Instruction/ maintenance manual of the product RCH3660 Whirlpool
Go to page of 6
VENTED KITCHEN SHELF HOOD FOR 120 V. OPERATION IMPORTANT FOR VENTLESS INSTALLATION, DIS- REGARD THIS INSTRUCTION SHEET. USE VENTLESS KIT INSTRUCTION SHEET FOR MODEL RCH3660. KITCHEN RANGE HOOD I MODEL RH3330XL-1 READ AND SAVE THESE INSTRUCTIONS Before you begin, read the following instructions completely and carefully.
INSTALLATION REQUIREMENTS A. Space Requirements A typical installation can be seen in Figure 1. Study Figure 1 before proceeding. The shelf hood requires an opening that is 30” wide. It is recommended that the cabinet above the cooktop be a maximum of 15” high.
CAUTION: If two studs are not located on the line drawn (Figure 5). DO NOT attempt to install the hood. NOTE: If the shelf hood is to be installed above a Freestanding Range, disconnect the power from the range and move the range out of the opening in the cabinets.
FRONT PANEL REMOVAL 1. Remove the three screws that secure the front panel; lower and remove front panel. 2. This appliance is equipped with copper lead wires.
,WIRING DONE ACCORDING TO NATIONAL ELECTRICAL CODE AND APPLICABLE LOCAL CODES1 RECEPTACLE TERMINAL ACCESS COYER Figure 13 FILTER CLIPS INSTALLING MICROWAVE OVEN 1. Place the microwave oven on the shelf hood in the center of the hood. 2. Use the leveling bolts provided to level the shelf hood after the weight of the appliance is placed on it.
SIDE PANEL INSTALLATION The side panels can be used to fill the space left on a 30”shelf hood when the microwave oven is centered on the hood. Locate the magnetic tape on the side panels prior to installation. (Figure 20). The front of the side fillers should be located 5/16” back from the front of the Micro Shelf hood.
An important point after buying a device Whirlpool RCH3660 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Whirlpool RCH3660 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Whirlpool RCH3660 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Whirlpool RCH3660 you will learn all the available features of the product, as well as information on its operation. The information that you get Whirlpool RCH3660 will certainly help you make a decision on the purchase.
If you already are a holder of Whirlpool RCH3660, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Whirlpool RCH3660.
However, one of the most important roles played by the user manual is to help in solving problems with Whirlpool RCH3660. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Whirlpool RCH3660 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
