Instruction/ maintenance manual of the product RS610PXE Whirlpool
Go to page of 52
TM Use And Care GUIDE ST ANDARD-CLEANING ELECTRIC DROP-IN RANGE MODEL RS610PXE PART NO. 4450273 Table of Contents (complete) ................... 2 A Note to You ................. 3 Range Safety ............... 4-7 Getting to Know Your Range ..........
2 T able of Contents A Note to Y ou ........................................... 3 Range Safety ......................................... 4-7 Getting to Know Y our Range ................... 8 Using Y our Range ..................................... 9 Using the coil elements .
3 Model Number __________________________ Serial Number __________________________ Purchase Date __________________________ Dealer Name ___________________________ Dealer Address _________________________ Dealer Phone ___________________________ 1-800-253-1301 A Note to Y ou Thank you for buying a WHIRLPOOL ® appliance.
4 Range Safety IMPOR T ANT SAFETY INSTRUCTIONS w W ARNING T o reduce the risk of fire, electrical shock, injury to persons, or damage when using the range, follow basic precautions, including the following: General • Read all instructions before using the range.
5 RANGE SAFETY • CAUTION: Do not store things children might want above the range. C hildren could be burned or injured while climbing on it. • Do not leave children alone or unattended in area where the range i s i n use. They should never be allowed to sit or stand on any part of the range.
6 RANGE SAFETY • Do not heat unopened containers. They could explode. The hot contents could cause burns and container particles could cause injury. • Use only cookware approved for oven use. Follow cookware manufacturer’s instructions, espe- cially when using glass or plastic cookware.
7 – SA VE THESE INSTRUCTIONS – Grease • Grease is flammable. Do not allow grease to collect around cooktop. Wipe spillovers immediately. • Do not use water on grease fires. Never pick up a flaming pan. Smother flaming pan on range by covering with a well-fitted lid, cookie sheet, or flat tray.
8 O F F OFF H I HI L O LO OFF OFF HI HI LO LO O F F OFF HI HI L O LO OFF OFF HI HI L O LO E L E C T R O N IC O V E N C O N T R O L ELECTRONIC OVEN CONTROL HR HR MIN MIN COOK COOK TIME TIME DELA DELA Y.
9 Until you become familiar with the settings, use the chart at right as a guide. For best results, start cooking at the high setting; then turn the control knob down to continue cooking. SETTING RECOMMENDED USE HI • To start foods cooking. • To bring liquids to a boil.
10 USING YOUR RANGE Cookware tips • Use the correct cookware to prevent damage to the coil elements, cooktop, wiring, and surrounding areas. • If the cookware is too small for the coil element or the bottom is not flat, the coil element could stay glowing red for an extended length of time causing damage to the range.
11 Positioning racks and pans General guidelines • Before turning on the oven, place oven racks where you need them. • To move rack(s), lift rack(s) at front and pull out. • Be sure the rack(s) is level. • Use pot holders or oven mitts to protect your hands, if rack(s) must be moved while the oven is hot.
12 For best air circulation Hot air must circulate around the pans in the oven for even heat to reach all parts of the oven. This results in better baking. • Place the pans so that one is not directly over the other. • For best results, allow 1 1 ⁄ 2 to 2 inches of space around each pan and between pans and oven walls.
13 The electronic oven control Display/clock • When you first plug in the oven, every- thing on the display will light up for a few seconds, then a time of day and “PF” will appear on the temperature display. If after you set the clock (see “Setting the clock”), “PF” again appears on the display, your electricity was off for a while.
14 Command pads The command pads tell the oven what to do and in what order. Some command pads have an Indicator Light. The Indicator Light comes on when you press the command pad. The ON Indicator Light comes on when you press the Start/Enter pad for an oven function.
15 Setting the clock 1. Press Clock pad. 2. Set time. Press the “up” ( ▲ ) or “down” ( ▼ ) pad(s) until the correct time shows on the display. 3. Start clock. Disabling the clock display: If you do not want the clock time displayed, press and hold the Clock pad for 5 seconds.
16 Using the electronic Minute Timer The Minute Timer does not start or stop the oven. It works like a kitchen timer. It can be set in hours and minutes up to 12 hours 59 minutes. The Minute Timer will display minutes and seconds for settings under 1 hour.
