system does not seem to be functioning: 1. Read through the manual and user guide car efully to verify proper setup and installation of your system. 2. Make sure that your television or VCR is plugged in and turned on.
15 Limited Warranty Williams Sound products are engineer ed, designed and manufactured under carefully contr olled conditions to provide you with many years of reliable service. Williams Sound warrants the TV T ALKER Infrared System against defects in materials and workmanship for TWO (2) years.
16 If you experience difculty with your system, call T oll-Fr ee for Customer Assistance: 1-800-843-3544 If it is necessary to return the system for service, your Customer Service Representative will give you a Return Authorization Number (RA) and shipping instructions.
17 WIR 240, WIR 250 System Specications: WIR TX240 T ransmitter: Size, Weight, Color: 6.25"L x 4"W x 1.4"H (15.9cm x 10.2cm x 3.6cm), 170g, Gray Power Input: 12VDC (center is positive), 200 mA Class II wall transfomer TFP 042 Power Supply: North America: 120V AC, 60Hz, UL/CSA Subcarrier Frequency: 2.
18 WIR RX240 Receiver: Weight: 55 g Material and Color: ABS plastic, Black Battery T ype, Life: BAT AP07D NiMH Battery Pack, 7 hours Modulation Frequency: 2.
.
©2011 Williams Sound MAN 147E.
An important point after buying a device Williams Sound model wir 240/250 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Williams Sound model wir 240/250 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Williams Sound model wir 240/250 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Williams Sound model wir 240/250 you will learn all the available features of the product, as well as information on its operation. The information that you get Williams Sound model wir 240/250 will certainly help you make a decision on the purchase.
If you already are a holder of Williams Sound model wir 240/250, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Williams Sound model wir 240/250.
However, one of the most important roles played by the user manual is to help in solving problems with Williams Sound model wir 240/250. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Williams Sound model wir 240/250 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
