Instruction/ maintenance manual of the product RF365BXW Whirlpool
Go to page of 28
ELECTRIC RANGE Self-Cleaning Models ;R;;;g (Shown) ahers. Clothes Dryers. Freezers Relrigeralor-Freezer, Ice Makers Dishwashers Built-In Ovens and Surlace Unils, Flanges, Microwave Ovens.
Contents Page BEFORE YOU USE YOUR RANGE. 2 IMPORTANT SAFETY INSTRUCTIONS.. . . 3 PARTS AND FEATURES. 5 USING YOUR RANGE. . 6 Using the Surface Units. 6 Optional Canning Kit.. 7 Setting the Clock 8 Using the Minute Timer. . 8 Using the Oven Controls 9 Baking.
IMPORTANT SAFETY INSTRUCTIONS l Read all instructions before using the range. l Install or locate the range only in accordance with the provided Installation Instructions. It is recom- mended that the range be in- stalled by a qualified installer. The range must be properly con- nected to electrical supply and grounded.
will be damaged and shock or l Do not store things children might fire could result. want above the range. Children l Use care when opening oven could be burned or injured while door. Let hot air or steam escape climbing on it. before removing or replacing l Do not touch surface units, areas food.
Parts and features Models RF375PXW [Shown) & RF365BXW AUTOMATIC OVEN TEMPERATURE CONTROL I RIGHT cowl FR4 ROL CONTROL KNOB CONTROL KNOB INDICATOR LIGHT INDICATOR LIGHT / OVEN VENl CONTROL PANEL PO.
Using your range Using the Surface Units Control knobs must be pushed in before turning them to a setting. They can be set anywhere between HI and OFF. Surface Unit Markers The solid dot in the surface unit marker shows which surface unit is turned on by that knob.
Use only flat-bottomed utensils for best cooking results and to prevent damage to the cooktop. Specialty items with rounded or ridged bottoms (woks, ridged bottom canners or tea kettles) are not recommended.
Setting the Clock Push in and turn the Minute Timer Knob to set the Clock. 1. Push in Minute Timer Knob and turn clockwise until clock shows the right time of day, 2. let the Minute Timer Knob pop out. Turn clockwise until Minute Timer hand points to OFF The clock setting will change if you push in the knob when turning.
Using the Oven Controls Baking I Position the rack(s) properly before turning on the oven. To change rack position, lift rack at front and pull out. 2. Set the Oven Selector on BAKE. The Oven ON Indicator Light will come on. 4. Put food in the oven. During bak- ing, the elements will turn on and off to keep the oven temperature at the setting.
Adjusting the Oven Temperature Control Does your oven seem hotter or colder than your old oven? The temperature of your old oven may have shifted gradually without your noticing the change. Your new oven is properly adjusted to provide accurate temperatures.
Broiling 1. Position the rack before turning the oven on. See “Broil Chart” in the Cooking Guide or a reliable cookbook for recommended rack positions. 3. Close the door to the Broil Stop position (open about 4 inches, 10.2 cm]. The door will stay open by itself.
Using The Automatic MEAITIMER’” Clock The automatic MEALTIMER’” Clock is designed to turn the oven on and off at times you set, even when you are not around. Automatic baking is ideal for foods which do not require a preheated oven, such as meats and casseroles.
To start baking now and stop automatically: 1. Position rack(s) properly and place the food in the oven. 2. Make sure the clock is set to the right time of day. 3. Push in and turn the Stop Time Knob clockwise to the time you want the oven to shut off.
The Storage Drawer The storage drawer is for storing pots and pans. The drawer can be removed to make it easier to clean under the range. Use care when handling the drawer. Removing the storage drawer 1. Empty drawer of any pots and pans before removing drawer.
Optional Rotisserie If you would like a rotisserie for your oven, you can order a kit (Part No. 242985) from your Whirlpool Dealer. The kit includes easy installation instructions.
Surface Units and Reflector Bowls Removing 1. Turn off all surface units. 2. Lift the edge of the unit, opposite the receptacle, just enough to clear the element hold down clip, reflector bowl and trim ring. 3. Pull the surface unit straight away from the receptacle.
Replacing Burn, Electrical Shock and Fire Hazard l Make sure all surface units are OFF before replacing surface units and reflector bowls. Failure to do so can result in burns or electrical shock. l Do not line the reflector bowls with foil. Fire or electrical shock could result.
Lift-Up Cooktop into place. Personal Injury and Product Damage Hazard l Be sure both support rods are fully extended and in the locked position. Failure to do so could result in personal injury from the cooktop accidentally falling. l Do not drop the cooktop.
5. If you want the oven racks to remain shiny, remove from the oven and clean by hand. Otherwise, put oven racks on second and fourth guides (guides are counted from bottom to top). After racks are cleaned in the Self-Cleaning cycle, they become harder to slide.
Setting the Controls Be sure the kitchen is ventilated during the Self-Cleaning cycle. This will help heat, odors and smoke to disappear from the room as quickly as possible. 1. Set the Oven Selector and Oven Temperature Control on CLEAN. 2. Make sure the Clock, Start and Stop Times all have the right time of day.
Special Tips l Keep the kitchen well ventilated during the Self-Cleaning cycle to help get rid of heat, odors and smoke. l Clean the oven before it gets heavily soiled.
Cleaning Chart PART WHAT TO USE HOW TO CLEAN Exterior surfaces Warm soapy water and a l Wipe off regularly when range is soft cloth. cool. Plastic scrubbing pad for l Do not allow iood containing heavily-soiled areas. acids (such as vinegar, tomato, lemon juice or milk) to remain on surface.
The Oven Light The oven light will come on when YOU OP en the oven door. Model RF375PXW only: To turn the light on when the oven door is closed, push the Oven Light Switch on the control panel. Push it again to turn off the light. To Replace: Electrical Shock and Personal Injury Hazard .
If you need service or assistance, we suggest you follow these steps: 1. Before calling for assistance... - Performance problems often result from little things you can find and fix without tools of any kind. If nothlng operates: l Is the power supply cord plugged into a live circuit with the proper volt- age? (See Installation Instructions.
3. If you need service%. Whirlr>ool has a nationwide net- work of autho- rized WhirlpoolSM service comoa- nies. Whirlpool service technicians are trained to fulfill the product warranty and pro- vide after-warranty service, any- where in the United States.
Notes 26.
Notes 27.
WHIRLPOOL’ RANGE PRODUCT r LENGTH OF WARRANlY WHIRLPOOL WILL PAY FOR FULL ONE-YEAR WARRANTY FSPB replacement parts and repair labor to From Date of Purchase correct defects in materials or workmanship. Service must be provided by an authorized WhirlpooF service company.
An important point after buying a device Whirlpool RF365BXW (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RF365BXW yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RF365BXW - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RF365BXW you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RF365BXW will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RF365BXW, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RF365BXW.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RF365BXW. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RF365BXW along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