17 4. Turn off Minute Timer. To cancel the Minute Timer: Press Timer Off pad. Disabling the timer reminder tones: NOTE: To disable the reminder tones , press and hold the Timer Set pad for 5 seconds.
18 Baking/roasting NOTE: See “Roasting tips” later in this section. 1. Position racks. For more information, see “Positioning racks and pans.” 2. Choose baking/roasting setting. 3. Set temperature (optional). Do this step if you want to set a tempera- ture other than 350°F.
19 5. Press the Start/Enter pad. A preheat time will count down on the display. The oven control automatically sets preheat times depending on the oven temperature you select. TEMPERATURE (in °F) 0-325 330-375 380-500 As the countdown ends, the set tempera- ture replaces “PrE” on the display.
20 Roasting tips • For even cooking, place the meat on a rack in a shallow pan. This keeps the meat out of the drippings and allows the heat to circulate better. • Use a meat thermometer for the most accurate doneness. Insert it so the tip is in the center of the largest muscle or thickest portion of the meat or poultry.
21 2. Set new offset temperature. Press ▲ to raise the temperature or ▼ to lower the temperature in 10°F amounts. You can set the temperature change to as low as -30°F or as high as +30°F. A minus (-) sign will appear before the number when decreasing the tempera- ture setting to show the oven will be cooler by the displayed amount.
22 Broiling NOTES: • Preheating is not necessary when broiling, unless your recipe recommends it. • See “Broiling tips” later in this section. 1. Position rack. NOTE: See the “Broiling rack position chart” for rack placement positions. 2. Put food on broiler pan and place in center of oven rack.
23 6. When broiling is done, turn off oven. To custom broil at a lower temperature: • If food is cooking too fast, press the Custom Broil pad and press the ▼ Temp pad until “325°F” shows on the small display. NOTE: If the Temp pads are held down the temperature will change faster.
24 Custom broil chart The recommended rack position is numbered lowest (1) to highest (5). For best results, as a general rule, turn meat over after approximately 2 ⁄ 3 of the broiling time. Turn chicken pieces over after approximately 1 ⁄ 2 of the broiling time.
25 Broiling tips • Use the broiler pan and grid for broiling. They are designed to drain extra liquid and grease away from the cooking surface. This drainage helps prevent spatter, smoke, or fire. • Do not cover the broiler grid with foil. • To make sure grease drains well , do not use cookie sheets or similar pans for broiling.
26 w W ARNING Food Poisoning Hazard Do not let food sit in oven more than one hour before or after cooking. Doing so can result in death, food poisoning, or sickness. Using the electronic MEAL TIMER TM control The electronic MEALTIMER control will turn the oven on and off at times you set, even when you are not around.
27 3. Set temperature (optional). Do this step if you want to set a tempera- ture other than 350°F. Press s to raise the temperature or t to lower the tem- perature in 5°F amounts. Use these pads until the desired temperature shows on the small display.
28 7. When baking/roasting is done: The oven will turn off automatically and beep 4 times. You will also hear four 1-second tones every minute (unless they have been disabled [see “Disabling the timer reminder tones” in the “Using the electronic Minute Timer” section]) until you press the Off/Cancel pad.
29 USING YOUR RANGE continued on next page 3. Set temperature (optional). Do this step if you want to set a tem- perature other than 350°F. Press ▲ to raise the temperature or ▼ to lower the temperature in 5°F amounts. Use these pads until the desired temperature shows on the small display.
30 7. When baking/roasting is done: The oven will turn off automatically and beep 4 times. You will also hear four 1-second tones every minute (unless they have been disabled [see “Disabling the timer reminder tones” in the “Using the electronic Minute Timer” section]) until you press the Off/Cancel pad.
31 4. Press Cook Time pad. 5. Set cook time. Press the “up” ( s ) or “down” ( t ) pad(s) until the correct time shows on the display. 6. Press Delay Start Time pad. 7. Set start time. Press the “up” ( s ) or “down” ( t ) pad(s) until the correct time shows on the display.
32 9. When start time is reached: A 1-second tone will sound. The display will count down the baking/ roasting time in hours and minutes (if cook time is more than 1 hour) or in minutes and seconds (if cook time is less than 1 hour). 10. When baking/roasting is done: The oven will turn off automatically and beep 4 times.
