Instruction/ maintenance manual of the product RS675PXY Whirlpool
Go to page of 40
A Note To You 2 Important Safety lnstnrctions 3 Parts And Features 6 Using Your Range 7 Usin The Self- E leaning Cycle 27 Caring For Your Range 31 If You Need ~~~ .
A Note To You Thank you for buying a Whirlpool appliance. You have purchased a quality, world-class home appliance. Years of engineering experience have gone into its manufacturing. To ensure that you will enjoy many years of trouble-free operation, we have developed this Use and Care Guide.
Important Safety Instructions To reduce the risk of fire, electrical shock, injury to persons, or damage when using the range, follow basic precautions, including the following: General l Do not operate the range if it l Read all instructions before is damaged or not working using the range.
l Do not wear loose or hanging garments when using the range. They could ignite if they touch a hot surface unit and you could be burned. l Use only d potholders. Moist or damp po holders on hot r surfaces ma result in burns from steam. ‘b 0 not let potholder touch hot heating elements.
Grease l Grease is flammable. Do not allow grease to collect around cooktop or in vents. Wipe spill- overs immediately. hood or open window and wiping out excess food spills pnor to self-cleaning. l Do not use water on grease fires. Never pick up a flaming pan.
Parts And Features This section contains captioned illustrations of your range. Use them to become familiar with the location and appearance of all parts and features. Cooktop control panel Pluqin 8urface unit with onbpiece chrome reflector bowl I cooktop control panel n.
Using Your Range In This Section Paw Using the surface units ..................................... .7 Positioning recks and pana ............................... 9 For lwet air circulation ...................................... .9 Using aluminum foil for baking .
Until you get used to the settings, use the following as a guide. For best results, start cooking at the high setting; then turn the control knob down to continue cooking. SETTING 1 RECOMMENDED USE vegetables. Medium-low 1 l To keep food cooking after LO starting it on a higher setting.
Positioning racks and pans For baking/roasting with one rack, place the rack so the top of the food will be centered in the oven. Rack placement for specific foods: I 4 FOOD 1 RACK POSITION 1 Frozen pies, large roasts, turkeys Personal Injury Hazard l Alwavs position oven rack(s) in desired locatibn’before turning oven.
Using aluminum foil for baking Use aluminum foil to catch spillovers from pies or casseroles. l Place the foil on the oven rack below the rack with the food. Turn up foil edges and make sure foil is about 1 inch (3 cm) larger all around than the dish holding the food.
Command pads The command pads tell the oven what to do and in what order. A few examples: -Clock/Set tells the oven you are going to set the clock. Each command pad (except Off/Cancel and Start/Enter) has its own indicator. The indicator comes on when you push the command pad.
2. 3. Use the Hour and Minute pads to set the desired time. Push the “up” (A) or “down” (V) pad(s) until the correct time shows in the display. Push the Start/Enter pad. The Minute Timer will begin counting down immediately after the timer is started.
Baking/roasting 1. Position the rack(s) properly before turning on the oven. To change rack position, lift rack at front and pull out. For further informa- tion, see “Positioning racks and pans” on page 9. 2. Push the Bake pad. “350”” will light up in the small display to show the preset temperature and BAKE will light up.
Adjusting the oven temperature control Oven temperature controls will gradually shift after years of use. So, even though your new oven is properly adjusted to provide accurate temperatures, it may cook faster or slower than your old oven.
Broiling 1. Position the rack before turning the oven on. Sea “Broiling rack position chart” on page 16. 2. Put the broiler pan and food on the rack. 3. Close the door to the Broil Stop position (open about 4 inches [lo.2 cm]). The door will stay open by itself.
To broil at a lower temperature: l lf food is cooking too fast, push the Broil pad and push the V Temp pad until ‘325”” shows in the small display. l tf you want food to broil slower from the start, push the Broil pad and push the V Temp pad so a temperature between 170°F and 325°F (77°C and 163°C) shows in the small display.
Energy saving tips Although the energy used for cooking is usually a very small percentage of the total energy used in the home, cooking energy can be used efficiently. Here are some tips to help you save energy when using your cooking product. l Use pans with flat bottoms, straight sides and tight-fitting lids.
2. Push the Bake pad to enter the Bake mode. Use the Temp pad(s) to set the desired temperature. Push A to raise the temperature or to lower the temperature in 5°F increments.
To cancel the MEALTIMER” control setting: l Push the Off/Cancel pad to return the display to the time of day. Method Z-Using Stop Time: 1. Position the oven rack(s) properly and put food in the oven. 2. Push the Bake pad to enter the Bake mode. Use the Temp pad(s) to set the desired temperature.
7. When the baking/roasting time is corn- pleted, the oven will turn off automatically, beep four times and “End” will show in the display. You will also hear four 1 -second tones every minute until you push the Off/Cancel pad. NOTE: To disable reminder tones, push and hold the Cook Time pad for 4 seconds.
