Instruction/ maintenance manual of the product RF4400XL Whirlpool
Go to page of 16
40-INCH FREE-STANDING ELECTRIC RANGE Model RF4400XL -One-Piece Chrome Pdlmrh-- Pa----’ Model and Serial - Number Plate Continuous- - Cleaning Oven Removable - Air-Flow Oven Door Storage- Compartment.
Your responsibilities.. . Proper installation and safe use of your range are your personal responsibilities. Read this “Use and Care Guide” and the “Cooking Guide”carefully for important use and safety information. Installation You must be sure your range Is.
.
Using your range Oven Selector C$2%EEiro, A Surface Unit Controls / I SURFACE UNIT CONTROLS Oven Signal Light Surface UnitVIndicators Surface Unit Signal Light Control knobs must be pushed in before The signal light will glow when a surface turning them to a set- ting.
Automatic MEALTIMER’ Clock Minute Timer Start Time Knob StoD Tlme Knob USING THE MINUTE TIMER 1. Without pushing it in, turn the Minute Bmer 2. Turn the hand back to the setting you want. Knob until the hand passes the setting you 3. When the set time is up, a buzzer will sound.
BAKING OR ROASTING Put the rack(s) where you want them before turning on the oven. Rack(s) should be placed ’ so food can be centered in the oven. Always leave at least I’ 2 to 2 inches (4-5 cm] between the sides of the pan and the oven walls and pans.
BROILING 1. Place the rack where you want it for broiling. 4. Set the Oven Temperature Control on BROIL (or on a lower temperature for slower broiling). 2. Put the broiler pan and food on the rack. 5. During broiling, the oven door must be partly open.
USING THE AUTOMATIC MEALTIMER”: CLOCK The Automatic MEALTIMER Clock is designed to turn the oven on and off at times you setteven when you are not around To start and stop baking automatically: 1. Put the racks where you want them and place the food in the oven.
Hot air and moisture escape from the oven through a vent under the right rear surface unit. You can cook on the unit, or keep food warm on it while the oven is on. Plastic utensils left over the vent can melt. Do not block the vent. Poor baking can result.
Cleaning and caring for your range CONTROL PANEL AND KNOBS 1. Flrst make sure oven and surface unit control knobs are set on OFF. All knobs pull straight off. Surface unit knobs have a collar. 2. Use warm soapy water and a soft cloth to wipe the panel.
REPLACING 1. Be sure surface unit controls are OFF. 2. Line up opening in the reflector bowl with the surface unit receptacle. Terminal 3. Hold the surface unit as level as possible with the terminal just started into the receptacle.
1. Open the door to the broil stop. REPLACING 1. Fit the hinge supports into the openings at the bottom oven corners. 2. Hold the door on both sides and lift slightly to Clear the StoDs in the Lift slightly while sliding the hinge supports into the openings.
TIPS 1. The oven window and racks do not have 3. If you do more broiling than baking, hand the continuous-cleaning surface. Clean cleaning may be needed. them by hand. 4. Use aluminum foil on the oven bot- 2. The oven door does not get as hot as the tom according to instructions.
USING FOIL Foil must be used on the oven bottom to catch spillovers. The foil must be used properly. Cut foil from a roll of heavy-duty 18-inch (45 cm] aluminum foil, or buy a foil kit (Part No. 241430) from your Whirlpool Appliance dealer. Lift the cool bake element slightly to lift the feet off the oven bottom.
CLEANING CHART PART WHAT TO USE HOW TO CLEAN Control knobs Warm, sudsy water and l Wash, rinse and dry well. bristle brush l Do not soak. Control Warm, soapy water l Wash, rinse and dry with soft cloth. panel Commercial glass cleaner l Follow directions with cleaner.
2 l IF YOU NEED SERVICE:‘:: If your WHIRLPOOL” appliance ever needs service anywhere in the United States, help is just a phone call away...to your nearest Whirlpool franchised TECH-CARE R service representative.
An important point after buying a device Whirlpool RF4400XL (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RF4400XL yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RF4400XL - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RF4400XL you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RF4400XL will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RF4400XL, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RF4400XL.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RF4400XL. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RF4400XL along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
