Instruction/ maintenance manual of the product SF325PEG Whirlpool
Go to page of 30
TO THE INST ALLER: PLEASE LEA VE THIS INSTRUCTION BOOK WITH THE UNIT . TO THE CONSUMER: PLEASE READ AND KEEP THIS BOOK FOR FUTURE REFERENCE. 4.65 Cubic Foot Oven MODEL SF325PEG 8053373A with ACCUBAKE ® System A Note to Y ou ............2 Range Safety .
2 A N OTE TO Y OU Thank you for buying a WHIRLPOOL ® appliance. The Whirlpool Brand is committed to designing quality products that consistently perform for you to make your life easier . T o ensure that you enjoy years of trouble-free operation, we developed this Use and Care Guide.
3 R ANGE S AFETY continued on next page Y ou will be killed or seriously injured if you don’t follow instructions. Y ou can be killed or seriously injured if you don’t follow instructions. Y our safety and the safety of others is very important. We have provided many important safety messages in this manual and on your appliance.
4 RANGE SAFETY SA VE THESE INSTRUCTIONS W ARNING: T o reduce the risk of fire, electrical shock, injury to persons, or damage when using the range, follow basic precautions, including the following: • W ARNING : TO REDUCE THE RISK OF TIPPING OF THE RANGE, THE RANGE MUST BE SECURED BY PROPERL Y INST ALLED ANTI-TIP DEVICES.
5 Electronic oven control (p. 10-18) Control panel (pp. 5, 19) Automatic oven light switch (p. 25) Oven vent (p. 18) Surface burners and grates (pp.6-7, 19, 21-22) Anti-tip bracket (p. 3) Door stop clip (pp. 22-24) Model and serial number plate (behind left side of broiler door) Broiler door (p.
6 U SING Y OUR R ANGE U SING THE SURFACE BURNERS NOTE: Do not leave empty cookware, or cookwar e which has boiled dry , on a hot surface bur ner . The cookware could overheat, causing damage to the cookware or cooking pr oduct.
7 USING YOUR RANGE U SING THE SURFACE BURNERS ( CONT . ) In case of a prolonged power failure Y ou can manually light surface bur ners. Hold a lit match near a burner and tur n the control knob to the LIGHT position. After the burner lights, tur n the control knob to the setting you want.
8 USING YOUR RANGE Positioning racks and pans Place the oven racks where you need them before turning on the oven. • T o move a rack, pull it out to the stop position, raise the front edge and lift it out. • Be sure the rack(s) is level. • Use pot holders or oven mitts to protect your hands if rack(s) must be moved while the oven is hot.
9 USING YOUR RANGE B AKEWARE CHOICES Baki ng perf orm ance i s aff ected by th e type of bakeware u sed. Use the bakeware size r ecomm en ded in the reci pe. BA KEWA RE TYP E Light c o lo re d a luminum • Light go lde n cr us ts • Even brownin g • Use tem perat ure an d tim e recom m en ded in reci pe.
10 USING YOUR RANGE HR MIN TIMER SET TIMER OFF BAKE BAKE CUSTOM TEMP ST ART ENTER OFF CANCEL CLOCK LIGHT LIGHT AUTO CLEAN HEAT BAKE BROIL LOCK'D TIMER O N BROIL 5 SEC T HE ELECTRONIC OVEN CONTROL Start/enter pad (pp. 10, 11, 12, 14, 15, 17) Hour pads (p.
11 1. Press CLOCK. 2. Set the time. Press the “up” ( s ) or “down” ( t ) pad(s) until the correct time shows on the display . 3. Start the clock.
12 USING YOUR RANGE 3. Start the minute timer . The minute timer will begin counting down immediately after the timer is started. When the time is up: Y ou will hear four 1-second tones, then four 1-second reminder tones every minute until you press TIMER OFF.
13 Y our oven is designed with the ACCUBAKE ® temperature management system to constantly monitor oven temperature. The burner element will cycle, as needed, to maintain the desired temperature. This featur e is automatically activated when the oven is in operation.
14 USING YOUR RANGE PRESS YOU SEE OFF CANCEL (time of day) 5. Press ST ART/ENTER. A preheat conditioning time counts down the approximate pr eheat time after the oven temperature has been set and ST ART has been pressed.
