Instruction/ maintenance manual of the product P200 White Rodgers
Go to page of 14
P200 Programmable Thermostat Installation Instructions & User Guide Congratulations on the purchase of your White-Rodgers ™ thermostat! Save these instructions for future use! Questions? Contact White-Rodgers ™ customer service at 1-877-654-9394 For Installation Help 1- 877-654-9394 White-Rodgers.
1 1 1 A TTENTION: MERCUR Y NO TICE This product does not contain mercury . However , this product may replace a product that contains mercur y . Mercury and products containing mercury must not be discarded in household trash. Do not touch any spilled mercury.
2 3 A B C P art 1 Before Getting Started 1.1 Check package contents Open the package and verify that the follo wing items are included: • Thermostat wallplate (A) and cover (B) • 2 mounting screws.
4 5 C AUX G E L Y W RC R P art 2 Remove Old Thermostat and Install New Thermostat Do not disconnect wires from the old thermostat until you label all the wires according to this manual. 2.1.1 After turning off power to your heating & cooling system, expose wallplate with wires and wire terminals.
6 7 ✔ Ignore wire colors. There is no standard color code for thermostat wires. ✔ Ignore existing wire labels, if they are present. ✔ Use the pro vided labels to label/re-label the thermostat wires. ✔ The new labels must remain on the wires a t least until the installation process is complete.
8 9 If the OLD thermostat’ s terminal is wired into the wall and identifi ed by this letter… …Then label its wire with this letter: Y ou’ll need this informa tion further in the installation process! 2.2.2 Label each wire that comes out of the wall and attaches to terminals on the old thermostat.
10 11 B GAS ELEC CGOY W RH B RC 2.3.1 Detach the new thermostat’ s wallplate from the rest of the thermostat and position the wallplate on the wall according to the illustration below, passing the labeled wires through the wire hole in the center of the wallplate.
12 13 1. Open the thermostat cover door . 2. Set the FA N switch to AUTO . 3. Set the SYSTEM switch to COOL (to turn on cooling) or HEA T (to turn on heating).
14 15 Press the PRGM and RUN buttons simultaneously . Y ou will be prompted to ans wer 8 “Options” questions, shown below. As each option is presented: ✔ Use the buttons to answer each question. ✔ Use HOLD button to advance to the next question and the TIME button to return to the previous question.
16 17 3.4 T urn on power to y our heating and cooling system 1. Press the TIME button. The display will show the hour . – Using the buttons adjust the hour . 2. Press the TIME button. The display will show minutes . – Using the buttons adjust the minutes.
18 19 Y ou can change the day , time period or tempera ture settings of the pre-programmed schedule. 1. Set the SY STEM switch to COOL (to program the cooling schedule), or to HEA T (to program the heating schedule).
20 21 Y ou can manually override the currently-programmed tempera ture indefi nitely . 1. Use the buttons to raise or lower the desired temperature. 2. When the desired tempera ture is displayed, press the HOLD button. “HOLD” will be displayed at the bottom of the screen.
22 23 When the thermostat displays OR you need to replace batteries with 2 new AA alkaline batteries. Default setting – no temperature adjustment 4.5 Change batteries Y our thermosta t was accurately calibrated a t the factory .
24 25 Problem Possible Cause Action Snowfl ake 5-minute lockout No action needed: should icon blinking enabled to protect stop blinking after compressor 5 minutes No Heat, No Cool, Blown fuse / Repla.
An important point after buying a device White Rodgers P200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought White Rodgers P200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data White Rodgers P200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, White Rodgers P200 you will learn all the available features of the product, as well as information on its operation. The information that you get White Rodgers P200 will certainly help you make a decision on the purchase.
If you already are a holder of White Rodgers P200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime White Rodgers P200.
However, one of the most important roles played by the user manual is to help in solving problems with White Rodgers P200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device White Rodgers P200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
