Instruction/ maintenance manual of the product XTR-695 Whistler
Go to page of 9
OWNER’S MANUAL The Whistler Group Corporate Headquarters 13016 N. W alton Blvd. • Bentonville, AR 72712 T el 479.273.6012 • Fax 479.273.2927 Customer Retur n Center 551 N. 13th St. • Rogers, AR 72756 Customer Service T el 800.531.0004 www . whistlergroup .
Model Features Summary ................................. 3 - 4 Installation ........................................................ 5 - 6 • M ounting Guidelines 5 • W indshield Mounting 6 • Power Connection and Fuse Replacement 6 Operation ....
Mounting Guidelines • Mount the unit as low as possible near the center of the windshield. • Do not mount the unit behind wipers, ornaments, mirrored sunscr eens, etc. These obstr uctions have metal surfaces which can affect radar and laser signals and reduce critical warning time.
Audio Level Adjustment The audio levels can be adjusted high to low or low to high. • Move Power/V olume button back to increase audio level. • Move Power/V olume button forward to decr ease audio level. As audio level is adjusted, beeps are provided and the display indicates volume level.
V ehicle Battery Saver Mode The V ehicle Battery Saver Mode automatically shuts off your detector after 3 hours by default. The timer is reset if the detector is turned off, unplugged or any button is pressed before the timer has expir ed. The detector will alert you with an audible and visu- al warning before it shuts off.
OPERA TION Alert Priority When two or more signals are r eceived at the same time, the alert priority is: 1 . Laser 2. Speed Radar 3 . Safety Radar Example: If X band is alerting, then suddenly a laser signal is detected, the laser warning will override the X band alert.
POP ™ Mode Alerts Because POP ™ Mode radar utilizes the same K or Ka band frequencies, POP ™ Mode Alerts will be displayed as regular radar alerts. LASER/RADAR ALERTS Speed Radar Audio/Visual Alerts When X, K or Ka is detected, the band ID and signal strength are displayed.
POP™ Mode POP ™ Mode is a feature on some newer radar guns operating on K and Ka bands. When the gun is in POP ™ Mode and activated, a brief burst of energy , less that 1/15 of a second, is transmitted and the veh icle’ s speed is quickly acquired.
Service Under W arranty During the warranty period, defective units will be r epa ir ed without charge to the purchaser when re turn ed with a dated store r eceipt to the address bel ow . Uni ts returned without a dated store receipt will be handled as described in section “Service Out Of W arr ant y .
An important point after buying a device Whistler XTR-695 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whistler XTR-695 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whistler XTR-695 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whistler XTR-695 you will learn all the available features of the product, as well as information on its operation. The information that you get Whistler XTR-695 will certainly help you make a decision on the purchase.
If you already are a holder of Whistler XTR-695, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whistler XTR-695.
However, one of the most important roles played by the user manual is to help in solving problems with Whistler XTR-695. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whistler XTR-695 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
