Instruction/ maintenance manual of the product RJE-362B Whirlpool
Go to page of 16
Ehpool 304NCH FREE-STANDING ELECTRIC RANGE Model RJE-362B -3 1 Control Panel One-Piece + Chrome He /ii Reflector Bowls Model and Serial Number Plate Automatic Oven Light Switch Removable Copy Your Mod.
Oven Signal Light Lock Light Clean Light Oven Temperature Cdntrol Knob Oven Selector Knbb Table of Contents Page BEFORE USING YOUR RANGE USING THE SURFACE UNIT CONTROLS USING THE OVEN CONTROLS l Baking...... l Broiling l Variable Broil Feature l Resetting the Oven Temperature Con&l Knob SETTING THE CLOCK TO THE CORRECT TIME OF DAY.
Surface Unit Signal Light Clock Stop Time Knob Surface Unit Control Knobs Minite Timer Start Time knob Before using vour range IMPORTANT This is the only fine print you‘ll find in this booklet. Please read it to be sure you use your range as it was meant to be used.
PUSH IN and turn to setting. To bake, turn the Oven Selector Knob to BAKE To broil, turn the Oven Selector Knob to BROIL. Using the surface unit controls The Surface Unit Control Knobs must be pushed in before turning them. This helps avoid turning them on accidentally when wiping off the Control Panel.
ALWAYS broil with the door open about 4 inches (10 cm). loosen the Locking Screw Lower: move black part toward “LO.” One notch equals about 10°F (5%).
Clock and Timer Knob Minute Timer Setting the clock to the correct time of day 1 Push in the Minute Timer Knob and turn it clockwise to set the hands to the correct time of day. 2. The Minute Timer hand will turn as you set the clock. When the clock is set, let the knob pop out.
3. Push in and turn the Start Time Knob clockwise to the time you want the oven to start. 5. Turn the Oven Temperature Control Knob to the temper- ature you want to use to cook the food. 4. Push in and turn the Stop Time Knob clockwise to the time you want the oven to stop.
Oven rack positions Your oven has two racks. Always put the racks where you want them to be before you turn on the oven. To remove a rack. take hold of it on the front edge and pull it out until It stops. Then lift LIP the front edge and pull again. It will slide past the stops, out of the guides and out of the oven.
The oven vent There is an ol’en vent under the right rear surface element. When the ol’en is on. heated air will escape through it. A vent is needed for air circulation in the oven durtng baking. You can cook on this surface unit whtle the oven is on A warm pan of food will stay warm on this unit while the oven is on.
Setting the controls to the Self-Cleaning cycle: I CJeleclor I 1. Set the Oven Selector Knob to “CLEAN.” 2. Set the Oven Temperature Control Knob to “CLEAN.” 3. The clock and dials for start and stop time should all have the right time of day.
7. When the oven has cooled ojf all the way, wipe out any residue or ashes from the bottom. How the Self-Cleaning cycle works: l When oven controls are set to “CLEAN.
Special tips: l If the cleaning cycle doesn’t get the oven as clean as it should be. the time set for cleaning was probably not long enough. Set the cleaning time longer next time You can set it for more than 3 hours. if you warlt. l Plan to clean tht> oven hefore it gets too heavily soiled.
I , Terminal To remove surface unit, lift and pull straight out. Hold surface unit level when replacing. Removing surface units and reflector bowls: 1 First.
PART WHAT TO USE HOW TO CLEAN Outslde of appliance Soft cloth. warm soapy water l Wipe off regularly when range is cool. Nylon or plastic scouring pad l Do not allow food containing acids (such as for stubborn spots vinegar. tomato. lemon juice or milk) to remain on surface.
If you need service or help, we suggest you follow these three stem: 1. Before you call for service*: If your range does not seem to be operating properly.
You’ll find your nearest TECH-CARE service company listed in your local telephone book Yellow Pages under APPLIANCES-HOUSE- HOLD-MAJOR-SERVICE AND REPAIR. Should you not find a list- ing, dial free, the Whirlpool COOL-LINE R service assistance telephone number.
An important point after buying a device Whirlpool RJE-362B (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RJE-362B yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RJE-362B - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RJE-362B you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RJE-362B will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RJE-362B, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RJE-362B.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RJE-362B. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RJE-362B along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
