Instruction/ maintenance manual of the product RJE-953PP Whirlpool
Go to page of 16
SO-INCHFREE-STANDING EYE-LEVELELECTRICRANGEModeiRJE-953PP /y Oven Vent ne-Piece Chrome Reflector Bowls Hood Knockout Broil Element Model and Serial Number Plate Automatic Oven Bake Element.
Digital Clock 1 Minute Timer A Stan Time Knob I Start Time Knob Upper Oven Signal Light . Upper Oven Temperature Control Knob y Lower Oven Signal Light Upper Oven Selector Knob ’ Lower Oven Temperature Control Knob Lower Oven Selector Knob .
Table of Contents BEFORE USING YOUR RANGE ...... .............. USING THE SURFACE UNIT CONTROLS ........ ..... USING THE OVEN CONTROLS ...................... l Baking.. .................. .................. . Broiling ............................ .. l Variable Broil Feature l Resetting the Oven Ternperature‘Contr’ol.
Using the surface unit controls PUSH IN and turn until the setting shows in the window. To bake, turn the Oven Selector Knob to BAKE. The Surface Unit Control Knobs must be pushed in before turning them. This helps avoid turning them on accidentally when wiping off the Control Panel.
To broil, turn the Oven Selector Knob to BROIL. Upper Oven ALWAYS broil with the door open about 4 inches (10 cm). Broiling: First-Follow the directions below for placlng the meat at the right distance from the Broil Element. Second-Tllrn the Oven Selector to “BROIL.
( Remove the locking 1 screw; NOTICE position of notches. Lower: move black part Lower: move black part toward “LO.” toward “LO.” One notch equals about One notch equals about 10°F (5°C). 10°F (5°C). Higher: move black part toward “HI.” One notch equals about 10°F (S’C).
Usinn the automatic MEALTIMER” clock The automatic feature of the MEALTIMER” Clock lets you be away from home when the oven starts. or when it stops. It will turn on and off automatically, or lust turn off automatically. Either oven can be used. Let’s say you have a roast that will take four hours to cook.
When cooking is finished, turn both the Oven Selector and the Oven Temperature Control Knobs to “OFF” If you want to stop the oven before it stops automatically, turn the Temperature and Selector Knobs to “OFF.” Remove food from the oven. You don’t have to do anything with the Stop Time Knob.
0 @ 00 0 Replace with a 40-watt APPLIANCE bulb. remove screws To replace top light, remove three outer screws. When baking, always leave at least 1% to 2 inches (4-5 cm) of air space between the sides of a pan and other pans and the oven wall for air circulation.
Liquids spread on rough surfaces; bead up on smooth surfaces. Your continuous cleaning ovens How a Continuous Cleaning Oven Works: A standard oven has walls with a smooth porcelain enamel finish. A Continuous Cleaning Oven also has a porcelain enamel finish with one important difference: instead of being smooth, like glass.
Pull knob and trim ring straight out. Remember how the spring goes. 3. Slide the foil sheet under the bake element Make sure it is centered and long enough to start up the sides. 4. When you put the bake element back down. make sure all the feet rest solidly on the foil and that the foil is smoothed out across the bottom of the oven.
1 ,j Terminal To remove surface unit, lift and pull straight out. Hold surface unit level when replacing. Removing surface units and reflector bowls: 1. First. be sure the Surface Unit Controls are all “OFF“ and that the surface units ari’ cool.
a 1 1 Pull straight with the angle of part-open door. Push down evenly. Removing the lower oven door: Removing the oven door may make it easier to clean the oven. To remove the door. first open it to the first stop (about 4 Inches or 10 cm). Take hold of both sides of the door near the top; then lift it at the same angle it is in.
PART WHAT TO USE HOW TO CLEAN Aluminum Warm, soapy water or soapy l Wash with other cooking utensils. broiler pan and steel wool pads grid Control panel Warm. soapy water l Wash. rinse and dry with soft cloth Oven racks Upper oven rack guides Commercial glass cleaner l Follow directions with cleaner.
2. If you need service. : If your WHIRI.F’OOL appliance ever needs service anywhere in the Unltt>d States. help IS lust a phone call away... to your nearest Whlrlpc)c>l franctlwd TECH-CARE- service representative.
jbu’ll find yc)ur nearest TECH-CARE service company listed in your local telephontj book Yellow Pages under Washers/Dryers-Repair- any or Servlclng Should you not find a listing, dial free, the Whirlpool COOL-LINE’ service assistance telephone number (800) 253-1301.
An important point after buying a device Whirlpool RJE-953PP (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RJE-953PP yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RJE-953PP - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RJE-953PP you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RJE-953PP will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RJE-953PP, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RJE-953PP.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RJE-953PP. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RJE-953PP along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
