Instruction/ maintenance manual of the product RM770PXA Whirlpool
Go to page of 36
A Note To You 2 Important Safety h5tructions 3 Parts And Features 5 Using Your Oven 6 Usin The Setf -El eaning Cycle 25 Carin For Your ven 8 29 tf Y?u Need i%PM?E 32 Warranty 36 1-800-253-1301 Call us with questions or comments.
A Note To You Thank you for buying a Whirlpool appliance. You have purchased a quality, worldclass home appliance. Years of engineering experience have gone into its manufacturing. To ensure that you will enjoy many years of trouble-free operation, we have developed this Use and Care Guide.
Important Safety Instructions General l Read all instructions before using the oven. l Install or locate the oven only in accordance with the pro- vided Installation Instructions. The oven must be installed by a qualified installer. The oven must be roperly connected to electrica P supply and grounded.
l Do not heat unopened contain- ers. They could explode. The hot contents could cause burns and container particles could cause injury. l Do not store flammable materi- als on or near the oven. The fumes can create an explosion and/or fire hazard. When using the oven l Always position oven rack(s) in desired location while oven IS cool.
Parts And Features This section contains captioned illustrations of your appliance. Use them to become familiar with the location and appearance of all parts and features.
Using Your Oven In This Section Page Positioning racka and pans ............................... 6 For beat air circulation ...................................... .7 Using aluminum foil for baking.. ...................... .7 The electronic oven control .
For best air circulation The hot air must circulate around the pans in the oven for even heat to reach all parts of the oven. This results in better baking. l Place the pans so that one is not directly over the other. l For best results, allow 1 ‘% to 2 inches (4-5 cm) of space around each pan and between pans and oven walls.
The electronic oven control Electronic Clock Minute timer set selector pads pa& MEALTIMER pada pads enter cancel control pads pad pad Display/clock Command pads l When you first plug in the oven, a time of day and “PF will show in the temperature display.
Setting the clock 1. 2. 3. Push the Clock/Set pad. The colon flashes and TIME will light up in the display. Use the Hour and Minute pads to set the time of day. Push the “up” (A) or “down” (V) pad(s) until the correct time shows in the display.
3. Push the Start/Enter pad. The Minute Timer will begin counting down immediately after the timer is started. When time is up, “End” will show in the large display and you will hear four P-second tones. You will also hear four l-second tones every minute until you push one of the two Timer pads.
Baking/roasting 1. Poaltion the rack(s) properly bafon turning on the oven. To change rack position, lift rack at front and pull out. For further information, sea “Positioning racks and pans” on page 6. 2. Purh the Bake pad. 366’ will light up in the small display to show the preset temperature and BAKE will light up.
Adjusting the oven temperature control Oven temperature controls will gradually shift after years of use. So, even though your new oven is properly adjusted to provide accurate temperatures, it may cook faster or slower than your old oven.
Broiling NOTE: Preheating is not necessary when broiling. 1. Position the rack before turning the oven on. See “Broiling rack position chart” on page 14. 2. Put the broiler pan and food on the rack. 3. Close the door to the Broil Stop position (open about 4 inches [lo.
Broiling rack position chart RACK POSlTlOh FROM BOTTOM TYPE OF FOOD/ DONENESS Hamburger patties and thin steaks, W” thick or less Quickly searing food, rare and medium steaks, medium patties, ham sl.
Using the electronic MEALTIMER” control The electronic MEALTIMER” control will turn the oven on and off at times you set . . . even when you are not around. Delayed time baking/roasting is ideal for foods which do not require a preheated oven, such as meats and casseroles.
4. Use the Hour and Minute pads to set the desired cooking time. Push the “up” (A) or “down” (V) pad(s) until the correct time shows in the display.
2. Push the Bake pad to enter the Bake mode. Use the Temp pad(s) to set the desired temperature. Push A to raise the temperature or V to lower the temperature in 5°F incre- ments. Use these pads until the desired temperature shows in the small display.
To delay start and stop automatically Method l-Using Cook Time and Delay Start Time: 1. Position the oven rack(s) property and put food in the oven. 2. Push the Bake pad to enter the Bake mode. Use the Temp pad(s) to set the desired temperature. Push A to raise the temperature or V to lower the temperature in 5’F incre- ments.
