Instruction/ maintenance manual of the product System I Whirlpool
Go to page of 14
m 1 InstructionS WHIRLPOOL UNDERCOUNTER WATER FILTRATION SYSTEMS I, II, & Ill.
Remove parts from packages. Check that you have all the parts. filtration assembly System I (A) filtration assembly System II (B) filtration assembly System III (C) filtration assembly cover (D) 2 mou.
Before You Start . . . IMPORTANT: Read and save these instructions. If you need assistance.. . It is recommended that this system be installed by a licensed plumber.
Instructions At A Glance l For detailed instructions see following page. 1. Turn off cold water supply. (St; la-lb) Electrical Shock Hazard Special care must be taken when drilling into water pipes.
Product Damage DO NOT connect to a hot water supply line. Failure to follow this instruction could result in product damage. la Take note of water requirements listed under . the Use & Care section of this booklet. The filtration system’s feed line (orange tubing) connects to your cold water supply line using the saddle valve.
Instructions At A Glance l For detailed instructions see following page. 1. Decide if the system will be connected to your refrrgerator, to an optional faucet or to both. (Step 2a) 3. Or, insta!l faucet in sink and connect blue tubing to filtration assembly.
2a You have three installation options: . 1 .Connect water supply from filtration system to refrigerator’s ice and water only. 2.Connect water supply from filtration system to optional sink faucet only. 3.Connect water supply from filtration system to both refrigerator and optional sink faucet.
Start Up Instructions At A Glance l For detailed instructions see following page. i . I 1. Slide filtration assembly onto mounting screws. (Steps 3a-3c) 2. Turn on cold water supply. (Step 3d) 3. If filtration assembly was connected to refrigerator, make and discard 2 batches of ice and drain 2-3 gallons of water from water dispenser.
Start Up Electrical Shock Hazard Special care must be taken when drilling into walls. Electrical wires may be concealed behind the wall covering: - Use only an electric drill with a 3-wire power supply cord connected to a grounded receptacle.
Water Requirements The filtration system must be connected to a cold water supply line providing 30-l 00 psi water pressure. The water temperature must be between 40”-100°F.
Call l-800-253-1301 to order. Replacement Parts & Accessories System I Replacement Cartridge Kit Kit includes Sediment/Carbon (SC) Cartridge 4373529 System II Replacement Cartridges Kii Kit includes Lead Reduction (L) and Carbon Filter (CF) Cartridges.
Performance Data Sheet 0 NSF This product has been tested and listed by NSF International under B Standard 42 for Taste, Odor and Chlorine reduction (Class I) and This product has been tested and listed by NSF International under Standard 42 Particulate reduction (Class II).
Performance Data Sheet This product has been tested and listed by NSF International under Standard 42 for Taste, Odor and Chlorine reduction (Class I) and Particulate reduction (Class II) and under Standard 53 for Cyst, Turbidity, Lead and VOC reduction.
Part No. 4373576 01993 Whirlpool Corporation - Whirlpool Corporation Benton Harbor. Ml 49022 CB Printed on Recycled Paper in U.S.A..
An important point after buying a device Whirlpool System I (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool System I yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool System I - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool System I you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool System I will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool System I, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool System I.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool System I. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool System I along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
