Instruction/ maintenance manual of the product WWDC 9200 Whirlpool
Go to page of 17
.
EN 1 INTENDED USE This washing machine is exclusively destined to treat machine washable laundry in quantities which are usual for private households. • Observe the instructions given in these Instructions for Use, the Installation Guide and the Programme Chart when using the washing machine.
EN 2 2. Packaging • The packaging material is entirely recyclable, and marked with the recycling symbol . Adhere to current local regulations when disposing of packaging material. 3. Disposing of packaging and scrapping old washing machines • The washing machine is built from reusable materials.
EN 3 BEFORE USING THE WASHING MACHINE 1. Removing the packaging and inspection • After unpacking, make sure that the washing machine is undamaged. If in doubt, do not use the washing machine. Contact After-Sales Service or your local retailer. • Keep the packaging materials (plastic bags, polystyrene parts, etc.
EN 4 DESCRIPTION OF THE WASHING MACHINE DOOR BEFORE THE FIRST WASH CYCLE 1. Worktop 2. Control panel 3. Detergent dispenser 4. Service plate (inside the door) 5. Door 6. Pump access with filter and emergency drain hose (if available) behind the plinth 7.
EN 5 PREPARATION OF THE WASHING 1. Sort the laundry according to... • Type of fabric / care label symbol Cottons, mixed fibres, easy care/synthetics, wool, handwash items. • Colour Separate coloured and white items. Wash new coloured articles separately.
EN 6 Please note: Too much detergent can result in excess foam formation, which reduces washing efficiency. If the washing machine detects too much foam, it may prevent spinning, or prolong the programme duration and increase the water consumption (see also remarks on foam formation in the “Troubleshooting Guide”).
EN 7 Using chlorine bleach • Wash your laundry in the desired programme (Cotton, Synthetics), adding an appropriate amount of chlorine bleach to the SOFTENER chamber (close the detergent dispenser carefully).
EN 8 DRAINING RESIDUAL WATER/ CLEANING THE FILTER We recommend that you check and clean the filter regularly, at least two or three times a year, especially : • If the “Clean pump” indication lights up. • If the appliance is not draining properly or if it fails to perform spin cycles.
EN 9 CARE AND MAINTENANCE Appliance exterior and control panel • Wash down with a soft, damp cloth. Dry with a soft cloth. Appliance interior • After each washing, leave the door open for some time to allow the inside of the appliance to dry.
EN 10 TROUBLESHOOTING GUIDE Your washing machine is equipped with various automatic safety functions. These enable faults to be detected in good time and the safety system can react appropriately. These faults are frequently so minor that they can be removed within a few minutes.
EN 11 Description of failure indicators The washing machine is at a standstill for several minutes in the middle of a running programme; the wash programme seems not to proceed Normal function of the washing machine used for optimizing the rinse phase.
EN 12 If any of the faults described above persist, unplug the appliance, turn off the water tap and contact our After-Sales Service (see next chapter).
EN 13 REMAINING MOISTURE CONTENT OF THE LAUNDRY AFTER SPINNING The degree of moisture remaining in the laundry after spinning mainly depends on the fabric type, the selected programme and spin speed. The lowest remaining moisture content can be achieved using the wash programme referred to by the Energy Label, with maximum spin speed.
EN 14 AFTER-SALES SERVICE Before contacting After-Sales Service: 1. Try to remedy the problem yourself (see “Troubleshooting Guide”). 2. Restart the programme to check whether the problem has solved itself. 3. If the washing machine continues to function incorrectly, call our After-Sales Service.
EN 15 ELECTRICAL CONNECTION Manufacturer: Whirlpool Europe s.r.l. Viale Guido Borghi 27 21025 Comerio (VA) Italy For Great Britain only Warning - this appliance must be earthed Fuse replacement If the mains lead of this appliance is fitted with a BS 1363A 13amp fused plug, to change a fuse in this type of plug use an A.
5019 300 00591 Whirlpool® Registered tr ademark/TM T rademark of W hirlpool group of c ompanies © Copyright Whirlpool Europe s.r .l. 2012. All rights reserved - http://www.
An important point after buying a device Whirlpool WWDC 9200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool WWDC 9200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool WWDC 9200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool WWDC 9200 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool WWDC 9200 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool WWDC 9200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool WWDC 9200.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool WWDC 9200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool WWDC 9200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