Use the Hour and Minute pads to set the desired start time. Push the “up” (A) or “down” (V;ryd(s) until the correct time shows in the This example shows a desired start time of 2 o’clock. The oven will automatically shut off at 2:30 (the set start time plus the set cook time).
Method 2-Using Delay Start Time and Stop Time: 1. Position the oven rack(s) properly and put food in the oven. 2. Push the Bake pad to enter the Bake mode. Use the Temp pad(s) to set the desired temperature. Push A to raise the temperature or V to lower the temperature in 5°F incre- ments.
6. Use the Hour and Minute pads to set the desired stop time. Push the “up” (A) or “down” (V) pad(s) until the correct time shows in the display. This example shows a desired stop time of 2:30. This provides a cook time of 30 minutes (the difference between the start and stop times).
Method 3-Using Cook Time and Stop Time: 1. Position the oven rack(s) properly and put food in the oven. 2. Push the Bake pad to enter the Bake mode. Use the Temp pad(s) to set the desired temperature. Push A to raise the temperature or V to lower the temperature in 5°F incre- ments.
This example shows a desired stop time of 2:30. The oven will automatically start cooking at 2:00 (the set stop time minus the set cook time). 7. Push the Start/Enter pad. DELAY and BAKE will light up in the display to show that the oven is programmed to start at a later time.
The oven vent Ovai vent 24.
Using The Self-Cleaning Cycle In This Section Paw How the cycle works . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25 Before you start . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
l Remove the broiler pan grid and any pots and pans being stored in the oven. NOTE: You can clean the broiler pan (without grid) in the oven if you have first removed most of the soil by hand-cleaning or a dishwasher. If most of the soil is not removed, too much smoking will occur.
If a cleaning cycle other than 3 hours is desired, use the Hour and Minute pads to set the desired cleaning time. Push the “up” (A) or “down” (r) pad(s) until a time between 2-4 hours shows in the display. l Use 2 hours for light soil. l Use 3-4 hours for moderate to heavy soil.
To delay the start using Delay Start Time: Push the Clean pad. Push the Delay Start Time pad. START, TIME, CLEAN and “cln” will light up. Use the Hour and Minute pads to set the desired start time. Push the “up” (A) or “down” (V) pad(s) until the correct time shows in the display.
6. When the oven reaches normal baking/ roasting temperatures, LOCKED goes off and “End” and CLEAN TIME come on. Move the Lock Lever back to the left. DO NOT FORCE lT. Wait until it moves easily. To stop the Self-Cleaning cycle at any time: 1. Push the Off/Cancel pad.
Cleaning chart Use the following table to help you clean all parts of your oven. PART Control panel WHAT TO USE Sponge and warm, soapy water OR Paper towel and spray glass cleaner HOW TO CLEAN l Wash, rinse and dry thoroughly. DO NOT USE steel wool or abrasive cleaners.
The oven light The oven light will come on when the oven door is opened. To turn on the light when the oven door is closed, use the Oven Light Switch on the control panel.
If You Need Assistance Or Service This section is designed to help you save the cost of a service call. Part 1 of this section outlines possible problems, their causes, and actions you can take to solve each problem. Parts 2 and 3 tell you what to do if you still need assistance or service.
PROBLEM POSSIBLE CAUSE SOLUTION Cooking results The oven is not level. Level oven. (See Installation Instructions.) are not what you expected The oven temperature seems too Adjust the oven temperature control. low or too high. (See “Adjusting the oven temperature control” on page 12.
2. If you need assistance . . . Call Whirlpool Consumer Assistance Center telephone number. Dial free from anywhere in the U.S.: l-800-253-1301 and talk with one of our trained consultants.
35.
WHIRLPOOL” Microwave Oven/Range Product Warranty LENGTH OF WARRANTY FULL ONE-YEAR WARRANTY From Date of Purchase WHIRLPOOL WlLL PAY FOR FSpb replacement parts and repair labor to correct defects in materials or workmanship. Service must be provided by an authorized Whirlpools’ service company.
An important point after buying a device Whirlpool RM770PXA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RM770PXA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RM770PXA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RM770PXA you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RM770PXA will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RM770PXA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RM770PXA.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RM770PXA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RM770PXA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
