Instruction/ maintenance manual of the product RF366PXX Whirlpool
Go to page of 28
YL+l of 2 Home Apphances Use & Care Guide Automatic MEALTIMER” Oven controls clock/minute time Left surface unit controls Right surface unit controls ceramic Model and Automatic oven Broil eleme.
Contents Page Important Safety Instructions .................. 3 Using Your Range ............ 5 Using the surface units ........ 5 Setting the clock ............. 7 Using the Minute Timer ....... 7 Using the oven controls ....... 8 Using the automatic MEALTIMER’” clock .
Imporbnt Safety Instructions To reduce the risk of fire, electrical shock, injury to persons, or damage when using the range, follow basic precautions, including l Read all instructions before using in or near the range. They could the range. explode or burn.
Important Safety Instructions Continued l Use care when opening oven door. Let hot air or steam escape before removing or replacing food. l Do not heat unopened containers. They could explode. The hot con- tents could cause burns and con- tainer particles could cause injury.
Using Your Range Using the surface units Control knobs must be pushed in before turning them to a settrng. They can be set anywhere between HI and OFF. Surface unit markers The solid dot in the surface unit marker shows which surface unit is turned on by that knob.
Using Your Range Continued Until you get used to the set- tings, use the following as a guide. For best results, start cookrng at the high settrngs; then turn the control knob down to continue cooking. Use HI to start foods cooklng; to bring liquids to a boil.
Setting the clock Push in and turn the Minute Timer Knob to set the Clock. 1. Push in Minute Timer Knob and turn clockwise until clock shows the right time of day. 2. Let the Minute Timer Knob pop out. Turn clockwise until Minute Timer hand points to OFF.
Using Your Range Continued Using the oven controls Baking 1. Position the rack(s) properly before turning on the oven. To change rack position, IiH rack at front and pull out. The rack(s) should be placed so the top of the food will be centered in the oven.
5. When baking is done, turn both the Oven Selector and Oven Tempera- ture Control to OFF. The OVEN HEATING Indicator Light will go off. Adjusting the oven temperature control Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradu- ally without you noticing the change.
Using Your Range Continued Broiling 1. Position the rack before turning the oven on. See a reliable cookbook for recommended rack positions. 2. Put the broiler pan and food on the rack. 3. Close the door to the Broil Stop posi- tion (open about 4 inches, 10.
Using the automatic MEALTIMER’” clock The automatic MEALTIMER’” clock is designed to turn the oven on and off at times you set...even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven, such as meats and casseroles.
Using Your Range Continued To start baking now and stop automatically: 1. Position rack(s) properly and place food in the oven. 2. Make sure the clock is set to the right time of day. 3. Push in and turn the Stop Time Knob clockwise to the time you want the oven to shut off.
The oven vent Hot arr and morsture escape from the oven through a vent on the backguard below the control panel. The vent IS needed for air circulatron. Do not block the vent. Poor baking can result. ““en vent When the oven is ON, pans and pan handles left near the oven vent can become hot enough to burn the user and to melt plastics.
Using Your Range Continued To verify the anti-tip bracket is engaged: l Remove the storage drawer. l Look to see if the anti-tip bracket is attached to floor with screws. l Make sure one rear leveling leg is positioned under the anti-tip bracket. l See Installation Instructions for further details.
Caring For Your Range - Burn and Electrical Shock Hazard Make sure all controls are OFF and the range is cool before cleaning. Failure to do so can re- sult in burns or electrical shock. Control panel and knobs 1. Turn control knobs to the OFF position.
Caring For Your Range Continued Personal Injury Hazard p Allow surface unit and sur- rounding areas to reduce in temperature from hot to warm before removing heavy or sugary spills. Wear protective clothing such as oven mitts. l Do not use cooktop cleaner on a hot cooktop.
Using the Self-Cleaning cycle b Ham B - lean frame Hand clean door around edge I Do not hand clean seal The Self-Cleaning cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how to use the Self-Cleaning cycle safely.
Caring For Your Range Continued Personal Injury and Product Damage Hazard l Do not touch the oven during the Self-Cleaning cycle. It could burn you. l Do not use commercial oven cleaners in your oven. Cleaners may produce hazardous fumes or damage the porcelain finish.
NOTE: Make sure the Start Time Knob is out. L 4. Move the Lock Lever to the right - b - the Clean position. The OVEN HEAT- AX ING Indicator Light will come on. i 5. When the oven temperature exceeds normal baking temperatures, the door can’t be opened and the Lock Lever must not be moved.
Caring For Your Range Continued To stop the Self-Cleaning cycle at any time: How it works During the Self-Cleaning cycle, the oven gets much hotter than it does for baking or broiling., .approximately 875°F (468°C). This heat breaks up grease and soil and burns It off.
Cleaning tips Control knobs Clean with warm soapy water and a soft cloth. l Wash, rinse and dry well. l Do not soak. Control panel Clean with warm soapy water or spray glass cleaner and a soft cloth. l Wash, rinse and dry well. l Follow directions provided with the cleaner.
Caring For Your Range Continued The oven light The oven light will come on when you open the oven door. To turn the light on when the oven door is closed, push the Oven Light Switch on the control panel.
if You Need Service Or Assistance ;;;;ggest you follow these . . 1. Before calling for assistance . Performance problems often result from little things you can find and fix without tools of any kind. If nothing operates: 0 Is the power supply cord plugged into a live circuit with the proper voltage? (See Installation Instructions.
If You Need Service Or Assistance Continued 2. If you need assistance’.. Call Whirlpool COOL-LINE” serv- ice assistance telephone number. Dial free from anywhere in the U.
Notes 25.
Notes 26.
Notes 27.
CleanTop’” Ca-r LENGTHOFWARRANTY FULL ONE-YEAR WARRANTY From Date of Purchase LIMITED FOUR-YEAR WARRANTY Second Through Fifth Year From Date of Purchase WHIRLPOOL WILL PAY FOR FSP’” replacement parts and repair labor to correct defects in material or workmanship.
An important point after buying a device Whirlpool RF366PXX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RF366PXX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RF366PXX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RF366PXX you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RF366PXX will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RF366PXX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RF366PXX.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RF366PXX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RF366PXX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
