Instruction/ maintenance manual of the product RS660BXV Whirlpool
Go to page of 24
.
Contents Page BEFORE YOU USE YOUR RANGE 2 IMPORTANT SAFETY INSTRUCTIONS. 3 PARTS AND FEATURES 4 USING YOUR RANGE. 5 Using the Surface Units 5 Optional Canning Kit 6 Setting the Clock 7 Using the Minut.
IMPORTANT 1. DO NOT allow children to use or 6. KEEP pan handles turned in, but ploy with any port of the range, not over another surface unit to or leave them unattended near it. ovoid burns, injury and to help They could be burned or injured. prevent the utensil from being 2.
Parts and features Model RS660BXV AUTOMATIC MEALTIMER* STOP CLO~KIMINUTE TIMER T!ME SURFACE UNIT INDICATOR LEFT REAR START CONTROL KNOB TIME ONE-PIECE CHROME REAR SURFACE REFLECTOR BOWLS UNIT SIGNAL L.
OVEN “HEATING” Using your range Using the Surface Units Control knobs must be pushed in before turning them to Q setting. They con be set anywhere between HI and OFF. Surface Unit Indicators The solid dot in the surface unit indicator shows which surface unit is turned on by that knob.
Use only flat-bottomed utensils for best cooking results and to prevent damage to the cooktop. Specialty items with rounded or ridged bottoms [woks, ridged bottom canners or tea kettles] are not recommended. See the Cooking Guide for important utensil information.
Setting the Clock Push in and turn the Minute Timer Knob to set the Clock. 1. Push in Minute Timer Knob and turn clockwise until clock shows the right time of day. 2. let the Minute Timer Knob pop out. Turn clockwise until Minute Timer hand points to OFF.
Using the Oven Controls Baking Position the rack(s) properly before turning on the oven. To change rack position, lift rack at front and pull out. The rack(s) should be placed so the top of the food will be centered in the oven. Always leave at least 1Yz to 2 inches (4-5 cm] between the sides of the pan and the oven walls and other pans.
Adjusting the Oven Tempemture Control Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without you noticing the change. Your new oven is properly adjusted to provide accurate temperatures.
Broiling 1. Position the rack before turning the oven on. See “Broil Chart” in the Cooking Guide or a reliable cookbook for recommended rack positions. 3. Close the door to the Broil Stop position (open about 4 inches, 10.2 cm]. The door will stay open by itself.
Using the Automatic MEALTIMER* Clock The automatic MEALTIMER* Clock is designed to turn the oven on and off at times you set, even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven, such as meats and casseroles.
To start baking now and stop automatically: 1. Position rack(s) properly and place the food in the oven. 2. Make sure the clock is set to the right time of day. 3. Push in and turn the Stop Time Knob clockwise to the time you want the oven to shut off.
Optional Rotisserie If you would like a rotisserie for your oven, you can order a kit (Part No. RCK-79/261881) from your Whirlpool Dealer. The kit includes easy installation instructions. Optional Door Panel Pat If you would like to change the color of your oven door glass to white or almond, you can order one of these kits; White (Kit No.
Surface Units and Reflector Bowls 2. Lift the edge of the unit, opposite the receptacle, just enough to clear the element hold down clip and the reflector bowl. 3. Pull the surface unit straight away from the receptacle. 4. Lift out the reflector bowl.
3. Hold the surface unit as level as possible with the terminal just started into the receptacle. Push the surface unit terminal into the receptacle. 2. Line up 0~ bowl with tacle and clip. lenings in the reflector the surface unit recep- the element hold dow 4.
Using the Self-Cleaning Cycle The Self-Cleaning cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how to use the Self-Cleaning cycle safely. Before You Start 1. Clean the shaded areas by hand. They do not get hot enough DO NOT clean the fiberglass seal.
Setting the Controls Be sure the k&hen Is ventilated during the SeWCleanIng cycle. This will help normal smoke and heat odors to disappear from the room as quickly as posslbl 4. Set the Oven Selector and Oven Temperature Control on CLEAN. The “on” Signal Light will come on, 3.
Special Tips l Keep the kitchen well ventilated during the Self-Cleaning cycle to help get rid of normal heat, odors and smoke. l Clean the oven before it gets heavily soiled. Cleaning a very soiled oven takes longer and results in more smoke than usual.
Cleaning Chart PART WHAT TO USE HOW TO CLEAN Exterior surtaces (stalnless steel finish) Warm soapy water and a soft cloth. Plastic scrubbing pad for stubborn spots. l Wipe off regularly when range is COOI. l Do not allow food containing acids (such as vinegar, tomato, lemon juice or milk) to remain on surface.
The Oven Light The oven light will come on when you open the oven door, To Replace: 3. Remove the light bulbfrom its socket. Replace the bulb with a 40-watt appliance bulb. 2. Remove the bulb cover in the back of the oven by pulling out and pushing the wire holder to the side.
If you need service or assistance, we suggest you follow these five steps: 1. Before calhg for if cooking results aren’t what you assistance... expected: Performance problems often result from little things you can find and fix without tools of any kind.
3. If you need service*... Whirlpool has a nationwide network of fran- chised TECH- CAREa Service TECH-CARE Companies. FRANCHISED SERVICE TECH-CARE serv- ice technicians are trained to fulfill the product war- ranty and provide after-warranty service,anywhere in the United States.
Notes 23.
WHIRLPOOL” RANGE PRODUCT WARRANTY EROOI LENGTH OF WARRANTY WHIRLPOOL WILL PAY FOR FULL ONE-YEAR WARRANTY FSP” replacement parts and repair labor to From Date of Purchase correct defects in materials or workmanship. Service must be provided by a franchised TECH-CARE 1 service company.
An important point after buying a device Whirlpool RS660BXV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RS660BXV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RS660BXV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RS660BXV you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RS660BXV will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RS660BXV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RS660BXV.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RS660BXV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RS660BXV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
