Instruction/ maintenance manual of the product W10038070 Whirlpool
Go to page of 16
W ASHER INSTALLATION INSTRUCTIONS ............................................. 1 ....................................... 2 ................................................. 2 ....................................................... 2 .................
2 ■ ˚ ˚ ■ ■ ■ ■ ˚ ˚ ■ 1 ⁹⁄₁₆ " ■ ■ ■ ⁹⁄₁₆ ■ ■ ■ A B C D EF G H A B.
3 ■ ■ ■ ■ ■ ■ ■ ■ ■ A B C 48.3 cm (19") 0 cm (0") 0 cm (0") 68.6 cm (27") 2.5 cm (1") 64.8 cm (25 ¹⁄₂ ") 10.2 cm (4") 35.6 cm (14" max.) 7.6 cm (3") 7.6 cm (3") 155 cm (24 in. ) 2 2 310 cm (48 in.
4 ■ ■ ■ A B.
5 . ■ ■ ■ ■ A.
6 ■ ■ ■ ■ AB A B.
7 . C B A A 10.2 cm (4") 2.5 cm (1") A 10.2 cm (4").
8.
9 W ASHER SAFETY You can be killed or seriously injured if you don't immediately You can be killed or seriously injured if you don't follow All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can happen if the instructions are not followed.
10 INST ALLA TION REQUIREMENTS T ools and P arts Gather the requir ed tools and parts before starting installation. The parts supplied are in the washer basket.
11 Recessed area or closet installation The dimensions shown are for the r ecommended spacing allowed (A and B), except the closet door ventilation openings. The dimensions shown for the closet door ventilation openings (C) are the minimum r equired. ■ Additional spacing should be considered for ease of installation and servicing.
12 ■ Do not earth to a gas pipe. ■ Check with a qualified electrician if you are not sur e the washer is properly earthed. ■ Do not have a fuse in the neutral or earth circuit. INSTALLATION INSTRUCTIONS Before Y ou Start NOTE: T o avoid floor damage, set the washer onto cardboard before moving acr oss floor .
13 4. T o remove the power cord fr om the cord restraint, push the power cord in, pr ess T AB, and then pull the power cord out. Looped power cord 1. Firmly grasp the yellow shipping strap and pull until both ends are completely r emoved from washer .
14 Floor drain Do not install the drain hose form on to the corrugated drain hose. Y ou may need additional parts. See Floor drain under “T ools and Parts.” Connect the Inlet Hoses The washer must be connected to the water faucets using the new inlet hoses.
15 Secure the Drain Hose 1. Remove the shipping strap from the power cor d. Drape the power cord over the console. 2. Remove any cardboar d used to move washer . 3. Wrap the drain hose to the laundry tub leg or drain standpipe with the beaded tie strap.
4. If the washer is not level, move the washer out slightly , tip back, prop up the fr ont of the washer with the wood block and adjust the feet up or down as necessary by twisting the feet. T urn the feet clockwise to raise the washer or counterclockwise to lower the washer .
An important point after buying a device Whirlpool W10038070 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool W10038070 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool W10038070 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool W10038070 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool W10038070 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool W10038070, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool W10038070.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool W10038070. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool W10038070 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
