Instruction/ maintenance manual of the product ES100 White-Westinghouse
Go to page of 16
R ange Welcome .......................................... 2 Important Safety Instructions ..... 2-4 Before Setting Oven Controls .... 4-5 Oven Control Functions ................ 5 Setting Surface Controls ............... 6 Setting Oven Controls ......
2 Read all instructions before using this appliance. Save these instructions for future reference. This manual contains important safety symbols and instructions. Please pay attention to these symbols and follow all instructions given. This symbol will help alert you to situations that may cause serious bodily harm, death or property damage.
3 Stepping, leaning or sitting on the doors or drawers of this range can result in serious injuries and also cause damage to the range. Do not allow children to climb or play around the range. The weight of a child on an open door may cause the range to tip, resulting in serious burns or other injury.
4 Arranging Oven Racks ALWAYS ARRANGE OVEN RACKS WHEN THE OVEN IS COOL (PRIOR TO OPERATING THE OVEN). Always use oven mitts when using the oven. Removing & Replacing Oven Racks To remove , pull the rack forward until it stops. Lift up front of rack and slide out.
5 Before Setting Oven Controls T o Set the Clock When the range is first plugged in, or when the power supply to the range has been interrupted, the display will flash "12:00". 1. Press . 2. Within 5 seconds, press and hold the or until the correct time of day appears in the display.
6 Setting Surface Controls Fig. 1 1. Place correctly sized cookware on the radiant surface element. 2. Push in & turn the surface control knob in either direction to the desired setting (See Fig.1). Start most cooking operations on a higher setting & then turn to a lower setting to finish cooking.
7 Setting Oven Controls The broiler pan & the insert (some models) allows grease to drain and be kept away from the high heat of the broiler. DO NOT use the pan without the insert. DO NOT cover the insert with foil; the exposed grease could ignite.
8 Your new oven has been factory calibrated and tested to ensure an accurate baking temperature. For the first few uses, follow your recipe times and temperature recommendations carefully. If you feel your oven is too hot or too cool from your baking experience, the oven temperature may be adjusted to your liking.
9 Oven Racks Oven Door Remove racks. See "Removing & Replacing Oven Racks" under Before Setting Oven Controls . Use a mild, abrasive cleaner, following the cleaner ’ s recommendations.
10 Ceramic Glass Cooktop Cleaning & Maintenance DO NOT use a cooktop cleaner on a hot cooktop. The fumes can be hazardous to your health, and can chemically damage the ceramic-glass surface. Before cleaning the cooktop, be sure the controls are turned to OFF and the cooktop is COOL.
11 Changing the Interior Oven Light (some models) On some models, the oven light automatically turns on when the door is opened. Some models have a switch located on the control panel to turn on the light. The oven light is located at the rear of the oven.
12 Fig. 3 Removing & Replacing the Oven Door The door is heavy. For safe, temporary storage, lay the door flat with the inside of the door facing down. To Remove Oven Door: 1. Open oven door completely (horizontal with floor - See Fig. 1). 2. Remove 2 screws located on the inside of the oven door liner (See A Fig.
13 Metal marks (Ceramic Cooktop models) - Sliding or scraping of metal utensils on cooktop surface. Do not slide metal utensils on cooktop surface. Use a ceramic-glass cooktop cleaning creme to remove the marks. See "Cooktop Cleaning and Maintenance" in the Care & Cleaning section.
14 Notes.
15 Notes.
Y our appliance is covered by a limited 90 day warranty . For the first 90 days from your original date of purchase, Electrolux will pay all costs for repairing or replacing any parts of this applianc.
An important point after buying a device White-Westinghouse ES100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought White-Westinghouse ES100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data White-Westinghouse ES100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, White-Westinghouse ES100 you will learn all the available features of the product, as well as information on its operation. The information that you get White-Westinghouse ES100 will certainly help you make a decision on the purchase.
If you already are a holder of White-Westinghouse ES100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime White-Westinghouse ES100.
However, one of the most important roles played by the user manual is to help in solving problems with White-Westinghouse ES100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device White-Westinghouse ES100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
