Instruction/ maintenance manual of the product MIX 6 Whirlwind
Go to page of 6
U. S. Audio whirlwind OPERATIONS MANUAL Mix 6 STEREO MIXER UNPACKING INTRODUCTION US Audio has made e'erv effort to ensure that your equipment is received Thank you for selecting the US Audio Mix 6. The Mix 6 delivers the ultimate in the same perfect condition it was in when it left the factory.
THEORY OF OPERATION The US Audio Mix 6 has four mic or line input channels and two stereo aux line inputs. All of the XLR and 1/4” input and output jacks, except aux 1, are active electronically balanced circuits.
the “in” position and lifts the signal when “out”. Signal to the headphone switch is CONTROLS AND CONNECTIONS always on. 1. Channel Volume Pots contr ol input signals over a range of 7. Master Volume Pots determine the amount of signal from the summing amps that is fed to the output drivers and the meters.
12. Input 1/4 TRS and XLR Jacks are AC coupled through phantom blocking capacitors with pin 2 being positive wired to tip, pin 3 being negative wired to ring and pin 1 being common wired to 19. Phantom Power Switch activates 48V DC on channel 1-4 XLR sleeve.
INPUT LEVEL INPUT MIC/LINE SWITCH GAIN HEADROOM MAX OUT SIGNAL TO NOISE RATIO RESIDUAL NOISE 10 Line 0 12 101 -91 0 Line 0 22 91 -91 0 Line 10 12 92 -82 -10 Line 20 12 82 -72 -10 Line 30 2 82 -62 -20 .
SPECIFICA TIONS Frequency Response LED Clip Threshold +19dBm unbalanced Line mode ± 3dB, 6Hz to 40kHz +25dBm balanced -0.4dB @ 20Hz -.8dB @ 20kHz THD+N (Total Harmonic Distortion + Noise) Mic mode ± 3dB, 18Hz to 36kHz .
An important point after buying a device Whirlwind MIX 6 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlwind MIX 6 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlwind MIX 6 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlwind MIX 6 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlwind MIX 6 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlwind MIX 6, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlwind MIX 6.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlwind MIX 6. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlwind MIX 6 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
