Instruction/ maintenance manual of the product RF366BXV Whirlpool
Go to page of 28
Use & Care Guide Automatic MEALTIMER’” clock/minute timer Left surface IT 1 ,I Right surface unit controls Broil element Oven rack temovable storage drawer SELF-CLEANINGDESIGNE~E'" E.
Contents Important Safety Page Instructions. 3 Using Your Range 5 Using the surface units 5 Setting the clock 7 Using the Minute Timer 7 Using the oven controls 8 Using the automatic MEALTIMER’” c.
Important Safety Instructions To reduce the risk of fire, electrical shock, injury to persons, or damage when using the range, follow basic precautions, including l Read all instructions before using not let potholder touch hot heating the range. elements.
Important Safety Instructions Continued l Do not clean door seal. It is essen- l Do not touch surface units, areas tial for a good seal. Care should be near surface units, heating ele- taken not to rub, damage, or move ments or interior surfaces of oven.
Using Your Range . Using the surface units Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF. Surface unit markers The solid dot in the surface unit marker shows which surface unit is turned on by that knob.
Using Your Range Continued Until you get used to the set- tings, use the following as a guide. For best results, start cooking at the high settings; then turn the control knob down to continue cooking. Use HI to start foods cooking; to bring liquids to a boil.
Setting the clock Push in and turn the Minute Timer Knob to set the Clock. 1. Push in Minute Timer Knob and turn clockwise until clock shows the right time of day. 2. Let the Minute Timer Knob pop out. Turn clockwise until Minute Timer hand points to OFF.
Using Your Range Continued Using the oven controls Baking I. Position the rack(s) properly before turning on the oven. To change rack position, lift rack at front and pull out. The rack(s) should be placed so the top of the food will be centered in the oven.
Notches 1 I Tooth 5. When baking is done, turn both the Oven Selector and Oven Tempera- ture Control to OFF. The Oven ON and HEATING Indicator Lights will go off.
Using Your Range Continued Broiling 1. Position the rack before turning the oven on. See “Broil Chart” in the Cooking Guide or a reliable cook- book for recommended rack positions. 2. Put the broiler pan and food on the rack. 3. Close the door to the Broil Stop posi- tion (open about 4 inches, 10.
Using the automatic MEALTIMER’” clock The automatic MEALTIMER’” clock is designed to turn the oven on and off at times you set...even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven, such as meats and casseroles.
Using Your Range Continued To start baking now and stop automatically: 1. Position rack(s) properly and place the food in the oven. 2. Make sure the clock is set to the right time of day. 3. Push in and turn the Stop Time Knob clockwise to the time you want the oven to shut off.
Oien vent The oven vent Hot air and moisture escape from the oven through a vent on the backguard below the control panel. The vent is needed for air circulation. Do not block the vent. Poor baking can result. Burn Hazard When the oven is ON, pans and pan handles left near the oven vent can become hot enough to burn the user and to melt plastics.
Using Your Range Continued Optional rotisserie If you would like a rotisserie for your oven, you can order a kit (Part No. 242985) from your Whrrlpool Dealer.
Caring For Your Range Burn and Electrical Shock Hazard Make sure all controls are OFF and the range is cool before cleaning. Failure to do so can re- sult in burns or electrical shock. Control panel and knobs 1. Pull control knobs straight off. 2. Use warm soapy water and a soft cloth, or spray glass cleaner, to wipe the control panel.
Caring For Your Range Continued For heavy spills: l Carefully scrape heavy spills using a single edge razor blade in a holder while the cooktop is still warm. Personal Injury Hazard l Allow surface unit and sur- rounding area to reduce in tem- perature from hot to warm before removing heavy or sug- ary spills.
Using the Self-Cleaning cycle Do cleah frame Do clean door I Do not clean seal Do not clean center area The Self-Cleaning cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how to use the Self-Cleaning cycle safely.
Caring For Your Range Continued Personal Injury and Product Damage Hazard a Do not touch the oven during the Self-Cleaning cycle. It could burn you. l Do not use commercial oven cleaners in your oven. Cleaners may produce hazardous fumes or damage the porcelain finish.
2. Make sure the Clock. Start and Stop Times all have the right time of day.’ 3. Push in and turn the Stop Time Knob clockwise 2 or 3 hours. l Use 2 hours for light soil. l Use 3 hours or more for moderate to heavy soil. NOTE: Make sure the Start Time Knob is out.
Caring For Your Range Continued To stop the Self-Cleaning cycle at any time: 1. Push in and turn the Stop Time Knob clockwise until it points to the right time of day. 2. Turn the Oven Selector and Oven Temperature Control to OFF. When the Oven LOCKED Indicator Light goes off, move the Lock Lever back to the left.
Cleaning tips Control knobs Clean with warm soapy water and a soft cloth. l Wash, rinse and dry well. l Do not soak. Control panel Clean with warm soapy water or spray glass cleaner and a soft cloth. l Wash, rinse and dry well. l Follow directions provided with the cleaner.
Caring For Your Range Continued The oven light The oven light will come on when you open the oven door. Electrical Shock and Personal Injury Hazard l Make sure oven and light bulb are cool and power to the oven has been turned OFF before replacing the light bulb.
If You Need Service Or Assistance We suggest you follow these steps: 1. Before calling for assistance... Performance problems often result from little things you can find and fix without tools of any kind. If nothing operates: l Is the power supply cord plugged into a live circuit with the proper voltage? (See Installation Instructions.
If You Need Service Or Assistance Continued 2. If you need assistance’... Call Whirlpool COOL-LINE’ serv- ice assistance telephone number. Dial free from anywhere in the U.
Notes 25.
Notes 26.
Notes 27.
Whirlpool’ Range Product Warranty LENGTH OF WARRANTY WHIRLPOOL WILL PAY FOR FULL ONE-YEAR WARRANTY From Date of Purchase FSP@ replacement parts and repair labor to correct defects in materials or workmanship. Service must be provided by an authorized Whirlpool”” service company.
An important point after buying a device Whirlpool RF366BXV (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RF366BXV yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RF366BXV - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RF366BXV you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RF366BXV will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RF366BXV, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RF366BXV.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RF366BXV. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RF366BXV along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
