Instruction/ maintenance manual of the product RJH 3330-1 Whirlpool
Go to page of 6
READ AND SAVE THESE INSTRUCTIONS YLrlmml NOTE: The fan in the Microshelf Hood turns on automatically to protect the microwave oven when the temperature inside the hoodreaches 122°F (SO’C). It turns off automatically when the temperature falls below 95°F (35°C).
12” HIGH CABINET +“x IO”ELBOW RAIN CAP SHELF/ HOOD TRANSITION DUCT PROVIDED WITH HOOD Figure 2 II. VENTED INSTALLATION For ventless installation, Kit RCH3630 must be installed. A. Assembling and Installing to Wall 1. Select the area for installation, making sure you have an electrical supply available.
- - -; THICK SHEET ROCK 2s’ SCREW, NO. IO <. U HOLLOW WALL ANCHOR BOLT Figure 5 9. Remove all 4 screws from the anchor bolts. 10. Attach hanging bracket to the wall with the four screws taken from the anchor bolts. Tighten the screws in the anchor bolts until the anchor bolts are completely set.
1. Connect the appliance to the junction box through flexible armoured or nonmetallic sheathed copper cable (with ground wire). A suitable strain relief must be provided at each end of the power supply cable (at appliance and at the junction box). See Figure 8.
Place the microwave oven on the hood shelf on the right hand side of the hood aligning the front and right hand side of the microwave oven with the front and right hand side of the Microshelf Hood. Use the leveling bolts provided to level shelf hood after weight of the appliance is placed on it.
Whirlpool franchised TECH-CARE@ service If your WHIRLPOOL appliance ever needs serviceanywhere in the United States, help is just a phone call away. .to your nearest TECH-CARE service representative.
An important point after buying a device Whirlpool RJH 3330-1 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RJH 3330-1 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RJH 3330-1 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RJH 3330-1 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RJH 3330-1 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RJH 3330-1, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RJH 3330-1.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RJH 3330-1. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RJH 3330-1 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