5. Push the Delay Start Time pad. The time of day with the colon flashing will show in the display and START TIME will light up. 6. Use the Hour and Minute pads to set the desired start time. Push the “up” (A) or “down” (V) pad(s) until the correct time shows in the display.
To cancel the MEALTIMER” control setting: l Push the Off/Cancel pad to return the display to the time of day. Method Z-Using Start Time and Stop Time: 1. Position the oven rack(s) properly and put food in the oven. 2. Push the Bake pad to enter the Bake mode.
6. Use the Hour and Minute pads to set the de- sired stop time. Push the “up” (A) or “down” (V) pad(s) until the correct time shows in the display. This example shows a desired stop time of 2:30. This provides a cook time of 30 minutes (the difference between the start and stop times).
Method 3-Using Cook Time and Stop Time: 1. Position the oven rack(s) properly and put food in the oven. 2. Push the Bake pad to enter the Bake mode. Use the Temp pad(s) to set the desired temperature. Push A to raise the temperature or V to lower the temperature in 5°F incre- ments.
6. Use the Hour and Minute pads to set the desired stop time. Push the “up” (A) or “down” (V) pad(s) until the correct time shows in the display. This example shows a desired stop time of 2:30. The oven will automatically start cooking at 2:00 (the set stop time minus the set cook time).
To avoid sickness and food waste when using the MEALTIMER”control: l Do not let most UNFROZEN food stand for more than two hours before cooking starts. l Do not allow food to remain in oven for more than two hours after the end of cooking cycle. NOTE: Do not use foods that will spoil while waiting for cooking to start.
Using The Self-Cleaning Cycle I In This Section Page Paw I How the cycle works 27 getting the controls 28 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . s . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
l Remove the broiler pan grid and any pots and pans being stored in the oven. NOTE: You can clean the broiler pan (without grid) in the oven if you have first removed most of the soil by hand-cleaning or a dishwasher. If most of the soil is not removed, too much smoking will occur.
If a cleaning cycle other than 3 hours is desired, use the Hour and Minute pads to set the desired cleaning time. Push the “up” (A) or “down” (V) pad(s) until a time between 2-4 hours shows in the display. l Use 2 hours for light soil. l Use 3-4 hours for moderate to heavy soil.
6. After the Self-Cleaning cycle is started, LOCKED lights up in the display when the oven temperature goes above normal baking/ roasting temperatures. The Lock Lever must not be moved and the door cannot be opened when LOCKED is on. 7. After the Self-Cleaning cycle is completed, the time of day will show in the display.
Caring For Your Range I In This Section Page Page I Surface units and reflector bowls ................. .31 Cleaning chart ................................................. .34 Removing the oven window ........................... .33 The oven light ..
4. Lift out the reflector bowl. See “Cleaning Chart” on page 34 for cleaning instructions. Replacing 1. Make sure all control knobs are turned off and cool before replacing surface units and reflector bowls. 2. Line up openings in the reflector bowl with the surface unit receptacle and the element hold- down clip.
4. When the terminal is pushed into the recep- tacle as far as ii will go, push down the edge of the surface unit opposite the receptacle. The element hold-down clip will keep the surface unit from moving around. NOTE: Reflector bowls reflect heat back to the utensils on the surface units.
Cleaning chart Use the following table to help you clean all parts of your range. PART WHAT TO USE HOW TO CLEAN Control knobs Sponge and warm, soapy l Turn knobs to OFF and pull straight away water from control panel. l Wash, rinse and dry thoroughly.
The oven light The oven light will come on when you open the oven door. To turn the light on when the oven door is closed, use the Oven Light Switch on the control panel. Electrical Shock and Personal Injury Hazard l Make sure oven and light bulb are cool and power to the range has been turned off before replacing the light bulb.
If You Need Assistance Or Service This section is designed to help you save the cost of a service call. Part 1 of this section outlines possible problems, their causes, and actions you can take to solve each problem. Parts 2 and 3 tell you what to do if you still need assistance or service.
PROBLEM Cooking results are not what you expected I The display shows “PF” “F, 3. or “F.J” shows in the display POSSIBLE CAUSE The range is not level. The oven temperature seems too low or too high. You have not preheated the oven as the recipe calls for.
2. If you need assistance . . . Call Whirlpool Consumer Assistance Center telephone number. Dial free from anywhere in the U.S.: l-800-253-1301 and talk with one of our trained consultants.
39.
WHIRLPOOL” Electric Cooking Product Warranty LENGTH OF WARRANTY FULL ONE-YEAR WARRANTY From Date of Purchase LIttIlTED WARRANTY FOR LIFE OF THE PRODUCT Second Year Through Life of Product From Date of Purchase WHIRLPOOL WILL PAY FOR FSP’ replacement parts and repair labor to correct defects in materials or workmanship.
An important point after buying a device Whirlpool RS675PXY (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RS675PXY yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RS675PXY - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RS675PXY you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RS675PXY will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RS675PXY, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RS675PXY.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RS675PXY. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RS675PXY along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
