Instruction/ maintenance manual of the product RE963PXK Whirlpool
Go to page of 24
013thINCH FREE-STANDING EYE-1EVEk ELECTRKZ RANGE / COntinuous-Cleaning - Upper Oven b “ Plug-In Surface Unlf C’ooktop light Porcelafn4namel Ccpy this r fOrmct1cn I: “lese spaces Keep this book, your warranty ant? sales slop tsgether in a handy place.
Proper instaltation and safe use of your range are your personal responsibilities. Read this “Use and Care Gulde”and the ‘*Cooking Gulde”carefully for important use and safety informatlon.
.
Ushg your range Minute Timer Start Time Knob Upper Oven Selector Lower Oven Signal Light Lower Oven Selector Cooktop Lrght Switch Surface Unit Controls Surface Unrl Signal Lrghts Manual Oven Light Swa.
SETTING THE CLOCK Push in and turn the Minute Timer Knob to set the Clock 1. Push In Mlnute Tlmer Knob and turn 2. let the Mlnute Timer Knob pop out. Turn clockwise until clock digits show the right counterclockwise until the Minute Timer time of day dial shows OFF The clock setting will change it you push in when turning.
Put the rack(s) where you want them before turning on the oven. Rack(s) should be placed so food can be centered in the oven Always leave at least 11 z to 2 inches (4-5 cm) between the sides of the pan and the oven walls and pans. For more information, see the “Cooklng Guide.
BROILING IN EITHER OVEN 1. Place the rack where you 2. Put the broiler pan and 3. Set the Oven Selector on want it for broiling. food on the rack. BROIL. 4. Set the Oven Temperature 5. During broiling, the oven 6. When broiling is done, Control on BROIL (or on a door must be partly turn both knobs to OFF.
USING THE AUIOMETIC MEALTIMER* CLOCK The Automatic MEALTIMER Clock is designed to turn either oven on and off at times you set...even when you are not around. To start and stop baklng automatically: 1. Put the oven rack(s) 2. Make sure the clock is set 3.
THE OVEN VENT Hot air and moisture escape from the lower oven through a vent under the right rear surface unit You can cook on the unit, or keep food warm on it while the oven is on. Plastic utensils left over the vent can melt. Do not block the vent.
THE OVEN LIGHTS Both oven lights will come on when you open the lower oven door. Both will come on when you push the Oven Light switch on the control panel. Close the lower oven door or push the switch again to shut them off To replace the upper oven light bulb: 1.
THE COOKTOP LIGHT To turn on the fluorescent light under the upper oven, push the button on the control panel marked TOP LIGHT. Hold it in for a second before letting it go, Push it again to shut off the light. To replace the light tube: 1. Turn off the electric power at main power supply 2.
Cleaning and caring for your range CONTROL PANEL AND KNOBS 1. First make sure oven and surface unit control knobs are set on OFF. All knobs pull stralght off. Surface unit knobs have 2. Use warm soapy water and a soft cloth to wipe the panel Rinse and wipe dry 3.
REPLACING 1. Be sure surface unit controls are OFF. Opening Receptacle / 2. Line up opening in the reflect& bowl and notch in trim ring with the surface unit receptacle. 3. Hold the surface unit as level as possible with the terminal lust started into the receptacle.
STORAGE DRAWER The storage drawer is for storing pots and pans. Never store anything that can burn or melt in the drawer. The drawer is warm during baking in lower oven. Use care when handling the drawer. REMOVING THE STORAGE DRAWER 1. Pull drawer straight out to 2.
THE CONTINUOUS-CLEANING UPPER CYVEN Standard oven walls are coated with smooth porcelain-enamel. Your continuous-cleaning oven walls are coated with a special, rougher porcelain-enamel.’ A fat spatter beads up on the smooth surface, but spreads out on the rougher surface.
TIPS 1. The oven window and racks are not 3. If you do more broiling than baking, hand coated. Clean them by hand. cleaning may be needed. 2. The oven door does not get as hot as the 4. Use aluminum foil on the oven bot- walls. Some hand cleaning may tom according to instructions.
IHELOWERUVENSELF-CLEANINGCYCLE The lower oven self-cleaning cycle uses very high heat to burn away soil. Before you start, make sure you understand exactly how to use the cycle safely. BEFORE YOU START 4. h!?E sure the motor socket cover is 5. closed if your oven has a rotisserie.
SETTING THE CONTROLS 1. Set the Oven Selector to 2. Set the Oven Tempera- CLEAN. ture Control to CLEAN 4. Push in the Stop Time Knob and turn the hand clockwise about two or three hours. (Two hours for light soil; three or more for heavier soil.) 5. Move the Lock Lever o/l the way to the rrght.
SPECIAL TIPS 1. Keep the kitchen well ventilated during the cleaning cycle to help get rid of normal heat odors and smoke. 2. Clean the oven before it gets heavily soiled. Cleaning a very soiled oven takes longer and results in more smoke than usual. 3.
CLEANING CHART PART Outside of range WHAT TO USE HOW TO CLEAN Soft cloth, warm soapy l Wipe off regularly when range is cool. water l Do not allow food containing acids Nylon or plastic scouring (such as vinegar, tomato, lemon juice or pad for stubborn spots milk) to remain on surface.
If you need service or assistance, we suggest you foltow these four steps: - 1 l Before calling for assistance.. . Performance problems often result from little things you can find and fix yourself with- out tools of any kind.
2 l If you need as&stance * . . . Call the Whlrlpool COOL-LINER service as- slstance telephone number. Dlal tree trom: Contlnental U.S. . . . . . . . m (800) 253-1301 Mlchlgan . . . . . . . . . . . . . . . . (800) 632-2243 Alaska I Hawall . . . . .
THIS PAGE INTENTIONALLY LEFT BLANK.
FSP quality parts. look for this symbol of qualily whenever you need a replacement port @J tor your Whlrlpool appliance FSP replacement ports Will fit right and work right, because they ore made to the same exacting specifications used to build every new Whirlpool appliance 0 FSP is a regislefed trademark of Whirlpool Corporohon for Benton Harbor.
An important point after buying a device Whirlpool RE963PXK (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RE963PXK yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RE963PXK - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RE963PXK you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RE963PXK will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RE963PXK, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RE963PXK.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RE963PXK. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RE963PXK along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
