Instruction/ maintenance manual of the product RSZZBR Whirlpool
Go to page of 24
UseAndCare A Nate ToYou 2 PamAndFeatures 4 Before Using Your Refrigerator 5 Using Your Refrigerator 7 Caring ForYour Refrigerator 18 Food Storage Guide 20 BYou Need Assistance Or Service 22 Warranty 24 l--44-ROPER Cdl us with questions or commenb.
ANaeToYou Thank you for buying a Roper applianke. You have purchased a quality, worldclass home appliance. Years of engineering experience have gone into its manufacturing. To ensure that you will enjoy many years of trouble-free operation, we have developed this Use and Care Guide.
Important Safetv Instructions --.- _- __---- - -~~ - -, ~~~- - - - - To reduce the risk of fire, electrical shock or injury when using your refrigerator, follow these basic precautions: Read all instructions before using the refrigerator. Child entrapment and suffocation are not problems of the past.
Parts And Features This section contains captioned illustrations of your appliance. Use them to become familiar with where all parts and features are located and what they look like. The model you have purchased may have all or some of the parts and features shown and they may not match the illustration exactly.
Before Using Your Refrigerator I In This Section Paw I clean R”““--..“-I--.l-------.5 lnrtall it propedy ---....,.---““---.5 Plug it in ---... . . . . I -.............- --- ..-.. -.5 Levd it ..-1.1e......-1-1-1 w.....- . . . . lt is important to prepare your refrigerator for use.
Level it Your refrigerator has 2 front leveling screws-one on the right and one on the left. To adjust one or both of these, follow the directions below. 1. Remove base grille. (See page 15.) 2. To raise front, turn screw clockwise. 3. To lower front, turn screw counterclockwise.
UsingYour Refrigerator In This Section Pa* Settingthecontois,,.---,--- ._..... 7 Changing the control settings -..-- -,.....6 Adjusting the door bins _--- . . .._.. - .--..... 6 Adjusting the refrigerator sheivea .-..-,,.S Removing the crkper and crisper covw .
Changing the control settings lf you need to adjust temperatures in refrigerator or freezer, use the settings listed in the chart below as a guide. If you have questions, call us. (See page 23.) l Adjust the Refrigerator Control first. l Wait at least 24 hours between adjustments.
Adjusting the refrigerator shelves Shelves can be adjusted to match the way you use your refrigerator. To remove shelves: 1. Remove items from shetf. 2. Tilt shelf up at front. 3. Lii shelf up at back. 4. Pull shelf straight out. To replace shelves: 1.
Removing the meat drawer and cover To remove the meat drawer: 1. Slide the meat drawer out to the stop. 2. Lii the front. 3. Slide meat drawer out the rest of the way. 4. Replace in reverse order. To remove the cover: 1. Remove crisper, crisper cover and meat drawer.
Removing the freezer trivet (RSZOCK) For proper air movement, keep the freezer trivet in place when the refrigerator is operating. To remove the trivet: 1. Lii trivet up. 2. Pull trivet forward. To replace the trivet: 1. Slide trivet into freezer cabinet.
Using the automatic ice maker (Factory-installed on RS22BR and RS25BR, optional on RS20CK) ff you have the automatic ice maker, or if you plan to add one later (Part No. IMKIT). there are a few things you will want to know l The ON/OFF lever is a wire signal arm.
Removing the ice maker storage bin (RS22BR and RS25BR) Remove, empty and clean the storage bin if: l the ice dispenser has not, or will not, be used for a week or more. l a power failure causes ice in the bin to melt and freeze together. l the ice dispenser is not used regularly.
Using the ice dispenser (RS~~BR and Rs25m) Personal Injury Hazard Tumbling ice and pressure on a fragile glass can break it. Do not use a fragile glass when dispensing ice. Doing so could resuft in personal injury or breakage. Ice is dispensed from the ice maker storage bin in the freezer.
Solving common ice maker/dispenser problems PROBLEM Ice dispenser won’t work CAUSE l Freezer door open l Ice bin not properly installed l Wrong ice in bin l Dispenser not used for extended periods, causing ice cubes to melt together SOLUTlONS l Close the freezer door.
Changing the light bulbs Electrical Shock Hazard Before removing a light bulb, either unplug the refrigerator or disconnect the electricity leading to it at the main power supply. Failure to do so could resuk in personal injury. To change refrigerator light: 1.
Understanding the sounds you may hear Your new refrigerator may make sounds that your old one didn’t. Because the sounds are new to Water sounds you, you might be concerned about them. Don’t be. Most of the new sounds are normal. Hard surfaces like the floor, walls and cabinets can make the sounds seem louder.
Caring ForYour Refrigerator In This Section PWP Cleaning your refrigerator _._..--..- -,.....19 Vacation and moving cam _.....I-.- ---.19 Pagb Power interruptiona -..--,m--..-.--.20 Your refrigerator is built to give you many years of dependable service.
PART Defrost pan WHAT TO USE Sponge or cloth with mild detergent and warm water HOW TO CLEAN l Remove base grille. (See page 15.) l To remove defrost pan, lift pan over wire brace (remove tape; if any). l Wash, rinse and dry thoroughly. l Replace with notched comer to the rear.
Power interruptions If electricity goes off, call the power company. Ask how long power will be off. 1. lf service ls to be interrupted 24 hours or less, keep both doors closed. This will help foods stay frozen. 2. lf service is to be interrupted longer than 24 hours: (a)Remove all frozen food and store in a frozen food locker.
Butter or margarine Keep opened butter in covered dish or closed compartment. When storing an extra supply, wrap in freezer packaging and freeze. Cheese Store in the original wrapping until you are ready to use it. Once opened, rewrap tightly in plastic wrap or aluminum foil.
HYou Need Assistance Or service This section is designed to help you save the cost of a service call. First we outline possible problems, their causes and their solutions.
Remember: Motor running time depends on different things: number of door openings, amount of food stored, temperature of the room, setting of controls, etc. Your new refrigerator may be larger than your old one so it has more space to be cooled. ft also has a regular freezer instead of a frozen food compartment.
ROPER” Refvigemtor Warranty LENGTH OF WARRANTY 1 ROPER WfLL PAY FOR I FULL ONE-YEAR WARRANTY (from date of purchase) Replacement parts and repair labor to correct defects in materi- als or workmanship. Service must be provided by an authorized Roper service company.
An important point after buying a device Whirlpool RSZZBR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RSZZBR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RSZZBR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RSZZBR you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RSZZBR will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RSZZBR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RSZZBR.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RSZZBR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RSZZBR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