15 USING YOUR RANGE Although your new oven is properly adjusted to provide accurate temperatur es, it may cook faster or slower than your old oven. If you are not satisfied with the baking/r oasting results, you can change the of fset temperature by following the steps below .
16 USING YOUR RANGE B ROILING 3. Before the br oiler is tur ned on, place your food on the broiler pan. Then place the pan on the broiler bottom (Ledge 0) or one of the two ledges and roll the br oiler pan and grid into the broiler . 4. Close the broiler door .
5. Press CUSTOM BROIL. 6. Start oven. Y ou can change the temperature setting any time after pressing ST ART/ENTER. T o change the setting, see “T o custom broil at a lower temperature” below . After changing the setting, you do not have to press ST ART/ENTER again.
18 Broiling guidelines Recommended pan positions are number ed from bottom (0) to top (2) (see “Br oiler pan and grid” earlier in this section.) Y ou should rotate the br oiler pan back to the front at the same time you turn the foods. B ROILING ( CONT .
19 C LEANING CHART Before cleaning, always make sur e all controls ar e off and the range is cool. Refer to instructions on all cleaning products befor e using them to clean your range. w W ARNING Explosion Hazard Do not store flammable materials such as gasoline near this appliance.
20 CARING FOR YOUR RANGE C LEANING CHART ( CONT . ) PART CLEANING METHOD SPECIAL INSTRUCTIONS Surface burners • See the “Sealed surface burner” section in the “Caring for your range” section. Oven cavity • Food spills containing sugar and/or milk • Soap and water • When oven cools, wash, rinse and dry with soft cloth.
21 • Occasionally check the burner flames for proper size and shape as shown. A good flame is blue in color . If the flames are uneven, you may need to clean the burner ports. Cleaning the surface burners • Y ou should routinely remove and clean the burner cap.
22 S EALED SURFACE BURNERS AND COOKTOP ( CONT . ) 5. After cleaning the gas tube opening and ports, replace the burner cap. T o replace the burner cap, make sure the alignment pins on the cap are pr operly aligned with the burner base. T o clean the burners: 1.
23 R EMOVING THE O VEN DOOR ( CONT . ) T o remove: 1. Open the oven door . Insert door removal pins, included with your range, into both hinge hangers. Do not remove the pins while the door is removed from the range. 3. Grasp the door on the sides with your fingers on the front of the door and your thumbs on the inside surface.
24 Range Front frame hinge slot 2. Hold oven door so that the top edge of each hinge hanger is horizontal. Insert hinge hangers into the front frame hinge slots. 3. Tilt top of door toward range. Slide hinge hangers down onto front frame support pins.
25 CARING FOR YOUR RANGE 4. Place your fingers in the slots in the bottom panel and lift the rear of the panel up and back until the lip at the front of the panel is clear of the front frame of the oven cavity . 5. Lift the bottom up and out. T o replace: Reverse the steps above.
26 CAUSE • The range is not plugged into a properly gr ounded outlet (120v polarized). • The range is not properly connected to the gas supply . Contact a designated service technician to reconnect the range to the gas supply . (See the Installation Instructions.
27 C OOKING RESULTS D ISPLA Y MESSAGES PROBLEM The display is showing “PF” “F” followed by a number shows on the display CAUSE • There has been a power failur e. Press OFF/CANCEL to clear the display , then reset the clock. (See page 11.) • Press OFF/CANCEL to clear the display .
28 Call the Whirlpool Consumer Assistance Center toll free at 1-800-253-1301. Our consultants are available to assist you. When calling: Please know the purchase date, and the complete model and serial number of your appliance (see the “A Note to You” s ection).
31 TOPIC P AGE ANTI-TIP BRACKET ......................................................3 ASSIST ANCE ..............................................................28 BAKING ACCUBAKE ® system ........................................13, 14 Aluminum foil .
W ARRANTY WHIRLPOOL ® G AS R ANGE WHIRLPOOL CORPORA TION WILL NOT P A Y FOR A. Service calls to: 1. Correct the installation of your range. 2. Instruct you how to use your range. 3. Replace house fuses or correct house wiring or plumbing. 4. Replace owner -accessible light bulbs.
An important point after buying a device Whirlpool SF325PEG (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool SF325PEG yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool SF325PEG - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool SF325PEG you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool SF325PEG will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool SF325PEG, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool SF325PEG.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool SF325PEG. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool SF325PEG along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
