Instruction/ maintenance manual of the product RS67OOXK Whirlpool
Go to page of 16
whidpd 304NCH SEFJN SELF-CLEANING ELECTRIC RANGE Models RS67OOXK; RSWOPXK Automalic Oven Porcelatn-Enamel’ Reflector Bowl wlth Chrome lrlm Model and Serial / Copy Your Model and Serial Numbers Here Model Number 1 Complete Model one S-r,.
Your responsibilities.. . Proper installation and safe use of the range exe your pe’ssnal responsibilities. Read this “Use and Care Guidk’and tire ‘;tcokiag Guide”carefully for important use and safety information. Installathn -B-v - -w---w You must be sure your range is.
3.
Using your range Automatic MEALTIMER’ Clock StopTime Knob ,Sur(ace Unit lndrcators Surface Unit Control Knobs -Srgnol Lights / Minute Timer / Start Time Knob SURFACE UNIT CONTROLS Control knobs must be pushed in before turning them to a setting. They con be set anywhere between HI and OFF.
Oven Signal Light Clean Light Lock Light I Oven Selector Adjustable Oven Temperature Control 4. Let the oven preheat until the Slgnal Light goes off 5. Put food In the oven 6. ‘When done baking, turn both knobs to OFF Durlng baklng, the elements will turn on and off to help hold the oven temperature at the setting.
1. Place the rack where you want it for broiling. [See below for suggestions.) 4. Se1 Oven Temperature Control to BROIL [Set on a lower temperature for slower brorlrng See below ) 2. Put broiler pan and food 3. Set Oven Selector to on the rack BROIL 5.
Su gested oven-rack positions and broiling times for di # erent kinds of meats. Approximate Minutes - Inches [cm) tram top Selector set to BROIL Food Descrbtlon of food to Broil Element 1st side 2nd side ~~ Beef Steaks Rare 1 (2.5 cm) 3 (8 cm) 7-9 3-5 Medium 1 (2Scm) 3 (8cm) 9-l 1 4-7 Well done 1 (2.
USING THE AUTOMATIC MEALTIMER’:’ CLOCK The Automatic MEALTIMER Clock IS designed to turn the oven on and off at times you set even when you are not around. To start and stop baking automatically: 1. Put the racks where you want them and place the food In the oven 2.
THE OVEN LIGHT The oven light will come on when you open the oven door. It goes off when the door is closed. To replace the light bulb: 1. Turn off the electric power at the main power supply. 4. Replace the buz with a 40-watt appliance bulb available from most gro- cery, variety and hardware stores.
for youirange CONTROL PANELS AND KNOBS 1. First make sure knobs are set on OFF then pull knob stralght off. / / 2. Use warm soapy water and a soft cloth to wipe the panel Rinse and wipe dry. 3. 4. 10 Wash knobs rn warm soapy water. Rinse well and dry SURFACE UNITS AND REFLECTOR BOWLS REMOVING 1.
Terminal 3. Hold the surface unit as level as possible with the terminal lust started Into the receptacle 4. While pushing the surface unit terminal Into the receptacle.
USING THE SELF-CLEANING CYCLE The self-cleaning cycle uses very high heut to burn away soil. Before you start, make sure you understand exactly how to use the cycle safely. BEFORE YOU START 2. Remove any pots or pans you may have stored in the oven They can’t stand the Clean Frame Clean Door DO NOT Clean Seal high heat.
SETTING THE CONTROLS 1. Set the Oven Selector to 2. Set the Oven Temperature CLEAN Control to CLEAN. 3. Make sure the clock and start and stop time dials all have the right time of day. 4. Push in the Stop Time Knob and turn the hand clock- wise about two or three hours.
HOW IT WORKS During the self-cleaning cycle, the oven gets much hotter than it does for baking or broiling...approximately 875: F (468’C). This heat breaks up grease and soil, and burns it off. The graph shows approximate temperatures and times during a self-cleaning cycle set for two hours.
If you need service or assistance, we suggest you follow these four steps: 1 l Before caning for as& tance . . . 2 l Ifyou need assistance”. . . -, Performance problems often result from little things you can find and fix yourself with- out tools of any kind.
FSP quolrty parts took for this symbol of qualrty whenever you need a replacement part k for your Whrrlpool appliance FSP replacement parts wrll frt right and work rrght, because they are made to the .
An important point after buying a device Whirlpool RS67OOXK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RS67OOXK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RS67OOXK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RS67OOXK you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RS67OOXK will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RS67OOXK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RS67OOXK.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RS67OOXK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RS67OOXK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