33 3. Set temperature (optional). Do this step if you want to set a tempera- ture other than 350°F. Press s to raise the temperature or t to lower the temperature in 5°F amounts. Use these pads until the desired temperature shows on the small display.
34 8. Complete entry. NOTES: • You can change the temperature or time settings any time after pressing the Start/Enter pad by repeating Steps 2 through 7. • The display will show “door” and the heating elements will not heat if the door is open when you try to bake/roast.
35 2. Choose Bake setting. 3. Set temperature (optional). Do this step if you want to set a tempera- ture other than 350°F. Press s to raise the temperature or t to lower the temperature in 5°F amounts. Use these pads until the desired temperature shows on the small display.
36 YOU SEE O N F BAKE HEAT D TIME TIME COOK (display counts down cook time) YOU SEE TIME COOK (example shows 2:30 stop time) PRESS YOU SEE HR MIN F BAKE STOP TIME 7. Set stop time. Press the “up” ( s ) or “down” ( t ) pad(s) until the correct time shows on the display.
37 11. Turn off oven. NOTE: You can do this step any time to cancel the MEALTIMER TM control setting. The oven vent Hot air and moisture escape from the oven through a vent. The vent for the oven is above the oven door. This vent is needed for air circulation.
38 HOW TO CLEAN • Turn knobs to OFF and pull straight away from control panel. • Wash, rinse, and dry thoroughly. Do not soak. • Do not use steel wool or abrasive cleansers. They may damage the finish of the knobs. • Replace knobs. Make sure all knobs point to OFF.
39 WHAT TO USE Sponge and warm, soapy water Steel-wool pad and warm, soapy water Steel-wool pad and warm, soapy water Paper towel and spray glass cleaner OR Warm, soapy water and a nonabrasive, plasti.
40 CARING FOR YOUR RANGE Coil elements and reflector bowls Removing 1. Make sure all coil elements are off and cool before removing the coil elements and reflector bowls. 2. Lift the edge of the coil element, opposite the receptacle, just enough to clear the element hold-down clip and the reflector bowl.
41 3. Hold the coil element as level as possible with the terminal just started into the receptacle. Push the coil element termi- nal into the receptacle. 4. When terminal is pushed into the recep- tacle as far as it will go, push down the edge of the coil element opposite the receptacle.
42 Removing the oven door For normal use of your oven, you do not need to remove the door. However, if you have to remove the door follow the instruc- tions in this section. The oven door is heavy. Use both hands to remove and replace the door. Do not lift and carry the door by the handle.
43 The oven lights The oven lights will come on when you open the oven door. To turn the lights on when the oven door is closed, press the Oven Light pad LIGHT on the control panel. To replace an oven light: 1. Disconnect power and make sure the oven is cool before replacing the light bulb.
44 PROBLEM The oven will not operate The coil elements will not operate The control knob(s) will not turn Display is blank CAUSE • You have not set the electronic control correctly. Refer to the section in this manual describing the function you are operating.
45 PROBLEM Cooking results are not what you expected The display is showing “PF” “F” followed by a number shows on the display CAUSE • The range is not level. (See Installation Instructions.) • The oven temperature seems too low or too high.
46 Requesting Assistance or Service Before calling for assistance or service, please check the “Troubleshooting” section. It may save you the cost of a service call. If you still need help, follow the instructions below. 1. If you need assistance * … Call Whirlpool Consumer Assistance Center telephone number.
47 NOTES.
48 NOTES.
49 NOTES.
50 Index This index is alphabetical. It contains all the topics included in this manual, along with the page(s) on which you can find each topic. TOPIC PAGE AIR CIRCULATION .................................. 12 ASSISTANCE .............................
51 TOPIC PAGE PANS ....................................................... 11 PARTS ....................................................... 8 RACKS ..................................................... 11 REMOVING THE OVEN DOOR .............. 42 ROASTING Aluminum foil .
WHIRLPOOL WILL NOT PAY FOR A. Service calls to: 1. Correct the installation of your range. 2. Instruct you how to use your range. 3. Replace house fuses or correct house wiring. 4. Replace owner-accessible light bulbs. B. Repairs when your range is used in other than normal, single-family household use.
An important point after buying a device Whirlpool RS610PXE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RS610PXE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RS610PXE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RS610PXE you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RS610PXE will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RS610PXE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RS610PXE.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RS610PXE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RS610PXE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
