Instruction/ maintenance manual of the product RJE-390P Whirlpool
Go to page of 16
Vkrlpool ~~-IN~HFREE-S~~DINGELECTRICRANGE MdelsRllE-390P Model and Serial Number Plate _ ______ ---__ _ _ -. Light Switch Removable Storage Drawer FibergIass Heat Seal - Oven Door - Control Panel Chro.
Oven Temperature Oven Top Light Switch Surface Unit Minute Timer Control Knob Selector Knob Oven Signal Light Lock Light Clean Light Oven Light Switch Surface Unit Control Knobs Table of Contents BEFORE USING YOUR RANGE USING THE SURFACE UNIT CONTROLS USING THE OVEN CONTROLS l Baking .
Digital Clock Stop Time Knob Start Time Knob Before using your range IMPORTANT This is the oni) fine print you‘ll find in this booklet. Please read it to be sure you use your range as it was meant to be used. We build appliances to last. but we can‘t control how they are used.
To bake, turn the Oven Selector Knob to BAKE. To broil. turn the Oven Selector Knob to BROIL. ALWAYS broil with the door open about 4 inches (10 cm). Using the Oven Controls Baking: First-Follow the directlons on page 7 for “Positioning Oven Racks.” Second-Turn the Oven Selector Knob to “BAKE.
Loosen the Locking Screw Lower: move black part toward “LO.” One notch equals about 10°F (S’C). Higher: move black part toward “HI.” One notch equals about 10°F (ST). Minute Timer Variable Broil Feature: You migh: want to broil some foods slower than others.
Using the automatic MEALTIMER:’ clock The automatic feature of the MEALTIMER’ Clock lets you be away from home when the oven starts. or when it stops. It will turn on and off automatically. or lust turn off automatically. Let‘s say you have a roast that will take four hours to cook Dinner is supposed to be at 6:O0.
To remove rack, pull forward until rack stops, lift front and pull. When cooking is finished, turn both the Oven Selector and the Oven Temperature Control Knobs to “OFF.” If you want to stop the oven before it stops automatically, turn the Temperature and Selector Knobs to “OFF.
To replace the oven light, remove glass cover. l!!F!ml screws To replace top light, remove two outer screws. When baking, always leave at least 1% to 2 inches (4-5 cm) of air space between the sides of a pan and other pans and the oven wall for air circulation.
Using the Self-Cleaning oven cycle The Self-Cleaning Oven uses high heat that actually burns away oven soil. For best results and safety, read this section carefully.
3. The clock and dials for start and stop time should all have the right time of day. 4. Push in on the Stop Time Knob and set it ahead as many hours as you want for the clean- ing cycle. For a lightly soiled oven, two hours ahead may be enough. For heavy soil, three hours ahead may be about right.
How the Self-Cleaning cycle works: l When oven controls are set to “CLEAN,” the oven gets much hotter than it does for cooking. This high heat causes soil on the inside oven walls to burn off, or break up and mostly disappear. While this is happening, a special part in the oven vent helps remove smoke.
Cleaning and caring for your range Your range is designed to be easy to clean. You will usually wipe off spills and spatters when they happen, but you will sometimes want to clean under and behind the control knobs and surface units This section L3 Off will tell you how to remove those.
Hold surface unit level when replacing. Prop up the top with support rod. Replacinn reflector bowls and surface units: 1 Be sire the surface unit controls are on “OFF” Put the reflector bowls back into their places.
WHAT TO USE HOW TO CLEAN Outside of appliance Soft cloth. warm soapy water l Wipe off regularly when range is cool. Nylon or plastic scouring pad l Do not allow food containing acids (such as for stubborn spots vmegar. tomato. lemon juice or milk) to remain on surface.
IF YOU NEED SERVICE OR HELP, WE SUGGEST YOU FOLLOW THESE THREE STEPS: 1. Before you call for service” : If your range does not seem to be operating properly.
You’ll find your nearest TECH-CARE service company listed in your local telephone book Yellow Pages under Washers/Dryers-Repair- ing or Servicing. Should you not find a listing, dial free, the Whirlpool COOL-LINE” service assistance telephone number (800) 253-1301.
An important point after buying a device Whirlpool RJE-390P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RJE-390P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RJE-390P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RJE-390P you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RJE-390P will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RJE-390P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RJE-390P.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RJE-390P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RJE-390P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
